Read the statement by Michael Teeuw here.
Blank white display on local machine (pi)
-
You shouldn’t need to launch a browser to view MM. If you followed the extensive installation steps, it should come up by itself. If you are still having problems after that, let us know where it failed during the setup.
-
Wow haven’t come across these instructions yet. Seem quite detailed. I will give it a try as soon as possible and will let you know if it worked.
Thanks for the quick reply :) -
Just a note: that was written for an RPI 3, and you’re using an RPI 2. Some things might be different but overall it should work just the same.
-
Alright, initially I wanted to setup the MM next to Jasper [1] for TTS and STT, but then again I cannot find any use-case for that when the mirror already displays everything relevant by itself XD… Therefore, I decided to kill the whole Jasper stuff and made a clean install. With this it worked like a charm now. Should have taken a look at the modules in advance. I was not a ware of such an active community. Awesome stuff, thx a lot!
@KirAsh4: Your instructions work perfectly for the RPi2 as well ;)
-
there are already built tts and stt modules for magicmirror²
