MagicMirror not working after upgrade

sdetweil · Jan 22, 2025, 3:21 PM

@pat59 in the 1st above

you are already running MM
so you should use the upgrade script… not install

this is install
 bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)”

install should have aborted, cause you already have MM
can you show me ~/install.log

then you run the two upgrade scripts, one test and (if all is ok with test) then execute, two different copy/paste

can you show me ~/MagicMirror/installers/upgrade.log

the error means your nodejs did NOT get updated.
but somehow the new MM code was installed…

pat59 · Jan 22, 2025, 3:27 PM

patrick@raspberrypi:~ $ cd ~/install.log
bash: cd: /home/patrick/install.log: N’est pas un dossier
patrick@raspberrypi:~ $

pat59 · Jan 22, 2025, 3:30 PM

patrick@raspberrypi:~ $ cd ~/install.log
bash: cd: /home/patrick/install.log: N’est pas un dossier
patrick@raspberrypi:~ $ cd ~/MagicMirror/installers/upgrade.log
bash: cd: /home/patrick/MagicMirror/installers/upgrade.log: N’est pas un dossier
patrick@raspberrypi:~ $

pat59 · Jan 22, 2025, 3:41 PM

patrick@raspberrypi:~ $ bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)”

$$\ $$\ $$\ $$\ $$\ $$\ $$$$$$
$$$\ $$$ | _| $$$\ $$$ |_| $$ $$
$$$$\ $$$$ | $$$$$$\ $$$$$$\ $$\ $$$$$$$\ $$$$\ $$$$ |$$\ $$$$$$\ $$$$$$\ $$$$$$\ $$$$$$\ _/ $$ |
$$$$$$ $$ | _$$\ $$ $$\ $$ |$$ |$$$$$$ $$ |$$ |$$ $$\ $$ $$\ $$ $$\ $$ $$\ $$$$$$ |
$$ $$$ $$ | $$$$$$$ |$$ / $$ |$$ |$$ / $$ $$$ $$ |$$ |$$ | _|$$ | _|$$ / $$ |$$ | _|$$ /
$$ |$ /$$ |$$ __$$ |$$ | $$ |$$ |$$ | $$ |$ /$$ |$$ |$$ | $$ | $$ | $$ |$$ | $$ |
$$ | _/ $$ |$$$$$$$ |$$$$$$$ |$$ |$$$$$$$\ $$ | _/ $$ |$$ |$$ | $$ | $$$$$$ |$$ | $$$$$$$$
_| _| _| _$$ |_| _|_| _|_|_| __| _/ _| _______|
$$\ $$ |
$$$$$$ |
_____/

install log being saved to /home/patrick/install.log
Updating packages …
[ <=> ]
Installing helper tools …
Check current Node installation …
Node currently installed. Checking version number.
Minimum Node version: v20.18.1
Installed Node version: v20.9.0
Node should be upgraded.
A Node process is currently running. Can’t upgrade.
Please quit all Node processes and restart the installer.

