A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
MM on Pi Zero fails after being off for a few days
-
I’ve had my MM running well for months, but I had to shut it down recently to move it and when I plugged everything in again afterwards it doesn’t load on the Pi’s screen. It does however load fine if i remotely connect to the url for my MM on another computer.
i assumed it might be a problem with Chromium so I removed and re-installed that, but it made no difference.
Next I tried re-installing again on top of my current installation (from here http://emmanuelcontreras.com/how-to/how-to-create-a-magic-mirror-2-with-pi-zero-w/) but have had no luck.
The description of the problem is that the Pi boots to terminal then screen goes black and I see a mouse cursor, then it drops back to the terminal and just loops between the two every 30s or so.
Is there a way to diagnose what’s going on as I really don’t want to start from scratch again.
Cheers
-
@kellogg76 we can debug it. Later as I am not near my machine
-
@sdetweil Thanks, i’ll check back later, I’m in Eastern Canada so if the time difference is a problem leave some instructions and I’ll reply with the outcomes.
-
It does however load fine if i remotely connect to the url for my MM on another computer.
sounds like its trying to start a second time, and failing… (cause the 1st time is running , maybe in serveronly mode?_
use ssh into the pi, and use whatever mechanism to stop mirror app…
pm2, whatever autostart process…IF you reinstall, I suggest you use my install script…
see here
https://github.com/sdetweil/MagicMirror_scriptsdoes all the work.
what starts this? pm2? pm2 logs --lines=100 will show the logs
-
@sdetweil said in MM on Pi Zero fails after being off for a few days:
pm2 logs --lines=100
Here’s the last 100 lines of the pm2 log, with a few of the first PM2 lines removed as they were identical :-
[TAILING] Tailing last 100 lines for [all] processes (change the value with --lines option) /home/pi/.pm2/pm2.log last 100 lines: PM2 | 2020-03-29T09:27:24: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:27:58: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:27:58: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:27:58: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:28:32: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:28:32: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:28:32: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:29:05: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:29:05: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:29:05: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:29:42: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:29:42: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:29:42: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:30:16: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:30:16: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:30:16: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:30:49: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:30:49: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:30:49: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:31:23: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:31:23: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:31:23: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:31:57: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:31:57: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:31:57: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:32:31: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:32:31: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:32:31: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:33:04: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:33:04: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:33:04: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:33:38: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:33:38: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:33:38: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:34:12: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:34:12: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:34:12: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:34:48: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:34:48: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:34:48: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