Home Assistant Sensor

[sdetweil]

@ChrisKelley can you show the end of the error—- build lines

[ChrisKelley]

Lets see if this is better… When I hit the </> button it moves half the code hard right…

@sde/home/chris/.pm2/logs/MagicMirror-error.log last 15 lines:
0|MagicMir | [2025-12-03 15:00:35.444] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | /home/chris/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT
0|MagicMir | [2025-12-03 15:00:52.085] [WARN] You’re using a full whitelist con figuration to allow for all IPs
0|MagicMir | [2025-12-03 15:00:55.458] [ERROR] [MMM-Remote-Control] Could not fi nd main module js file for MMM-homeassistant-sensors-old
0|MagicMir | [2025-12-03 15:01:35.732] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:02:35.439] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:03:35.542] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:04:35.450] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:05:35.449] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:06:35.564] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:07:35.437] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:08:35.680] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:09:35.585] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:10:35.488] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
0|MagicMir | [2025-12-03 15:11:36.010] [ERROR] MMM-homeassistant-sensors - build Url: http://homeassistant.local:8123/api/states
tweil

[sdetweil]

@ChrisKelley did you change the config to .local??

Can you ping that from the MagicMirror system

i have grandson duty for 2 hours now
Then I will install that module

[ChrisKelley]

@sdetweil

Yep that works…

chris@MagicMirror:~ $ ping 10.10.28.134
PING 10.10.28.134 (10.10.28.134) 56(84) bytes of data.
64 bytes from 10.10.28.134: icmp_seq=1 ttl=64 time=0.027 ms
64 bytes from 10.10.28.134: icmp_seq=2 ttl=64 time=0.032 ms
64 bytes from 10.10.28.134: icmp_seq=3 ttl=64 time=0.029 ms
64 bytes from 10.10.28.134: icmp_seq=4 ttl=64 time=0.062 ms
64 bytes from 10.10.28.134: icmp_seq=5 ttl=64 time=0.036 ms
64 bytes from 10.10.28.134: icmp_seq=6 ttl=64 time=0.035 ms
64 bytes from 10.10.28.134: icmp_seq=7 ttl=64 time=0.022 ms
64 bytes from 10.10.28.134: icmp_seq=8 ttl=64 time=0.022 ms
64 bytes from 10.10.28.134: icmp_seq=9 ttl=64 time=0.025 ms
64 bytes from 10.10.28.134: icmp_seq=10 ttl=64 time=0.025 ms

code_text

[sdetweil]

@ChrisKelley ping by name?

[ChrisKelley]

Yep sorry that makes more sense

chris@MagicMirror:~ $ ping homeassistant.local
PING homeassistant.local (10.10.28.211) 56(84) bytes of data.
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=1 ttl=64 time=2.91 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=2 ttl=64 time=3.81 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=3 ttl=64 time=4.07 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=4 ttl=64 time=3.88 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=5 ttl=64 time=1.18 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=6 ttl=64 time=3.95 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=7 ttl=64 time=4.10 ms
64 bytes from 10.10.28.211 (10.10.28.211): icmp_seq=8 ttl=64 time=1.52 ms

[sdetweil]

@ChrisKelley no issue, it’s useful as we know it generates the same address

[sdetweil]

@ChrisKelley so I installed, did npm install in the module folder
here is my config , two sensors from my entities list in HA

so now all I can think is your token string is bad…

      {
          module: 'MMM-homeassistant-sensors',
          position: 'top_left',
          classes: "page4",
          config: {
            host: "homeassistant.local",
            port: "8123",
            https: false,
            token: " my fresh token ",
            values: [
              {
                sensor: "binary_sensor.athom_garage_door_status",
              },
              {
                sensor: "sensor.foo_battery_percentage",
              },
            ]
          }
      },

[ChrisKelley]

@sdetweil
Sam
Thank you for all the help… I tried deleting the token. I made a new token in HA and used that one still nothing… I deleted the module from MM and I will try again this afternoon. Which fork did you use for your test? There are at least two just want to make sure I use the same one as you did…
Thanks
Chris

[sdetweil]

@ChrisKelley I used this one

https://github.com/Snille/MMM-homeassistant-sensors.git

[ChrisKelley]

@sdetweil

SAM!!!
Thank You!! It works… I was using a different fork then the one you used… plus I think my sensor strings were malformed. but all good now!

Thank You Again!

[sdetweil]

@ChrisKelley woohoo… great news… thanks for the feedback!!