Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert

Binog · Feb 28, 2021, 8:28 AM

OberfragGER · Feb 28, 2021, 9:53 AM

@spitzlbergerj Great work and finish.
Where did u attach the Haljia 5 RCWL-0516) an which Modul are u using for that sensor?

spitzlbergerj · Feb 28, 2021, 10:07 AM

@OberfragGER
Thanks for the compliments!
I will put the radar sensor outside the body either on top or on the bottom. I have printed a white housing for it with the 3D printer, which I can mount accordingly. Let’s see where it responds better

cyberphox · Feb 28, 2021, 5:10 PM

That’s next level stuff right there! Great job!

spitzlbergerj · Mar 1, 2021, 2:42 PM

@cyberphox Thanks for the compliments!

spitzlbergerj · Mar 1, 2021, 2:46 PM

Hi everybody,

and here are the photos of the interior of the right door:

The screen is already fixed through the cutout of the Alu Dibond plate. With a little tape it is actually already fixed enough. For safety I have attached 4 angles, which press it additionally in. The Raspberry is mounted on a 3D printed plate. The cable routing is done via damp room cable boxes.

right door - interieur

spitzlbergerj · Mar 14, 2021, 5:54 AM

Hi all,

you could find a 3D model here

Regards
Josef

lxne · Mar 14, 2021, 10:22 AM

Awesome work!
Are the mirrors just glued onto the doors?
And did you use the chrome spy for both sides?

Best wishes,
Alex (Lower Bavaria)

spitzlbergerj · Mar 14, 2021, 12:33 PM

@lxne Thanks!
yes they are just glued
you see my method of glueing better in this post https://forum.magicmirror.builders/topic/9154/bathroom-magic-mirror
No, I don’t use chrome spy, I bought the mirrors here https://www.glas-star.de/spionspiegelnachmass/chrome-spy-spiegel/