Read the statement by Michael Teeuw here.
Rpi 4 and two monitors
-
@NathTheDude said in Rpi 4 and two monitors:
When I update ‘Display’ to 1 I still get an error
Yes, we just need to find out what the other Display number is.
tvservice is wrong cause it reports display 2 for HDMI 0, and we know it’s really Display 0
-
@sdetweil , so using ‘0’ or ‘0.0’ give the same result and start MM on the first monitor.
So far I have tried 1,2,3,4,5,6,7,8,9 and 0.1, 0.2, 0.3, 0.4, 0.5
How far do I go? :)
-
@NathTheDude The 2nd monitor should be display 0, screen 1. Use this:
DISPLAY=:0.1 -
Hey @OldSunGuy , thanks. ‘0’ and ‘0.0’ seem to be the first monitor however I get an error when I try anything else. So far I have tried using each of the following: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9
Each time I try to start npm (npm start) apart from when I use 0 or 0.0 I get the following (with the value reflecting the number I changed in ‘run-start.sh’):
(electron:2238): Gtk-WARNING **: 06:14:02.236: cannot open display: :0.1@sdetweil - not sure if this is relevant but it does not seem to matter what value I set in ‘run-start.sh’, when I reboot the pi it will always start MM on the first screen. Should it not fail if it is using ‘run-start.sh’?
Also with an incorrect value being added to ‘run-start.sh’, when I run ‘mm.sh’ this always works and displays MM on the first screen.
okay, I think I understand it now. When I reboot it is using ‘mm.sh’, within mm.sh is the following:
cd ~/MagicMirror DISPLAY=:0 npm startWhich I assume means that the ‘run-start.sh’ is not used during boot up?
When I change this value to anything other than 0, this will also fail with the same error seen when trying to run npm previously.
-
@NathTheDude If you start a terminal on one desktop and run:
echo $DISPLAYThen start a terminal on the other desktop and run:
echo $DISPLAYdo you get the same results?
-
@OldSunGuy - I get :0.0
I wonder if both screens are being seen as 0.0, if that is the case I guess I would expect the MM screen to cover both screens and not just the first :-/
-
@OldSunGuy , sorry mis read your comment. Not sure how I would start a terminal on one screen and a different terminal on another.
-
@NathTheDude if they are two independent desktops, then you should have a menu on the second desktop, just like the first…
also, you can move the mouse to the second desktop and do ctrl-alt-t to open a terminal there
I have an micro hdmi adapter coming later today so I can put up a second physical display on my pi4…
-
@sdetweil , I opened up a terminal session on each screen and both indicated the same display was being used (:0).
From the ‘Appearance Settings’ window (‘Prefences’ > ‘Apprearance Settings’, there is a ‘Taskbar’ tab and in this tab you select which hdmi output you want the taskbar to be on. You can choose both.
-
@NathTheDude so, it looks like one big desktop…
u should be using Buster OS, right? so you can see the temples across the big image, some on the right display, some on the left…
NOT the same on both?