:35:24: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:35:24: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:35:24: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:35:58: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:35:58: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:35:58: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:36:32: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:36:32: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:36:32: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:37:06: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:37:06: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:37:06: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:44:58: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:44:58: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:44:58: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:45:35: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:45:35: PM2 log: App [mmstart:0] starting in -fork mode- PM2 | 2020-03-29T09:45:35: PM2 log: App [mmstart:0] online PM2 | 2020-03-29T09:46:01: PM2 log: Stopping app:mmstart id:0 PM2 | 2020-03-29T09:46:02: PM2 log: App [mmstart:0] exited with code [0] via signal [SIGINT] PM2 | 2020-03-29T09:46:02: PM2 log: pid=27183 msg=process killed /home/pi/.pm2/logs/mmstart-error.log last 100 lines: 0|mmstart | at Function.Module.runMain (internal/modules/cjs/loader.js:832:11) 0|mmstart | at startup (internal/bootstrap/node.js:283:19) 0|mmstart | at bootstrapNodeJSCore (internal/bootstrap/node.js:622:3) 0|mmstart | code: 'EADDRINUSE', 0|mmstart | errno: 'EADDRINUSE', 0|mmstart | syscall: 'listen', 0|mmstart | address: '0.0.0.0', 0|mmstart | port: 8080 } 0|mmstart | 0|mmstart | 0|mmstart | X.Org X Server 1.20.4 0|mmstart | X Protocol Version 11, Revision 0 0|mmstart | Build Operating System: Linux 4.15.0-48-generic armv8l Raspbian 0|mmstart | Current Operating System: Linux KitchenPi 4.19.75+ #1270 Tue Sep 24 18:38:54 BST 2019 armv6l 0|mmstart | Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:FF:A6:3B vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 conso$ 0|mmstart | Build Date: 05 June 2019 12:49:54PM 0|mmstart | xorg-server 2:1.20.4-1+rpt1 (https://www.debian.org/support) 0|mmstart | Current version of pixman: 0.36.0 0|mmstart | Before reporting problems, check http://wiki.x.org 0|mmstart | to make sure that you have the latest version. 0|mmstart | Markers: (--) probed, (**) from config file, (==) default setting, 0|mmstart | (++) from command line, (!!) notice, (II) informational, 0|mmstart | (WW) warning, (EE) error, (NI) not implemented, (??) unknown. 0|mmstart | (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 29 09:44:21 2020 0|mmstart | (==) Using system config directory "/usr/share/X11/xorg.conf.d" 0|mmstart | /home/pi/chromium_start.sh: 7: /home/pi/chromium_start.sh: chromium-browser: not found 0|mmstart | xinit: connection to X server lost 0|mmstart | 0|mmstart | waiting for X server to shut down (II) Server terminated successfully (0). Closing log file. 0|mmstart | 0|mmstart | [09:44:38.366] [ERROR] { Error: listen EADDRINUSE: address already in use 0.0.0.0:8080 0|mmstart | at Server.setupListenHandle [as _listen2] (net.js:1279:14) 0|mmstart | at listenInCluster (net.js:1327:12) 0|mmstart | at doListen (net.js:1460:7) 0|mmstart | at process._tickCallback (internal/process/next_tick.js:63:19) 0|mmstart | at Function.Module.runMain (internal/modules/cjs/loader.js:832:11) 0|mmstart | at startup (internal/bootstrap/node.js:283:19) 0|mmstart | at bootstrapNodeJSCore (internal/bootstrap/node.js:622:3) 0|mmstart | code: 'EADDRINUSE', 0|mmstart | errno: 'EADDRINUSE', 0|mmstart | syscall: 'listen', 0|mmstart | address: '0.0.0.0', 0|mmstart | port: 8080 } 0|mmstart | 0|mmstart | 0|mmstart | X.Org X Server 1.20.4 0|mmstart | X Protocol Version 11, Revision 0 0|mmstart | Build Operating System: Linux 4.15.0-48-generic armv8l Raspbian 0|mmstart | Current Operating System: Linux KitchenPi 4.19.75+ #1270 Tue Sep 24 18:38:54 BST 2019 armv6l 0|mmstart | Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:FF:A6:3B v$ 0|mmstart | Build Date: 05 June 2019 12:49:54PM 0|mmstart | xorg-server 2:1.20.4-1+rpt1 (https://www.debian.org/support) 0|mmstart | Current version of pixman: 0.36.0 0|mmstart | Before reporting problems, check http://wiki.x.org 0|mmstart | to make sure that you have the latest version. 