Netatmo module will not shown

kusselin · Apr 27, 2025, 9:52 AM

so I’ll contact you again…es is displayed…perfekr…I took the template from SAM here and then adapted it again accordingly…now it works…thanks to everyone and especially once again to SAM …;-)

Lusbueb · Apr 27, 2025, 6:53 PM

@kusselin
In your configuration, I’m missing the entry modulOrder. This entry was essential for me! I initially used the default name until I realized that it only works if the module name is stored exactly as you configured it in the web-app (https://auth.netatmo.com/de-de/access/login):

my config:

		{
		module: 'netatmo',
		position: 'middle_center', // the location where the module should be displayed
		config: {
			clientId: '*myID*', // your app id
			clientSecret: '*mysecret*', // your app secret
			refresh_token: *'mytoken*', // your generated refresh token
			moduleOrder: ["Outdoor","Regen","Wind","Schlafzimmer","Wohnzimmer"], //take same names from web-app!
			updateInterval: 6, // every 3 minutes, refresh interval on netatmo is 10 minutes
			animationSpeed: 1000,
			design: 'bubbles', // classic or bubbles
			horizontal: false,
			lastMessageThreshold: 600, // in seconds (10 minutes)
			showLastMessage: true,
			showBattery: true,
			showRadio: true,
			showWiFi: true,
			showTrend: true,
			showMeasurementIcon: true,
			showMeasurementLabel: true,
			showStationName: false,
			showModuleNameOnTop: true,
			fontClassModuleName: 'small', // xsmall, small, medium, large, xlarge
			fontClassPrimary: 'large',
			fontClassSecondary: 'xsmall',
			fontClassMeasurement: 'xsmall',
			thresholdCO2Average: 800,
			thresholdCO2Bad: 1800,
			mockData: false,
		}
		},

https://home.netatmo.com/control/dashboard

MM:

sdetweil · Apr 27, 2025, 11:26 AM

@kusselin congratulations!!! i’m glad you got it working

kusselin · Apr 27, 2025, 6:53 PM

@Lusbueb said in Netatmo module will not shown:

@kusselin
In your configuration, I’m missing the entry modulOrder. This entry was essential for me! I initially used the default name until I realized that it only works if the module name is stored exactly as you configured it in the web-app (https://auth.netatmo.com/de-de/access/login):

my config:

		{
		module: 'netatmo',
		position: 'middle_center', // the location where the module should be displayed
		config: {
			clientId: '*myID*', // your app id
			clientSecret: '*mysecret*', // your app secret
			refresh_token: *'mytoken*', // your generated refresh token
			moduleOrder: ["Outdoor","Regen","Wind","Schlafzimmer","Wohnzimmer"], //take same names from web-app!
			updateInterval: 6, // every 3 minutes, refresh interval on netatmo is 10 minutes
			animationSpeed: 1000,
			design: 'bubbles', // classic or bubbles
			horizontal: false,
			lastMessageThreshold: 600, // in seconds (10 minutes)
			showLastMessage: true,
			showBattery: true,
			showRadio: true,
			showWiFi: true,
			showTrend: true,
			showMeasurementIcon: true,
			showMeasurementLabel: true,
			showStationName: false,
			showModuleNameOnTop: true,
			fontClassModuleName: 'small', // xsmall, small, medium, large, xlarge
			fontClassPrimary: 'large',
			fontClassSecondary: 'xsmall',
			fontClassMeasurement: 'xsmall',
			thresholdCO2Average: 800,
			thresholdCO2Bad: 1800,
			mockData: false,
		}
		},

https://home.netatmo.com/control/dashboard

MM:

Thanks s lot for your config…i changed it and now ist good and the netatmo Modul is running very well

kusselin · May 2, 2025, 7:13 PM

Hello everyone, netatmo is no longer working today :-(
I haven’t changed anything

sdetweil · May 2, 2025, 7:57 PM

@kusselin need to see the logs again

always 1st place to look

kusselin · May 3, 2025, 2:45 PM

@sdetweil

Hi sam, look here again…

verbose cli /usr/bin/node /usr/bin/npm
1 info using npm@10.9.2
2 info using node@v22.15.0
3 silly config load:file:/usr/lib/node_modules/npm/npmrc
4 silly config load:file:/opt/magicmirror/.npmrc
5 silly config load:file:/root/.npmrc
6 silly config load:file:/usr/etc/npmrc
7 verbose title npm run seerver
8 verbose argv "run" "seerver"
9 verbose logfile logs-max:10 dir:/root/.npm/_logs/2025-05-03T14_24_21_403Z-
10 verbose logfile /root/.npm/_logs/2025-05-03T14_24_21_403Z-debug-0.log
11 silly logfile start cleaning logs, removing 1 files
12 silly logfile done cleaning log files
13 verbose stack Error: Missing script: "seerver"
13 verbose stack
13 verbose stack Did you mean this?
13 verbose stack   npm run server # run the "server" package script
13 verbose stack
13 verbose stack To see a list of scripts, run:
13 verbose stack   npm run
13 verbose stack     at #run (/usr/lib/node_modules/npm/lib/commands/run-script.js:111:13)
13 verbose stack     at async RunScript.exec (/usr/lib/node_modules/npm/lib/commands/run-script.js:40:7)
13 verbose stack     at async Npm.exec (/usr/lib/node_modules/npm/lib/npm.js:207:9)
13 verbose stack     at async module.exports (/usr/lib/node_modules/npm/lib/cli/entry.js:74:5)
14 error Missing script: "seerver"
14 error
14 error Did you mean this?
14 error   npm run server # run the "server" package script
14 error
14 error To see a list of scripts, run:
14 error   npm run
15 verbose cwd /opt/magicmirror
16 verbose os Linux 6.8.12-8-pve
17 verbose node v22.15.0
18 verbose npm  v10.9.2
19 verbose exit 1
20 verbose code 1
21 error A complete log of this run can be found in: /root/.npm/_logs/2025-05-03T14_24_21_403Z-debug-0.log

and the latest Log:

0 verbose cli /usr/bin/node /usr/bin/npm
1 info using npm@10.9.2
2 info using node@v22.15.0
3 silly config load:file:/usr/lib/node_modules/npm/npmrc
4 silly config load:file:/opt/magicmirror/.npmrc
5 silly config load:file:/root/.npmrc
6 silly config load:file:/usr/etc/npmrc
7 verbose title npm run server
8 verbose argv "run" "server"
9 verbose logfile logs-max:10 dir:/root/.npm/_logs/2025-05-03T14_24_50_844Z-
10 verbose logfile /root/.npm/_logs/2025-05-03T14_24_50_844Z-debug-0.log
11 silly logfile start cleaning logs, removing 1 files
12 silly logfile done cleaning log files
13 verbose cwd /opt/magicmirror
14 verbose os Linux 6.8.12-8-pve
15 verbose node v22.15.0
16 verbose npm  v10.9.2
17 verbose exit 0
18 info ok

here is the info wenn i go into /opt/magicmirror/ and “npm run server”:

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sat May  3 16:23:40 2025 from 192.168.200.219

MagicMirror LXC Container
    🌐   Provided by: community-scripts ORG | GitHub: https://github.com/community-scripts/ProxmoxVE

    🖥️   OS: Debian GNU/Linux - Version: 12
    🏠   Hostname: magicmirror-live
    💡   IP Address: 192.168.200.74
root@magicmirror-live:~# cd /opt/magicmirror
root@magicmirror-live:/opt/magicmirror# npm run server

