Home Assistant Sensor

sdetweil

ChrisKelley

Yep sorry that makes more sense

chris@MagicMirror:~ $ ping homeassistant.local
PING homeassistant.local (10.10.28.211) 56(84) bytes of data.
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=1 ttl=64 time=2.91 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=2 ttl=64 time=3.81 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=3 ttl=64 time=4.07 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=4 ttl=64 time=3.88 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=5 ttl=64 time=1.18 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=6 ttl=64 time=3.95 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=7 ttl=64 time=4.10 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=8 ttl=64 time=1.52 ms

sdetweil

@ChrisKelley no issue, it’s useful as we know it generates the same address

sdetweil

@ChrisKelley so I installed, did npm install in the module folder
here is my config , two sensors from my entities list in HA

so now all I can think is your token string is bad…

      {
          module: 'MMM-homeassistant-sensors',
          position: 'top_left',
          classes: "page4",
          config: {
            host: "homeassistant.local",
            port: "8123",
            https: false,
            token: " my fresh token ",
            values: [
              {
                sensor: "binary_sensor.athom_garage_door_status",
              },
              {
                sensor: "sensor.foo_battery_percentage",
              },
            ]
          }
      },

ChrisKelley

@sdetweil
Sam
Thank you for all the help… I tried deleting the token. I made a new token in HA and used that one still nothing… I deleted the module from MM and I will try again this afternoon. Which fork did you use for your test? There are at least two just want to make sure I use the same one as you did…
Thanks
Chris

sdetweil

@ChrisKelley I used this one

https://github.com/Snille/MMM-homeassistant-sensors.git

ChrisKelley

@sdetweil

SAM!!!
Thank You!! It works… I was using a different fork then the one you used… plus I think my sensor strings were malformed. but all good now!

Thank You Again!

sdetweil

@ChrisKelley woohoo… great news… thanks for the feedback!!