0|mmstart | Markers: (--) probed, (**) from config file, (==) default setting, 0|mmstart | (++) from command line, (!!) notice, (II) informational, 0|mmstart | (WW) warning, (EE) error, (NI) not implemented, (??) unknown. 0|mmstart | (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 29 09:44:55 2020 0|mmstart | (==) Using system config directory "/usr/share/X11/xorg.conf.d" 0|mmstart | /home/pi/chromium_start.sh: 7: /home/pi/chromium_start.sh: chromium-browser: not found 0|mmstart | xinit: connection to X server lost 0|mmstart | 0|mmstart | waiting for X server to shut down (II) Server terminated successfully (0). Closing log file. 0|mmstart | 0|mmstart | [09:45:20.571] [ERROR] { Error: listen EADDRINUSE: address already in use 0.0.0.0:8080 0|mmstart | at Server.setupListenHandle [as _listen2] (net.js:1279:14) 0|mmstart | at listenInCluster (net.js:1327:12) 0|mmstart | at doListen (net.js:1460:7) 0|mmstart | at process._tickCallback (internal/process/next_tick.js:63:19) 0|mmstart | at Function.Module.runMain (internal/modules/cjs/loader.js:832:11) 0|mmstart | at startup (internal/bootstrap/node.js:283:19) 0|mmstart | at bootstrapNodeJSCore (internal/bootstrap/node.js:622:3) 0|mmstart | code: 'EADDRINUSE', 0|mmstart | errno: 'EADDRINUSE', 0|mmstart | syscall: 'listen', 0|mmstart | address: '0.0.0.0', 0|mmstart | port: 8080 } 0|mmstart | 0|mmstart | 0|mmstart | X.Org X Server 1.20.4 0|mmstart | X Protocol Version 11, Revision 0 0|mmstart | Build Operating System: Linux 4.15.0-48-generic armv8l Raspbian 0|mmstart | Current Operating System: Linux KitchenPi 4.19.75+ #1270 Tue Sep 24 18:38:54 BST 2019 armv6l 0|mmstart | Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:FF:A6:3B v$ 0|mmstart | Build Date: 05 June 2019 12:49:54PM 0|mmstart | xorg-server 2:1.20.4-1+rpt1 (https://www.debian.org/support) 0|mmstart | Current version of pixman: 0.36.0 0|mmstart | Before reporting problems, check http://wiki.x.org 0|mmstart | to make sure that you have the latest version. 0|mmstart | Markers: (--) probed, (**) from config file, (==) default setting, 0|mmstart | (++) from command line, (!!) notice, (II) informational, 0|mmstart | (WW) warning, (EE) error, (NI) not implemented, (??) unknown. 0|mmstart | (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 29 09:45:29 2020 0|mmstart | (==) Using system config directory "/usr/share/X11/xorg.conf.d" 0|mmstart | /home/pi/chromium_start.sh: 7: /home/pi/chromium_start.sh: chromium-browser: not found 0|mmstart | xinit: connection to X server lost 0|mmstart | 0|mmstart | waiting for X server to shut down (II) Server terminated successfully (0). Closing log file. 0|mmstart | /home/pi/.pm2/logs/mmstart-out.log last 100 lines: 0|mmstart | [09:44:04.467] [LOG] Initializing new module helper ... 0|mmstart | [09:44:04.475] [LOG] Module helper loaded: calendar 0|mmstart | [09:44:04.956] [LOG] Initializing new module helper ... 0|mmstart | [09:44:04.964] [LOG] Module helper loaded: newsfeed 0|mmstart | [09:44:04.970] [LOG] All module helpers loaded. 0|mmstart | [09:44:04.975] [LOG] Starting server on port 8080 ... 0|mmstart | [09:44:05.117] [INFO] ^[[33mYou're using a full whitelist configuration to allow for all IPs^[[39m 0|mmstart | [09:44:05.181] [LOG] Server started ... 0|mmstart | [09:44:05.191] [LOG] Connecting socket for: updatenotification 0|mmstart | [09:44:05.199] [LOG] Connecting socket for: MMM-DarkSkyForecast 0|mmstart | [09:44:05.207] [LOG] ====================== Starting node_helper for module [MMM-DarkSkyForecast] 0|mmstart | [09:44:05.213] [LOG] Connecting socket for: mmm-suncalc 0|mmstart | [09:44:05.219] [LOG] Starting node_helper for mmm-suncalc: 0|mmstart | [09:44:05.228] [LOG] Connecting socket for: calendar 0|mmstart | [09:44:05.234] [LOG] Starting node helper for: calendar 0|mmstart | [09:44:05.243] [LOG] Connecting socket for: newsfeed 0|mmstart | [09:44:05.249] [LOG] Starting module: newsfeed 0|mmstart | [09:44:05.251] [LOG] Sockets connected & modules started ... 0|mmstart | [09:44:05.254] [LOG] 0|mmstart | Ready to go! Please point your browser to: http://0.0.0.0:8080 0|mmstart | [09:44:05.328] [LOG] Whoops! There was an uncaught exception... 0|mmstart | [09:44:05.388] [LOG] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? 0|mmstart | [09:44:05.393] [LOG] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues 0|mmstart | [09:44:31.284] [LOG] Starting MagicMirror: v2.10.1 0|mmstart | [09:44:31.360] [LOG] Loading config ... 