MMM-MotionEye - surveillance video stream on your mirror!

[emos]

the right one is local, correct

[Woody]

Hi Cato, thanks for this Module, I installed it and it works like a charm. One thing I like to ask you is the positioning of the module. I tried to arrange the module appearence pixel-precise with the help of the custom.ccs but was not successful. I added this to the custom.css and deleted the position definition in the config.js. Any idea what went wrong here :question: :question: :question:

.MMM-MotionEye {
 left : 700px;
 top: 1500px;
}

[Cato]

I’m really not sure since I’m not very deep into CSS. I would have to test it this weekend. By schedule is pretty tight…

I assume you have a very large screen since you’re putting Motion-Eye 1500 pixels down on it?!? :smiley:

[Woody]

Of cause, I’ve a more or less large screen but this is only one of some other positions I tried without success to prevent overlapping with other modules.
Would be great if you could help with this of cause spezific problem.
Thx in advance…

[Binog]

Hey there. My problem is, that I do not get an image one the screen, when using autohide.
It works without using autohide.
Is it true, that it appears - using autohide - if a motion is recognized?

So motioneye is recognizing correctly, but obviously it does not parse the info to the module.
this is my config:

	```{
	   module: 'MMM-MotionEye',
	   position: 'middle_center',
	    config: {
	        url: "http://motioneye:8081",
	        autoHide: true,
	        autoHideDelay:"10000",
	        debug: true,
	        animationSpeed: "2000",
	        width: "300",
    		   },
	},```

Can someone please post a screenshot of the motioneye-config (as seen above) how the settings should be set?

Thank You very much !!

[A Former User]

Hi all,
Just started my adventure with the MagicMirror, running into some problems with streaming 2 ipcams into MM.
I installed Motioneye in the Rpi and also in the MM module.

Both ipcams are visable when i log into Motioneye (in my case: 192.168.1.105:8765) but only a small icon appears in the MagicMirror.
My config is:

{                       module: 'MMM-MotionEye',
			position: 'bottom_right',
			config: {
			url: "http://192.168.1.105:8765/motioneye/1",
			debug: true,
			}

I have tried all above mentioned ideas but to no succes.
The cams are installed in Motioneye with:
http://192.168.1.102:88/cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=XXX&pwd=XXX
RTSP give me an error.
Hope someone can help me out…

[Binog]

I have that more often than I can believe. That normally means motioneye crashed,. or something. there is no connection between MM and Motioneye.
I do the login ins my http://IP:8081 an see if it is running,. normally then MM reloads the full image.

Give it a try!

BTW is there a way to let motioneye run through pm2 ?

[Binog]

Change Your port in the config.js from 8765 to 8081

[A Former User]

@Binog
Thanks, but still no succes, and would not know why it would work because i have nothing running on 8081?

MM runs on 8080 and Motioneye runs on 8765

[Binog]

Have a look in motioneye under Videostreaming -> Streaming Port. Use that one,. with me it is 8081. and the snapshot port is 8765.

Hopefully that helps.