MMM-DarkSkyForecast - Yet ANOTHER weather module

humdinger44

Hey guys,
I too am trying to solve the “Loading…” problem. I’ve tried a number of things but the most telling clue I have is that dark sky doesn’t register any api use for my key. I’ve tried resetting the key, no difference. No errors show up in the dev tool. Does anyone see any problems with my config?

{
   	module: "MMM-DarkSkyForecast",
  	header: "Weather",
	classes: "default everyone",
  	disabled: false,
  	position: "top_right",
  		config:
			{
    			apikey: "**************",
    			latitude: "**.******",
    			longitude: "-**.******",
    			iconset: "2m",
    			forecastLayout: "table"
    			}
		},

motdog

@humdinger44 longitude should have - you have _ that could be it

humdinger44

@motdog Thanks, I double checked that but it is the negative sign “-”

sdetweil

the ‘loading’ problem is typical of a module that displays a default message (‘Loading…’)
which is replaced when the data arrives. So, the data did not arrive…

can u open the developers window and select the console tab and put DarkSky in the filter box. to remove any other messages…

there should be some message about the api usage, key, … something

sdetweil

I changed my key so it was invalid, and see an error in the terminal window

[MMM-DarkSkyForecast] 15-May-19 09:11 ** ERROR ** null

humdinger44

@sdetweil https://imgur.com/d2Xeqgs.jpg I dont see anything like that
https://i.imgur.com/d2Xeqgs.jpg shows the errors tab. i dont believe any of them apply to darksky

sdetweil

@humdinger44 note, this is in the terminal window where u issue npm start…

Or it should appear in the pm2 logs

humdinger44

@sdetweil
this?
https://i.imgur.com/SZZOQHm.png?1
note that my internet connection up and running

sdetweil

@humdinger44 that says u are trying to run two copies on the same port. No can do do u have 2 entries for pm2 startup?

humdinger44

@sdetweil it’s only like that because of how I started the dev tool while the mirror was already running