MMM-AssistantMk2

[jomwells]

Thank you, I will look into piping the audio, but its unlikely I will get very far :)

Question: is it possible to run terminal commands at the different stages of MMM-AssistantMk2, such as running a command to turn on a GPIO pin (using the built in ‘GPIO write X 1’ ) when the module begins listening, and turning it off again when it is understanding, or speaking perhaps? the use case for which would be a status LED on the mirror. Thanks again.

[A Former User]

@jomwells
You can fork my repository to yours and modify it.
When you want to relay status to other modules, add .sendNotification() in ’socketNotificationReceived()’ of AssistantMk2.js where proper event is located.
When you want to do something directly, add your job in ’Conversation.on(EVENT)’ of node_helper.js.

[Sun]

1. What else do I need to do for install for mmm-assistantmk2 to play youtube.

2. I try the same command say Celine Dion The power of love. Then pop up below detail about Celine Dion and the youtube video automatically pop up but cannot play anything.

3. My magic mirror is vertical mode, rotate = 1 . I try to adjust from your height 480 width 854 of display but it also show in vertical mode height 480 with 640 also height 640 width 480. No different.

[A Former User]

@sun

• Some youtube videos are not allowed for embedded player.
• some videos are not caught, it will be fixed.
• some videos are not only video but playlist, so it is not caught, but it will be fixed also.
• sometime Google gives no information about youtube. I guess smart tv is using not only YouTube but also other dedicated apps for music and video, yogether

[JRCelis]

@jomwells

I get the same issue, I hear a buzz at the beginning of the answered sentences in my speaker and clear voice after two seconds of the sentences start.

[A Former User]

@jrcelis
What kind of speaker do you use? Analog? HDMI output? USB? Bluetooth?
Except for Bluetooth speaker, All others could have buzz sound.

[JRCelis]

@sean
Hello @Sean and thanks for your help. I’m using the speaker that is coming with Google Voice Kit V1 and is working fine when I’m testing the sound, no buzz or distorted sound and the beginning of the sentences, the issue starts when I click the speaker icon when MMM-assistantk2 is running, the assistants answer start whit a big distorted noise o buzz and then will be fine.

[A Former User]

@jrcelis
Unfortunately, I’m not an expert in sound configuration.
I use node module speaker for output. The buffered voice output from Google Assistant Server is directly piped to speaker module. And there is narrowly little margin to control speaker module.

My guess is, burden of system could make some delay causing distortion. but just guessing.

Anyway, I’m considering to convert voice output to mp3 file then play it. but it needs somewhat computing power, so I’m not sure whether it will be really good for RPI.
Or I will search other solution for better result.

[mariecbilodeau]

Hello! I got Hotword working but assistant triggers error. I tried to rebuild electron as explained in the installation guide but it’s not working. I have the google voice kit installed on my raspberry… do you think that is the problem?

[A Former User]

@mariecbilodeau more details are needed to answer. Error logs or screenshots could be helpful.