patrick 1987 1972 0 16:19 ? 00:00:00 sh -c DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js patrick 1988 1987 0 16:19 ? 00:00:00 node ./node_modules/.bin/electron js/electron.js patrick 1998 1988 0 16:19 ? 00:00:04 /home/patrick/MagicMirror/node_modules/electron/dist/electron js/electron.js patrick 2001 1998 0 16:19 ? 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=zygote --no-zygote-sandbox patrick 2002 1998 0 16:19 ? 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=zygote patrick 2004 2002 0 16:19 ? 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=zygote patrick 2040 2001 0 16:19 ? 00:00:01 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=gpu-process --enable-crash-reporter=3d6a43f6-4bcd-43f9-87e0-3874dce0da58,no_channel --user-data-dir=/home/patrick/.config/Electron --gpu-preferences=WAAAAAAAAAAgAAAEAAAAAAAAAAAAAAAAAABgAAAAAAA4AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABAAAAGAAAAAAAAAAYAAAAAAAAAAgAAAAAAAAACAAAAAAAAAAIAAAAAAAAAA== --shared-files --field-trial-handle=0,i,12195679081471275551,8574617561069742386,262144 --enable-features=kWebSQLAccess --disable-features=SpareRendererForSitePerProcess --variations-seed-version patrick 2046 1998 0 16:19 ? 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=utility --utility-sub-type=network.mojom.NetworkService --lang=fr --service-sandbox-type=none --enable-crash-reporter=3d6a43f6-4bcd-43f9-87e0-3874dce0da58,no_channel --user-data-dir=/home/patrick/.config/Electron --shared-files=v8_context_snapshot_data:100 --field-trial-handle=0,i,12195679081471275551,8574617561069742386,262144 --enable-features=kWebSQLAccess --disable-features=SpareRendererForSitePerProcess --variations-seed-version patrick 2070 2040 0 16:20 ? 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=broker patrick 2082 2060 0 16:20 pts/0 00:00:00 sh -c DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js patrick 2083 2082 0 16:20 pts/0 00:00:00 node ./node_modules/.bin/electron js/electron.js patrick 2093 2083 0 16:20 pts/0 00:00:03 /home/patrick/MagicMirror/node_modules/electron/dist/electron js/electron.js patrick 2096 2093 0 16:20 pts/0 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=zygote --no-zygote-sandbox patrick 2097 2093 0 16:20 pts/0 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=zygote patrick 2099 2097 0 16:20 pts/0 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=zygote patrick 2129 2096 0 16:20 pts/0 00:00:01 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=gpu-process --enable-crash-reporter=3d6a43f6-4bcd-43f9-87e0-3874dce0da58,no_channel --user-data-dir=/home/patrick/.config/Electron --gpu-preferences=WAAAAAAAAAAgAAAEAAAAAAAAAAAAAAAAAABgAAAAAAA4AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABAAAAGAAAAAAAAAAYAAAAAAAAAAgAAAAAAAAACAAAAAAAAAAIAAAAAAAAAA== --shared-files --field-trial-handle=0,i,3246569436277859428,16865193471212064356,262144 --enable-features=kWebSQLAccess --disable-features=SpareRendererForSitePerProcess --variations-seed-version patrick 2131 2093 0 16:20 pts/0 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=utility --utility-sub-type=network.mojom.NetworkService --lang=fr --service-sandbox-type=none --enable-crash-reporter=3d6a43f6-4bcd-43f9-87e0-3874dce0da58,no_channel --user-data-dir=/home/patrick/.config/Electron --shared-files=v8_context_snapshot_data:100 --field-trial-handle=0,i,3246569436277859428,16865193471212064356,262144 --enable-features=kWebSQLAccess --disable-features=SpareRendererForSitePerProcess --variations-seed-version patrick 2138 2129 0 16:20 pts/0 00:00:00 /home/patrick/MagicMirror/node_modules/electron/dist/electron --type=broker
patrick@raspberrypi:~ $
bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)”
update log will be in /home/patrick/MagicMirror/installers/upgrade.log

doing test run = true, NO updates will be applied!

Check current Node installation …
Node currently installed. Checking version number.
Minimum Node version: v20.18.1
Installed Node version: v20.9.0
Node should be upgraded.
MagicMirror running under control of PM2, stopping

sdetweil · Jan 22, 2025, 4:10 PM

@pat59 said in electron:

doing test run = true, NO updates will be applied!

ok, you have install.log (not cd, cat to dump out contents, or nano to edit and view contents)

you DIDN’T have upgrade.log as you hadn’t run upgrade yet

things to know

install WILL NOT install OVER an existing MM system… you do NOT need me to screw up your setup
upgrade is dangerous, so I provide TWO paths
a . test for anything dangerous, lose files, lose changes, whatever … BUT DO NOT CHANGE ANYTHING

b. EXECUTE the upgrade, make changes,
the script for 2 (upgrade) is the same for and and b, but no parameters for test, and apply parameter for execute
(I provide 2 links so you don’t have to remember)

but, I still don’t know how you got the code installed…
did you do the manual upgrade attempt first

   git pull && npm run install-mm

and it failed (cause you don’t have the right version of nodejs installed…)

SO, there is ONE more step

copy/paste the execute link
BUT change the word
apply
to
force

I don’t document this one as I don’t want people using it accidentally

now, please excuse my rudeness here… I see french is your native language…, you DO know you can TRANSLATE my module readme page, in the browser, right?
and if you do so and still don’t understand what I wrote, I am happy to make corrections that would make things more clear. I appreciate your input, I want to make this safe and reliable and easy to use

we can take that discussion offline. If you write to me in french I will translate and return my response in french

pat59 · Jan 22, 2025, 4:58 PM

merci pour votre gentillesse je suis novice désolé de prendrez de votre temps encore merci
voila ce que je viens de faire pour la mise a niveau.

patrick@raspberrypi:~ $ cd ~/MagicMirror
patrick@raspberrypi:~/MagicMirror $ bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)”
update log will be in /home/patrick/MagicMirror/installers/upgrade.log

doing test run = true, NO updates will be applied!

