Read the statement by Michael Teeuw here.
Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert
-
Hi,
and again I have finished a bathroom MagicMirror. This time it should be a mirror cabinet by special request, in Germany one says often “Alibert” to this kind of bathroom mirror. And so the MagicAlibert was born.The principle of my MagicMirror you can see in this post.
You can also find the sources for mirror glass and accessories there.Exterieur
Interieur
Parts, milled
Parts, Flat dowel
Parts, system 32 holes
Hinge holes
Hinges nearly closed
Hings open
Shell clamped
Shell finished
With back wall
wall mounts
Hole for cable
Body with doors
right door with cutout for screen
left door without cutout
back plane for right door
back plane for right door
doors closed
after painting
hinge
3D prints for left door - bracket glass insert - bracket cross bar
3D prints for left door - bracket glass insert - bracket cross bar
3D prints for left door - bracket glass insert - bracket cross bar
Screen built in
all technic installed
all technic installed
mounted back panel right door
Handles and bracket mounted to hold up the heavy doors
Handles and bracket mounted to hold up the heavy doors
left door open
right door open
finished - ready to moun
I have used:
- Raspberry pi 3
- Beech wood from the hardware store
- Aluminium composite panel (ACP) with cutout (https://www.plattenzuschnitt24.de/ - german: Alu Dibond Platte)
- Spy mirror (https://www.glas-star.de/spionspiegelnachmass/chrome-spy-spiegel/)
- Silicone (PCI Silcofern S) Color: black (Important! Never use transparent silicone. Otherwise you will see it and regret it!)
- Screen (HP 24w (1CA86AA) 60,45 cm (23,8 Zoll) monitor (IPS, Full HD, HDMI)
- Radar motion detector (Amazon Haljia 5 RCWL-0516)
You find a 3D model here
If you want to know more, then ask ;-)
Regards
Josef -
@spitzlbergerj really awesome!!
-
I really like the two door idea
Really neat woodwork
-
I love the Bring! App, just had to google for it :D
-
@spitzlbergerj this is by far the best bathroom mirror I have seen!! Excellent job and tutorial!
-
@sdetweil, @Zoltan, @cowboysdude Thanks for your compliments
-
@spitzlbergerj that’s is really cool, I might make one of these for home when we change our bathroom suite. What’s the toilet roll etc on the display for?
-
What’s the toilet roll etc on the display for
Hi, thats the module for the bring list app: https://github.com/rseidt/MMM-bringList
;-) -
Hey, Great Work !
Can You post a picture from the back !?
And maybe a picture from the interior (counted from the last one, a picture between 4 and 5 so how You mounted the pi, etc…)
Thx ! -
Hi @binog ,
here is a picture of the back
The wiring still has to be done. This is only the temporary solution. The cords you can see on the photo are currently used for stabilization, because the MagicAlibert is very “door-heavy”.I can only provide a picture of the mounted Raspberry Pi later, when I have removed the back of the door again.