> magicmirror@2.31.0 server
> node ./serveronly

[2025-05-03 16:40:49.450] [LOG]   Starting MagicMirror: v2.31.0
[2025-05-03 16:40:49.469] [LOG]   Loading config ...
[2025-05-03 16:40:49.470] [LOG]   config template file not exists, no envsubst
[2025-05-03 16:40:49.876] [INFO]  Checking config file /opt/magicmirror/config/config.js ...
[2025-05-03 16:40:49.930] [INFO]  Your configuration file doesn't contain syntax errors :)
[2025-05-03 16:40:49.931] [INFO]  Checking modules structure configuration ...
[2025-05-03 16:40:50.003] [INFO]  Your modules structure configuration doesn't contain errors :)
[2025-05-03 16:40:50.519] [LOG]   Loading module helpers ...
[2025-05-03 16:40:50.528] [LOG]   No helper found for module: alert.
[2025-05-03 16:40:50.551] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:50.555] [LOG]   Module helper loaded: updatenotification
[2025-05-03 16:40:50.557] [LOG]   No helper found for module: clock.
[2025-05-03 16:40:50.934] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:50.936] [LOG]   Module helper loaded: calendar
[2025-05-03 16:40:50.941] [LOG]   No helper found for module: compliments.
[2025-05-03 16:40:50.943] [LOG]   No helper found for module: MMM-OpenmapWeather.
[2025-05-03 16:40:50.950] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:50.952] [LOG]   Module helper loaded: netatmo
[2025-05-03 16:40:50.954] [WARN]  No /opt/magicmirror/modules/MMM-OpenWeatherForecast/MMM-OpenWeatherForecast.js found for module: MMM-OpenWeatherForecast.
[2025-05-03 16:40:50.955] [LOG]   No helper found for module: MMM-OpenWeatherForecast.
[2025-05-03 16:40:50.955] [LOG]   No helper found for module: MMM-Blitzer.
[2025-05-03 16:40:50.958] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:50.960] [LOG]   Module helper loaded: MMM-ApothekenNotdienst
[2025-05-03 16:40:50.962] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:50.965] [LOG]   Module helper loaded: MMM-ioBroker
[2025-05-03 16:40:50.965] [LOG]   No helper found for module: MMM-Carousel.
[2025-05-03 16:40:51.040] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:51.040] [LOG]   Module helper loaded: MMM-PublicTransportHafas
[2025-05-03 16:40:51.480] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:51.480] [LOG]   Module helper loaded: MMM-RNV
[2025-05-03 16:40:51.482] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:51.482] [LOG]   Check MagicMirror² version for node helper 'MMM-Fuel' - Minimum version: 2.15.0 - Current version: 2.31.0
[2025-05-03 16:40:51.482] [LOG]   Version is ok!
[2025-05-03 16:40:51.483] [LOG]   Module helper loaded: MMM-Fuel
[2025-05-03 16:40:51.591] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:51.591] [LOG]   Module helper loaded: MMM-Remote-Control
[2025-05-03 16:40:51.658] [LOG]   Initializing new module helper ...
[2025-05-03 16:40:51.659] [LOG]   Module helper loaded: newsfeed
[2025-05-03 16:40:51.659] [LOG]   All module helpers loaded.
[2025-05-03 16:40:51.663] [LOG]   Starting server on port 8080 ...
[2025-05-03 16:40:51.664] [WARN]  You're using a full whitelist configuration to allow for all IPs
[2025-05-03 16:40:51.673] [ERROR] Whoops! There was an uncaught exception...
[2025-05-03 16:40:51.673] [ERROR] Error: listen EADDRINUSE: address already in use 0.0.0.0:8080
    at Server.setupListenHandle [as _listen2] (node:net:1939:16)
    at listenInCluster (node:net:1996:12)
    at node:net:2205:7
    at process.processTicksAndRejections (node:internal/process/task_queues:90:21) {
  code: 'EADDRINUSE',
  errno: -98,
  syscall: 'listen',
  address: '0.0.0.0',
  port: 8080
}
[2025-05-03 16:40:51.673] [ERROR] MagicMirror² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[2025-05-03 16:40:51.673] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MagicMirrorOrg/MagicMirror/issues
[2025-05-03 16:40:51.783] [INFO]  System information:
### SYSTEM:   manufacturer: ; model: ; virtual: false
### OS:       platform: linux; distro: Debian GNU/Linux; release: 12; arch: x64; kernel: 6.8.12-8-pve
### VERSIONS: electron: undefined; used node: 22.15.0; installed node: 22.15.0; npm: 10.9.2; pm2: 5.4.3
### OTHER:    timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined

her my Config from MM:

