Read the statement by Michael Teeuw here.
Camera intigration in your Mirror
-
Where do you hide the IR-LEDs? In the Frame? Is there a special Module to use the Camera to disable the mirror or do you just disable all modules, if no face is recognized?
-
No, the IR-Spot is completely at another place. This spot is mounted under the room cover above the mirror.
I use the cam SW to recognize any motion in the front of the mirror named MOTION-MMAL
Take a look for example at
https://embeddedday.com/projects/raspberry-pi/a-step-further/install-motion-mmal/
In the config file you can define how the SW has to work and which commands are executed by the SW.
Se also here in this Forum
https://forum.magicmirror.builders/topic/988/motion-detection-with-raspicam-non-module-version/
-
Ok, sounds interesting. Can the Face-Recognitiontool and the MMAL-Motion share the camera? If I try to use the Camera with “raspistill” while the Face-Recog-Module is enable, I get an Error.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login