MMM-AssistantMK2 USB Mic

[tigroufou]

Hi, thanks to be cool with me.
I’m French and my English isn’t very good :-)
I have install and configure MagicMirror with MMM-AssistantMK2.
But the USB microphone and USB audio doesn’t work.
I don’t understand where is the problem ?

This is arecord List

pi@raspberrypi:~ $ arecord -L
null
    Discard all samples (playback) or generate zero samples (capture)
default
sysdefault:CARD=Device
    USB PnP Sound Device, USB Audio
    Default Audio Device
front:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Front speakers
surround21:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Direct sample mixing device
dsnoop:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Direct sample snooping device
hw:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Direct hardware device without any conversions
plughw:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Hardware device with all software conversions

And this is .asoundrc configuration file

pcm.!default{
  type hw
  playback.pcm{
    type hw
    card 1
  }
  capture.pcm{
    type plug
    slave.pcm "hw:1, 0"
  }
}

ctl.!default{
  type hw
  card 1
}

pcm.!default {
	type hw
	card 1
}

ctl.!default {
	type hw
	card 1
}

Even if i configure by Default USB Soundcard (USB Pnb sound Device) in “Preferences/Audio Device Setting”, it doesn’t work too.

Have you any solution for me ?

Thanks

[bhepler]

Please use the markdown features of the board when posting code.

[tigroufou]

Hello,

I have modified with markdown features.

[solomon-il]

I went through this tutorial and managed to use USB Mic:

link text