/*************** AUTO GENERATED BY REMOTE CONTROL MODULE ***************/

{
      module: 'netatmo',
      position: 'bottom_left',
      config: {
        clientId: '123456,
        clientSecret: '1234',
        refresh_token: '1234',
        moduleOrder: [
          'Aussenmodul',
          'Regenmesser',
          'Windmesser',
          'Wohnen'
        ],
        updateInterval: 6,
        design: 'bubbles',
        horizontal: false,
        showStationName: false,
        showModuleNameOnTop: true,
        fontClassModuleName: 'small'
      }
    },

what I don’t understand either…because of the remote control module the config looks completely different than normal…but I think that has nothing to do with Netatmo…right?

I would be really grateful for your help…

Greetings

sdetweil · May 3, 2025, 2:51 PM

@kusselin the ‘already in use’ is because the container is running MagicMirror as a system service

you could use a different port for the test

export MM_PORT=8090
npm run server

now you have two instances running
one on 8080 and one on 8090

ctrl-c to stop the one on 8090

sdetweil · May 3, 2025, 2:54 PM

@kusselin config format, yes RemoteControl, like my MMM-Config rewrites the config file and doesnt see the comments

kusselin · May 3, 2025, 3:05 PM

@sdetweil said in Netatmo module will not shown:

Hello Sam,

If I enter this via putty in the path /opt/magicmirror, it will be there:

export MM_PORT=8090
npm run server

MagicMirror LXC Container
    🌐   Provided by: community-scripts ORG | GitHub: https://github.com/community-scripts/ProxmoxVE

    🖥️   OS: Debian GNU/Linux - Version: 12
    🏠   Hostname: magicmirror-live
    💡   IP Address: 192.168.200.74
root@magicmirror-live:~# cd /opt/magicmirror
root@magicmirror-live:/opt/magicmirror# export MM_PORT=8090
root@magicmirror-live:/opt/magicmirror# npm run server

