Problem when installing MagicMirror on Raspbian Buster RPB3+

[sdetweil]

@thomaslc while I test the installer, u could use the pm2 only script

see instructions here , fix already added

https://forum.magicmirror.builders/topic/10907/new-script-to-install-fix-pm2-config-for-start-on-boot

installer also tested and restarts on boot… have to delete the MagicMirror folder again if u go this way

[thomaslc]

It’s not working :(

https://ibb.co/4s4GNC2

I can send you the log if you want :)

[sdetweil]

@thomaslc sure… and the output of

pm2 logs --lines=100

my email is the same userid as here on gmail…

and there is some startup problem… cause pm2 thinks the mirror is running,
and then u do npm start AGAIN… but you should get output some output…

[bobwilliams]

@sdetweil Yesterday I installed pi 3 B + on the raspberry, it was installed without problems.

[sdetweil]

@bobwilliams thanks… your original problem was with update, which is where i see a problem i need to correct

[bobwilliams]

@sdetweil on pi zero also decided … so everything is in order …

[sdetweil]

@bobwilliams yes, install is good… update still has a problem…

[bobwilliams]

@sdetweil thank you for your hard work