Fitbit

kckndrgn

Lots of good info to try out. I failed at getting this working this morning before leaving for work.

I do have a question. The directions say MM has to be started with sudo, i’m starting it by running ‘pm2 start mm’ per the MM install setup. How do I run this as root?

Thanks

kckndrgn

OK, So I’m working on this and being new to MM, NodeJS, GIT, etc. is not helping :) (I am a programmer, so at least I have that going for me).
Something that I don’t think was too clear, at least it wasn’t for me. When running setupAccess.py, it’s starting a web service, the direction say to log into your fitbit account and authorize your app, what I had to do, on my Pi, was to go to 127.0.0.1:8080. This initiated the redirect to Fitbit, when I logged in I had the check boxes to enable/disable items and the allow/deny buttons.
When I clicked on the “allow” then the terminal with setupAccess running showed that the tokens were getting written out, and indeed the tokens.ini file was finally created.

kckndrgn

I’m having a problem with my fitbit module. (mods if this should be a new thread just let me know).
I can start the MM and the FB data loads, then after a time my ‘credentials.ini’ file gets changed to “undefined” for both entries

[Credentials]
c_id = undefined
c_secret = undefined

Now, when I ran setupAccess.py the file was correct and my tokens file was created. What I’m seeing happen is that after a while the FB module stops refreshing. I’m guessing it’s because the tokens need to be refreshed and because my credentials are gone, it can’t authorize.

Any thoughts?
I’m not sure how to get any logs or info out of the system. I’m running MM through pm2 and I don’t see any log files.

TIA

kckndrgn

Solved my issues.

Saw the following when starting up MM

results: [{"message":"Writing credentials to credentials.ini","type":"status"},{"message":"Writing id: undefined and secret: undefined","type":"status"},{"message":"Credentials write successful","type":"status"}]
Create new todo fetcher for list: Groceries - Interval: 60000
Create new todo fetcher for list: Family - Interval: 60000
Whoops! There was an uncaught exception...
{ Error: process exited with code 1
    at terminateIfNeeded (/home/pi/MagicMirror/modules/node_modules/python-shell/index.js:100:23)
    at ChildProcess.<anonymous> (/home/pi/MagicMirror/modules/node_modules/python-shell/index.js:88:9)
    at emitTwo (events.js:106:13)
    at ChildProcess.emit (events.js:191:7)
    at Process.ChildProcess._handle.onexit (internal/child_process.js:204:12)
  executable: 'python',
  options: null,
  script: 'modules/MMM-fitbit/python/getData.py',
  args: null,
  exitCode: 1 }
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues

Tracing the information back, it was in the config.js file. I had an extra set of [] around the credentials data. Not sure how or why I had it that way, but all cleared up now.

olliewarren411

Hi Guys,

Firstly thank you for creating this module it’s exactly what I wanted!

I’m having an issue with the module running for extended periods of time where it loses connection to fitbit and I need to run “sudo python setupAccess.py” on the python directory again to get it to pull my latest stats from Fitbit.

Do you have any way it can check in with Fitbit every 30 mins or every hour to reconnect and pull the latest stats?

Many thanks
Ollie

Hellangel1987

Hi Guys,

this Module is freaking me out… (123456789 are just examples for my API ID)
I just entered this Code in my config.js

{
	module: 'MMM-fitbit',
	position: 'top_center',
	config: [
		credentials: {
			client_id: 123456789,
			client_secret: 123456789,
		},
		resources: [
			'steps',
			'floors',
			'caloriesOut',
			'distance',
			'activeMinutes',
			'sleep',
			'heart'
		]
	]
},

if i try to start magicmirror it doesnt load because he says there is no valid config.
I opened an issue in github for that and Venditteli says there are some issues with the file ownership of any ini file. Any hint or any workaround is very pleased wellcome.

Thank you guys.

Regards

Hellangel

Note from admin: Please use Markdown on code snippets for easier reading!

olliewarren411

Hi Hellangle1978,

Try the below I saw a few errors in the example code;

{
	module: ‘MMM-fitbit’,
	position: ‘top_center’,
	config: {
		credentials: {
			client_id: '123456789',
			client_secret: '123456789',
			},
		resources: [
			‘steps’,
			‘floors’,
			‘caloriesOut’,
			‘distance’,
			‘activeMinutes’,
			‘sleep’,
			‘heart’
			]
		}
},

Note from admin: Please use Markdown on code snippets for easier reading!

Hellangel1987

Hi @olliewarren411

i used your code - not working.

I created as followed in instructions an token.ini worked all out no problem.
Just wen pasting the code in my config.js then after that the mirror will not start. Even if i use sudo npm start on desktop.
Mirror is aways asking for an config or an error in my config after pasting that in config :(

olliewarren411

@Hellangel1987 Can you post the config code you’re using please?