Check current Node installation …
Node currently installed. Checking version number.
Minimum Node version: v20.18.1
Installed Node version: v20.9.0
Node should be upgraded.
Node.js upgrade defered, doing test run
Check current NPM installation …
NPM currently installed. Checking version number.
Minimum npm version: V10.8.2
Installed npm version: V10.1.0
npm should be upgraded.
npm upgrade defered, doing test run …

saving custom.css
(23) Failed writing body
upgrading from version 2.30.0 to 2.30.0
fetching latest revisions

Checking for modules with removed libraries

updating dependencies for active modules with package.json files

processing for module MMM-Remote-Control please wait

----------------------------------

skipped processing for MMM-Remote-Control, doing test run

processing complete for module MMM-Remote-Control


processing for module MMM-Saint please wait

----------------------------------

skipped processing for MMM-Saint, doing test run

processing complete for module MMM-Saint


processing for module MMM-network-signal please wait

----------------------------------

skipped processing for MMM-network-signal, doing test run

processing complete for module MMM-network-signal


processing for module MMM-FlipClock please wait

----------------------------------

skipped processing for MMM-FlipClock, doing test run

processing complete for module MMM-FlipClock


processing for module MMM-BME280 please wait

----------------------------------

skipped processing for MMM-BME280, doing test run

processing complete for module MMM-BME280


processing for module MMM-PrixCarburants please wait

----------------------------------

skipped processing for MMM-PrixCarburants, doing test run

processing complete for module MMM-PrixCarburants


processing for module MMM-MeteoFrance please wait

----------------------------------

skipped processing for MMM-MeteoFrance, doing test run

processing complete for module MMM-MeteoFrance


processing for module MMM-FranceInfo please wait

----------------------------------

skipped processing for MMM-FranceInfo, doing test run

processing complete for module MMM-FranceInfo


processing for module MMM-SnowEffect please wait

----------------------------------

skipped processing for MMM-SnowEffect, doing test run

processing complete for module MMM-SnowEffect

restoring custom.css
patrick@raspberrypi:~/MagicMirror $

sdetweil · Jan 22, 2025, 5:07 PM

@pat59 c’est à nouveau le test.
— faire un test = true, AUCUNE mise à jour ne sera appliquée !—

vous avez besoin de la deuxième URL avec le mot « postuler » à la fin
et tu dois changer le mot

‘appliquer’

à

‘forcer’

veuillez utiliser les mots anglais ici, le traducteur ne m’a pas donné la possibilité de désactiver cela

nous sommes tous novices dans beaucoup de choses dans notre vie, nous apprenons tous à notre rythme. J’espère que mes outils nous faciliteront la tâche.

pat59 · Jan 22, 2025, 5:21 PM

j ai fait la mise a niveau par smartphone RemoteControl.
patrick@raspberrypi:~/MagicMirror $ bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)” forcer
update log will be in /home/patrick/MagicMirror/installers/upgrade.log
doing test run = false
Node currently installed. Checking version number.
Minimum Node version: v20.18.1
Installed Node version: v20.9.0
installing correct version of node and npm, please wait
Check current Node installation …
Node currently installed. Checking version number.
Minimum Node version: v20.18.1
Installed Node version: v20.18.1
No Node.js upgrade necessary.
Check current NPM installation …
NPM currently installed. Checking version number.
Minimum npm version: V10.8.2
Installed npm version: V10.8.2
No npm upgrade necessary.

saving custom.css
upgrading from version 2.30.0 to 2.30.0
fetching latest revisions
updating MagicMirror runtime, please wait

magicmirror@2.30.0 postinstall
npm run install-vendor && npm run install-fonts && echo "MagicMirror² installation finished successfully!
"

magicmirror@2.30.0 install-vendor
echo "Installing vendor files …
" && cd vendor && npm install --loglevel=error --no-audit --no-fund --no-update-notifier

Installing vendor files …

added 1 package, and changed 2 packages in 12s

magicmirror@2.30.0 install-fonts
echo "Installing fonts …
" && cd fonts && npm install --loglevel=error --no-audit --no-fund --no-update-notifier

Installing fonts …

changed 2 packages in 7s
MagicMirror² installation finished successfully!

magicmirror@2.30.0 prepare
[ -f node_modules/.bin/husky ] && husky || echo no husky installed.

no husky installed.

added 479 packages in 3m

126 packages are looking for funding
run npm fund for details

Checking for modules with removed libraries

updating dependencies for active modules with package.json files

processing for module MMM-Remote-Control please wait

----------------------------------

added 49 packages, and audited 50 packages in 9s

13 packages are looking for funding
run npm fund for details

found 0 vulnerabilities

processing complete for module MMM-Remote-Control


processing for module MMM-Saint please wait

----------------------------------

astuce: Tirer sans spécifier comment réconcilier les branches divergentes
astuce: est découragé. Vous pouvez éliminer ce message en lançant une des
astuce: commandes suivantes avant votre prochain tirage :
astuce:
astuce: git config pull.rebase false # fusion (stratégie par défaut)
astuce: git config pull.rebase true # rebasage
astuce: git config pull.ff only # avance rapide seulement
astuce:
astuce: Vous pouvez remplacer “git config” par “git config --global” pour que
astuce: ce soit l’option par défaut pour tous les dépôts. Vous pouvez aussi
astuce: passer --rebase, --no-rebase ou --ff-only sur la ligne de commande pour
astuce: remplacer à l’invocation la valeur par défaut configurée.

