But still, I am not using ResRobot,. and do have the same problem, from time to time,…

Have a look in motioneye under Videostreaming -> Streaming Port. Use that one,. with me it is 8081. and the snapshot port is 8765.

Hopefully that helps.

Hey, hat jemand eine Möglichkeit gefunden, ganz Deutschland mit einbinden? Finde keine all-cities-id

confirmed, confirmed, confirmed…

@bkeyport

As the new system is running, I did change the port !

Thx !

@Goldjunge_Chriz @yawns
I hace the same problem, my car isn’t much larger than the fox -still a bit, but I can’t lay flat the mirrors, nor standing, nor safely attach them. On the other hand the shipping costs - if both mirrors are packed in one package - would by just 2-3 € more expensive for each of us, than driving. With the unsafely of transportation by our one, I would prefer the shipping.

Got mine as well !! Thank You very much Chriz !!

Chriz can You please tell me, does it matter on which side the mirror is mounted? One side has a foil the other perganent-paper. Which side should I put on the monitor?
Thx

@magic21nrw

That was fast! Thank You! I appreciate Your work !

@baraka habe ich auch schon lange, bzw immer wieder…

@bkeyport

As the new system is running, I did change the port !

Thx !

Thank You, Nickthebeer and BKeyport

I’ll try in future, I finally decided to reinstall the whole system.

@mumblebaj
Thank You for reply ! None the less, there was no other instance running, I double checked it, nore was an instance under npm running. I finally decided to format the card and start over,… thx

Hey, do have a blank screen. and the logs show:

/home/pi/.pm2/logs/mm-error.log last 15 lines:
0|mm | [01.09.2021 18:00.08.684] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
0|mm | [01.09.2021 18:09.09.021] [ERROR] Whoops! There was an uncaught exception…
0|mm | [01.09.2021 18:09.09.036] [ERROR] Error: listen EADDRINUSE: address already in use 127.0.0.1:8080
0|mm | at Server.setupListenHandle [as _listen2] (net.js:1313:16)
0|mm | at listenInCluster (net.js:1361:12)
0|mm | at GetAddrInfoReqWrap.doListen [as callback] (net.js:1498:7)
0|mm | at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:68:8) {
0|mm | code: ‘EADDRINUSE’,
0|mm | errno: ‘EADDRINUSE’,
0|mm | syscall: ‘listen’,
0|mm | address: ‘127.0.0.1’,
0|mm | port: 8080
0|mm | }
0|mm | [01.09.2021 18:09.09.038] [ERROR] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
0|mm | [01.09.2021 18:09.09.039] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues

this is with a clean install of Magicmirror and the sample.config.

@spitzlbergerj
thx !!

Hey, Great Work !
Can You post a picture from the back !?
And maybe a picture from the interior (counted from the last one, a picture between 4 and 5 so how You mounted the pi, etc…)
Thx !

@rantanplan Danke

Hey, hat jemand eine Möglichkeit gefunden, ganz Deutschland mit einbinden? Finde keine all-cities-id