> magicmirror@2.31.0 server
> node ./serveronly

[2025-05-03 17:00:10.347] [LOG]   Starting MagicMirror: v2.31.0
[2025-05-03 17:00:10.361] [LOG]   Loading config ...
[2025-05-03 17:00:10.362] [LOG]   config template file not exists, no envsubst
[2025-05-03 17:00:10.643] [INFO]  Checking config file /opt/magicmirror/config/config.js ...
[2025-05-03 17:00:10.698] [INFO]  Your configuration file doesn't contain syntax errors :)
[2025-05-03 17:00:10.698] [INFO]  Checking modules structure configuration ...
[2025-05-03 17:00:10.755] [INFO]  Your modules structure configuration doesn't contain errors :)
[2025-05-03 17:00:11.073] [LOG]   Loading module helpers ...
[2025-05-03 17:00:11.076] [LOG]   No helper found for module: alert.
[2025-05-03 17:00:11.094] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.094] [LOG]   Module helper loaded: updatenotification
[2025-05-03 17:00:11.094] [LOG]   No helper found for module: clock.
[2025-05-03 17:00:11.267] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.269] [LOG]   Module helper loaded: calendar
[2025-05-03 17:00:11.271] [LOG]   No helper found for module: compliments.
[2025-05-03 17:00:11.271] [LOG]   No helper found for module: MMM-OpenmapWeather.
[2025-05-03 17:00:11.272] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.272] [LOG]   Module helper loaded: netatmo
[2025-05-03 17:00:11.276] [WARN]  No /opt/magicmirror/modules/MMM-OpenWeatherForecast/MMM-OpenWeatherForecast.js found for module: MMM-OpenWeatherForecast.
[2025-05-03 17:00:11.276] [LOG]   No helper found for module: MMM-OpenWeatherForecast.
[2025-05-03 17:00:11.276] [LOG]   No helper found for module: MMM-Blitzer.
[2025-05-03 17:00:11.277] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.277] [LOG]   Module helper loaded: MMM-ApothekenNotdienst
[2025-05-03 17:00:11.277] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.278] [LOG]   Module helper loaded: MMM-ioBroker
[2025-05-03 17:00:11.278] [LOG]   No helper found for module: MMM-Carousel.
[2025-05-03 17:00:11.322] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.322] [LOG]   Module helper loaded: MMM-PublicTransportHafas
[2025-05-03 17:00:11.518] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.518] [LOG]   Module helper loaded: MMM-RNV
[2025-05-03 17:00:11.519] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.519] [LOG]   Check MagicMirror² version for node helper 'MMM-Fuel' - Minimum version: 2.15.0 - Current version: 2.31.0
[2025-05-03 17:00:11.519] [LOG]   Version is ok!
[2025-05-03 17:00:11.519] [LOG]   Module helper loaded: MMM-Fuel
[2025-05-03 17:00:11.595] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.596] [LOG]   Module helper loaded: MMM-Remote-Control
[2025-05-03 17:00:11.633] [LOG]   Initializing new module helper ...
[2025-05-03 17:00:11.633] [LOG]   Module helper loaded: newsfeed
[2025-05-03 17:00:11.633] [LOG]   All module helpers loaded.
[2025-05-03 17:00:11.638] [LOG]   Starting server on port 8090 ...
[2025-05-03 17:00:11.639] [WARN]  You're using a full whitelist configuration to allow for all IPs
[2025-05-03 17:00:11.649] [LOG]   Server started ...
[2025-05-03 17:00:11.650] [LOG]   Connecting socket for: updatenotification
[2025-05-03 17:00:11.650] [LOG]   Starting module helper: updatenotification
[2025-05-03 17:00:11.650] [LOG]   Connecting socket for: calendar
[2025-05-03 17:00:11.651] [LOG]   Starting node helper for: calendar
[2025-05-03 17:00:11.651] [LOG]   Connecting socket for: netatmo
[2025-05-03 17:00:11.651] [LOG]   Netatmo helper started ...
[2025-05-03 17:00:11.651] [LOG]   Connecting socket for: MMM-ApothekenNotdienst
[2025-05-03 17:00:11.652] [LOG]   Starting module helper: MMM-ApothekenNotdienst
[2025-05-03 17:00:11.652] [LOG]   Connecting socket for: MMM-ioBroker
[2025-05-03 17:00:11.652] [LOG]   Connecting socket for: MMM-PublicTransportHafas
[2025-05-03 17:00:11.652] [LOG]   Connecting socket for: MMM-RNV
[2025-05-03 17:00:11.705] [LOG]   Connecting socket for: MMM-Fuel
[2025-05-03 17:00:11.705] [LOG]   Starting module helper: MMM-Fuel
[2025-05-03 17:00:11.705] [LOG]   Connecting socket for: MMM-Remote-Control
[2025-05-03 17:00:11.706] [LOG]   Starting node helper for: MMM-Remote-Control
[2025-05-03 17:00:11.708] [LOG]   Connecting socket for: newsfeed
[2025-05-03 17:00:11.708] [LOG]   Starting node helper for: newsfeed
[2025-05-03 17:00:11.708] [LOG]   Sockets connected & modules started ...
[2025-05-03 17:00:11.709] [INFO]
>>>   Ready to go! Please point your browser to: http://0.0.0.0:8090   <<<
[2025-05-03 17:00:11.808] [INFO]  System information:
### SYSTEM:   manufacturer: ; model: ; virtual: false
### OS:       platform: linux; distro: Debian GNU/Linux; release: 12; arch: x64; kernel: 6.8.12-8-pve
### VERSIONS: electron: undefined; used node: 22.15.0; installed node: 22.15.0; npm: 10.9.2; pm2: 5.4.3
### OTHER:    timeZone: Europe/Berlin; ELECTRON_ENABLE_GPU: undefined

I have changed it like this under Putty…
then press the Ctrl key and C… but then I still have to enter IP:8080 again to display the MM…with IP:8090 it doesn’t work - network overflow

All other modules are shown correctly, but Netatmo doesent shown :-( what a f…
2 day ist gos good