Read the statement by Michael Teeuw here.
Raspberry Pi Config Help - Unable to find - [SeatDefaults] To add the following line below xserver-command=X -s 0 -dpms
-
Hi so I’m slowly getting into configuring my Raspberry Pi.
I’m running Raspbian Stretch with desktop
Image with desktop based on Debian Stretch
Version: September 2017
Release date: 2017-09-07
Kernel version: 4.9
Release notes: LinkI’m following the details on this page https://github.com/MichMich/MagicMirror/wiki/Configuring-the-Raspberry-Pi
I’m at the section for the screensaver and I’m at the step below.
Add the following line below [SeatDefaults]
xserver-command=X -s 0 -dpmsBut I’ve typed everything in correctly but I’m unable to find the line [SeatDefaults]
at the top of the open screen reads
GNU nano 2.7.4 File: /etc/lightdm/lightdm.confAny help would be greatly appreciated.
-
@IDCreate I never got the screensaver to disable properly with the configs as you have tried. I instead installed XScreensaver and then used that to disable screensaver and energy savings screen blanking.
-
This post is deleted! -
Thanks very much j.e.f.f that’s very helpful advice. I’m pleased I’m not the only one that has had this issue. I couldn’t even find the code line [SeatDefaults] on the page /etc/lightdm/lightdm.conf . I’ll try your suggestion, Mykle1 had also suggested this option to me but I just wanted to dig a little deeper and find out why [SeatDefaults] was not in the script for GNU nano 2.7.4 File: /etc/lightdm/lightdm.conf
I’m sure there’s probably a obvious explanation for it.
So how do I install on my Raspberry Pi 3 and is it suitable.I’m running Raspbian Stretch with desktop
Image with desktop based on Debian Stretch
Version: September 2017
Release date: 2017-09-07
Kernel version: 4.9
Release notes: Link -
check file by:
sudo nano ~/.config/lxsession/LXDE-pi/autostartif it includes:
@xscreensaver -no-splashthen just comment it by adding #
#@xscreensaver -no-splashif it doesn’t work install xscreensaver:
sudo apt-get install xscreensaver