Hellangel1987

Im using your code as provided

olliewarren411

@Hellangel1987
Yes If possible please paste your entire config file as the error might be elsewhere

Hellangel1987

@olliewarren411

here we go

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 */

var config = {
	port: 8080,

	language: 'de',
	timeFormat: 24,
	units: 'metric',

	modules: [
    		{
        		module: 'MMM-FRITZ-Box-Callmonitor',
        		position: 'top_right',  // This can be any of the regions. Best results in left or right regions.
        		header: "Letzte Anrufe", // This is optional
        		config: {
            		// See 'Configuration options' for more information.
        	}
    		},
			{
				module: ‘MMM-fitbit’,
				position: ‘top_center’,
				config: {
				credentials: {
				client_id: ‘123456789’,
				client_secret: ‘123456789’,
			},
				resources: [
				‘steps’,
				‘floors’,
				‘caloriesOut’,
				‘distance’,
				‘activeMinutes’,
				‘sleep’,
				‘heart’
			]
			}
			},			
		{
			module: 'alert',
		},
		{
			module: 'clock',
			position: 'top_left'
		},
		{
			module: 'calendar',
			header: 'Feiertage',
			position: 'top_left',
			config: {
				calendars: [
		{
						symbol: 'calendar-check-o ',
						url: 'webcal://www.schulferien.org/media/ical/deutschland/ferien_bayern_2016.ics'
		}
				]
		}
		},
		{
			module: 'calendar',
			header: 'Termine NetApp',
			position: 'top_left',
			config: {
				calendars: [
		{
						symbol: 'calendar-check-o ',
						url: '################################'
		}
					   ]
		}
		},
		{
  			module: 'localtransport',
			header: 'Verbindungen NBG HBF',
  			position: 'top_left',
  			config: {
    			api_key: '###########',
    			origin: 'Nuremberg Dunantstr',
    			destination: 'Nuremberg HBF'
  		}
		},
		{
    			module: 'MMM-Traffic',
    			header: 'Verkehr',
			position: 'top_left',
    			classes: 'dimmed medium', //optional, default is 'bright medium', only applies to commute info not route_name
    			config: {
        		api_key: '#############',
        		mode: 'driving',
        		origin: 'Nuernberg',
        		destination: 'Muenchen',
             		route_name: 'Route nach NetApp Muc',
			show_summary: true,
        		changeColor: true,
        		showGreen: true,
        		limitYellow: 5, //Greater than 5% of journey time due to traffic
        		limitRed: 20, //Greater than 20% of journey time due to traffic
        		traffic_model: 'best_guess',
        		interval: 120000 //2 minutes
    		}
		},
		{
			module: 'compliments',
			position: 'lower_third'
		},
		{
			module: 'currentweather',
			position: 'top_right',
			config: {
				location: 'Nuremberg',
				locationID: '',  //ID from http://www.openweathermap.org
				appid: '#################'
		}
		},
		{
			module: 'weatherforecast',
			position: 'top_right',
			header: 'Wettervorhersage',
			config: {
	            		location: 'Nuremberg',
				locationID: '2861650',  //ID from http://www.openweathermap.org
	            		appid: '##############'
		}
		},
		{
    			module: 'MMM-MovieInfo',
    			position: 'top_right',
    			config: {
        		api_key: '#############'
    		}
		},
    		{
        		module: 'email',
            		position: 'bottom_bar',
            		header: 'Emails',
            		config:{
                	user: '##############',
                	password: '#############',
                	host: 'imap.mail.me.com',
                	port: 993,
                	tls: true,
                	authTimeout: 10000,
                	numberOfEmails: 5,
                	fade: true
        	}
    		},
		{
			module: 'newsfeed',
			position: 'bottom_bar',
			config: {
				feeds: [
		{
						title: "Focus Eilmeldungen",
						url: "http://rss.focus.de/fol/XML/rss_folnews_eilmeldungen.xml"
		}
				],
				showSourceTitle: true,
				showPublishDate: true
		}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== 'undefined') {module.exports = config;}

Note from admin: Please use Markdown on code snippets for easier reading!

olliewarren411

@Hellangel1987

Looks like you’re using the wrong quote marks around elements, you’re using ‘ try using ’

There is a difference.

or use the code below; I’ve tested it working.

@Hellangel1987

Looks like you’re using the wrong quote marks around elements, you’re using ‘ try using ’

There is a difference.

or use the code attached; I’ve tested it working.

0_1471976763018_config.txt

plumcraft

Thanks for publishing this module but i got some issues with it.

When i’m running sudo python setupAccess.py and put my client and secret it, the script looks frozen. (Same behaviour after multiple retries)

Anyone having the same issue ?

I don’t know why, i’ve followed instructions here :
https://github.com/SVendittelli/MMM-fitbit

Hellangel1987

@olliewarren411

good job buddy now it works but i dont get any numbers :(

olliewarren411

@Hellangel1987
No Problem.

When you run #sudo python setupAccess.py# on the python directory inside the MMM-fitbit folder does it redirect you to log into you fitbit account in an internet browser?

Also what fitbit model are you using? I tried this with a fitbit alta and it didn’t work. Then I tried with my fitbit ChargeHR and it works perfect* see attached. I changed the CSS to display vertically.

*i say it works perfect i just need a way to keep the connection to my fitbit account over a long period of time without having to re-run sudo python setupAccess.py on the python directory once a day.

Hellangel1987

@olliewarren411

Im using The Fitbit Charge HR

olliewarren411

@Hellangel1987
When you run #sudo python setupAccess.py# on the python directory inside the MMM-fitbit folder does it redirect you to log into you fitbit account in an internet browser?

Hellangel1987

@olliewarren411

yepp works perfect. i have the token and autorized that app in browser.
after that i startet mirror with sudo npm start. but only zero numbers are shown :(

Did i have to do this once a day? Any cronjob for that ?

olliewarren411

@Hellangel1987

Sorry I’m out of ideas then.

Cronjob? I’m pretty new to this.