@magic21nrw

That was fast! Thank You! I appreciate Your work !

@baraka habe ich auch schon lange, bzw immer wieder…

@bkeyport

As the new system is running, I did change the port !

Thx !

Thank You, Nickthebeer and BKeyport

I’ll try in future, I finally decided to reinstall the whole system.

@mumblebaj
Thank You for reply ! None the less, there was no other instance running, I double checked it, nore was an instance under npm running. I finally decided to format the card and start over,… thx

Hey, do have a blank screen. and the logs show:

/home/pi/.pm2/logs/mm-error.log last 15 lines:
0|mm | [01.09.2021 18:00.08.684] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
0|mm | [01.09.2021 18:09.09.021] [ERROR] Whoops! There was an uncaught exception…
0|mm | [01.09.2021 18:09.09.036] [ERROR] Error: listen EADDRINUSE: address already in use 127.0.0.1:8080
0|mm | at Server.setupListenHandle [as _listen2] (net.js:1313:16)
0|mm | at listenInCluster (net.js:1361:12)
0|mm | at GetAddrInfoReqWrap.doListen [as callback] (net.js:1498:7)
0|mm | at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:68:8) {
0|mm | code: ‘EADDRINUSE’,
0|mm | errno: ‘EADDRINUSE’,
0|mm | syscall: ‘listen’,
0|mm | address: ‘127.0.0.1’,
0|mm | port: 8080
0|mm | }
0|mm | [01.09.2021 18:09.09.038] [ERROR] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
0|mm | [01.09.2021 18:09.09.039] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues

this is with a clean install of Magicmirror and the sample.config.

@spitzlbergerj
thx !!

Hey, Great Work !
Can You post a picture from the back !?
And maybe a picture from the interior (counted from the last one, a picture between 4 and 5 so how You mounted the pi, etc…)
Thx !

@rantanplan Danke

Hey, hat jemand eine Möglichkeit gefunden, ganz Deutschland mit einbinden? Finde keine all-cities-id ;-)

Hey, nice work ! Is it possible to merly see the value instead of Time-stamp and City?? a la “red - Incidense-value - red”

Do have the same problem after upgrade to 2.10.0.

Any hints?

Hey, SdeGeata
No, actually I didn’t

I circumvented it by setting up a motioneyeos raspberry pi zero. As I needed the larger image on my Magicmirror I used “fast…?” option, which does not provide any of the motion activities,. what was fine to me.
I do think, this is not merely a problem of motioneye, but of the MM its self.
With every update of MM the Gap went bigger, I got more problems.
Now, streaming the motioneyeos to two MMs it is more steady, nonetheless I do habe outages. I don’t see a picture,. although my browser directed to motioneyeos shows an actual one. Restarting MM solves that issue- normally,…
Good look to You !

I do get this:

[Error] Refused to execute http://ip:8080/modules/iFrameReload//iFrameReload.js as script because "X-Content-Type: nosniff" was given and its Content-Type is not a script MIME type.

Error on loading script: – "modules/iFrameReload//iFrameReload.js"
onerror — loader.js:190

Refused to display 'https://www.google.com/maps/' in a frame because it set 'X-Frame-Options' to 'SAMEORIGIN'.

What can I do about this?

Thank You Mykle1
changing these font sizes does not seem to change anything,… going to try more in a couple of days,…

Thanks @Mykle1

I thought of,… But I get this:
what should I do?

Hey,. a little to related to the topic…
Is it possible to enlarge the font?
Is there a way with the css?

Thx
Jimmy

Hey there,
Where to I find the airvisual aqi-Key for the MMM-NOAA3 profile?
Have Registered, but can’t find it…

please help me!

@blebbens said in Upgrading to MM 2.6.0:

Did you run it in your MagicMirror directory ?

yep. do have the same problem.
it may be permission related, how to reset permissions to default in MagicMirror directory?

sorry, im Original nicht vorhanden. beim auslöschen einer Zeile drin geblieben.