processing complete for module MMM-Saint


processing for module MMM-network-signal please wait

----------------------------------

added 1 package, and audited 2 packages in 3s

found 0 vulnerabilities

processing complete for module MMM-network-signal


processing for module MMM-FlipClock please wait

----------------------------------

added 1 package, and audited 2 packages in 4s

found 0 vulnerabilities

processing complete for module MMM-FlipClock


processing for module MMM-BME280 please wait

----------------------------------

added 1 package, and audited 2 packages in 7s

found 0 vulnerabilities

processing complete for module MMM-BME280


processing for module MMM-PrixCarburants please wait

----------------------------------

astuce: Tirer sans spécifier comment réconcilier les branches divergentes
astuce: est découragé. Vous pouvez éliminer ce message en lançant une des
astuce: commandes suivantes avant votre prochain tirage :
astuce:
astuce: git config pull.rebase false # fusion (stratégie par défaut)
astuce: git config pull.rebase true # rebasage
astuce: git config pull.ff only # avance rapide seulement
astuce:
astuce: Vous pouvez remplacer “git config” par “git config --global” pour que
astuce: ce soit l’option par défaut pour tous les dépôts. Vous pouvez aussi
astuce: passer --rebase, --no-rebase ou --ff-only sur la ligne de commande pour
astuce: remplacer à l’invocation la valeur par défaut configurée.

processing complete for module MMM-PrixCarburants


processing for module MMM-MeteoFrance please wait

----------------------------------

astuce: Tirer sans spécifier comment réconcilier les branches divergentes
astuce: est découragé. Vous pouvez éliminer ce message en lançant une des
astuce: commandes suivantes avant votre prochain tirage :
astuce:
astuce: git config pull.rebase false # fusion (stratégie par défaut)
astuce: git config pull.rebase true # rebasage
astuce: git config pull.ff only # avance rapide seulement
astuce:
astuce: Vous pouvez remplacer “git config” par “git config --global” pour que
astuce: ce soit l’option par défaut pour tous les dépôts. Vous pouvez aussi
astuce: passer --rebase, --no-rebase ou --ff-only sur la ligne de commande pour
astuce: remplacer à l’invocation la valeur par défaut configurée.

processing complete for module MMM-MeteoFrance


processing for module MMM-FranceInfo please wait

----------------------------------

astuce: Tirer sans spécifier comment réconcilier les branches divergentes
astuce: est découragé. Vous pouvez éliminer ce message en lançant une des
astuce: commandes suivantes avant votre prochain tirage :
astuce:
astuce: git config pull.rebase false # fusion (stratégie par défaut)
astuce: git config pull.rebase true # rebasage
astuce: git config pull.ff only # avance rapide seulement
astuce:
astuce: Vous pouvez remplacer “git config” par “git config --global” pour que
astuce: ce soit l’option par défaut pour tous les dépôts. Vous pouvez aussi
astuce: passer --rebase, --no-rebase ou --ff-only sur la ligne de commande pour
astuce: remplacer à l’invocation la valeur par défaut configurée.

processing complete for module MMM-FranceInfo


processing for module MMM-SnowEffect please wait

----------------------------------

up to date, audited 1 package in 2s

found 0 vulnerabilities

processing complete for module MMM-SnowEffect

restoring custom.css
patrick@raspberrypi:~/MagicMirror $

sdetweil · Jan 22, 2025, 5:27 PM

@pat59 bien … vous devriez pouvoir redémarrer MagicMirror maintenant

cela aurait dû apparaître lors du test

traitement pour le module MMM-Saint veuillez patienter

astuce : Tirer sans comment réconcilier les branches divergentes

Je ne sais pas pourquoi ils ne l’ont pas fait. je vais regarder ça
Je ne « mets pas à jour » les modules, seulement le MM de base

sdetweil · Jan 22, 2025, 5:33 PM

@pat59 ok, ces erreurs viennent du processus de mise à jour du module, il faudra que l’auteur les regarde

@bugsounet
pouvez-vous examiner pourquoi il a eu ces erreurs même si vous avez effectué la réinitialisation matérielle de git ?

ma mise à niveau appelée npm run update