0|mmstart | [09:44:31.398] [LOG] Loading module helpers ... 0|mmstart | [09:44:31.413] [LOG] No helper found for module: alert. 0|mmstart | [09:44:31.758] [LOG] Initializing new module helper ... 0|mmstart | [09:44:31.768] [LOG] Module helper loaded: updatenotification 0|mmstart | [09:44:31.777] [LOG] No helper found for module: clock. 0|mmstart | [09:44:34.609] [LOG] Initializing new module helper ... 0|mmstart | [09:44:34.618] [LOG] Module helper loaded: MMM-DarkSkyForecast 0|mmstart | [09:44:34.649] [LOG] Initializing new module helper ... 0|mmstart | [09:44:34.657] [LOG] Module helper loaded: mmm-suncalc 0|mmstart | [09:44:34.663] [LOG] No helper found for module: calendar_monthly. 0|mmstart | [09:44:37.531] [LOG] Initializing new module helper ... 0|mmstart | [09:44:37.541] [LOG] Module helper loaded: calendar 0|mmstart | [09:44:37.947] [LOG] Initializing new module helper ... 0|mmstart | [09:44:37.955] [LOG] Module helper loaded: newsfeed 0|mmstart | [09:44:37.960] [LOG] All module helpers loaded. 0|mmstart | [09:44:37.965] [LOG] Starting server on port 8080 ... 0|mmstart | [09:44:38.049] [INFO] ^[[33mYou're using a full whitelist configuration to allow for all IPs^[[39m 0|mmstart | [09:44:38.114] [LOG] Server started ... 0|mmstart | [09:44:38.124] [LOG] Connecting socket for: updatenotification 0|mmstart | [09:44:38.134] [LOG] Connecting socket for: MMM-DarkSkyForecast 0|mmstart | [09:44:38.143] [LOG] ====================== Starting node_helper for module [MMM-DarkSkyForecast] 0|mmstart | [09:44:38.149] [LOG] Connecting socket for: mmm-suncalc 0|mmstart | [09:44:38.153] [LOG] Starting node_helper for mmm-suncalc: 0|mmstart | [09:44:38.159] [LOG] Connecting socket for: calendar 0|mmstart | [09:44:38.167] [LOG] Starting node helper for: calendar 0|mmstart | [09:44:38.176] [LOG] Connecting socket for: newsfeed 0|mmstart | [09:44:38.184] [LOG] Starting module: newsfeed 0|mmstart | [09:44:38.198] [LOG] Sockets connected & modules started ... 0|mmstart | [09:44:38.252] [LOG] 0|mmstart | Ready to go! Please point your browser to: http://0.0.0.0:8080 0|mmstart | [09:44:38.356] [LOG] Whoops! There was an uncaught exception... 0|mmstart | [09:44:38.418] [LOG] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? 0|mmstart | [09:44:38.423] [LOG] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues 0|mmstart | [09:45:06.640] [LOG] Starting MagicMirror: v2.10.1 0|mmstart | [09:45:06.856] [LOG] Loading config ... 0|mmstart | [09:45:06.930] [LOG] Loading module helpers ... 0|mmstart | [09:45:06.945] [LOG] No helper found for module: alert. 0|mmstart | [09:45:07.656] [LOG] Initializing new module helper ... 0|mmstart | [09:45:07.674] [LOG] Module helper loaded: updatenotification 0|mmstart | [09:45:07.689] [LOG] No helper found for module: clock. 0|mmstart | [09:45:13.291] [LOG] Initializing new module helper ... 0|mmstart | [09:45:13.310] [LOG] Module helper loaded: MMM-DarkSkyForecast 0|mmstart | [09:45:13.362] [LOG] Initializing new module helper ... 0|mmstart | [09:45:13.380] [LOG] Module helper loaded: mmm-suncalc 0|mmstart | [09:45:13.389] [LOG] No helper found for module: calendar_monthly. 0|mmstart | [09:45:19.079] [LOG] Initializing new module helper ... 0|mmstart | [09:45:19.087] [LOG] Module helper loaded: calendar 0|mmstart | [09:45:19.960] [LOG] Initializing new module helper ... 0|mmstart | [09:45:19.987] [LOG] Module helper loaded: newsfeed 0|mmstart | [09:45:20.007] [LOG] All module helpers loaded. 0|mmstart | [09:45:20.031] [LOG] Starting server on port 8080 ... 0|mmstart | [09:45:20.159] [INFO] ^[[33mYou're using a full whitelist configuration to allow for all IPs^[[39m 0|mmstart | [09:45:20.292] [LOG] Server started ... 0|mmstart | [09:45:20.303] [LOG] Connecting socket for: updatenotification 0|mmstart | [09:45:20.321] [LOG] Connecting socket for: MMM-DarkSkyForecast 0|mmstart | [09:45:20.331] [LOG] ====================== Starting node_helper for module [MMM-DarkSkyForecast] 0|mmstart | [09:45:20.339] [LOG] Connecting socket for: mmm-suncalc 0|mmstart | [09:45:20.343] [LOG] Starting node_helper for mmm-suncalc: 0|mmstart | [09:45:20.359] [LOG] Connecting socket for: calendar 0|mmstart | [09:45:20.369] [LOG] Starting node helper for: calendar 0|mmstart | [09:45:20.378] [LOG] Connecting socket for: newsfeed 0|mmstart | [09:45:20.394] [LOG] Starting module: newsfeed 0|mmstart | [09:45:20.397] [LOG] Sockets connected & modules started ... 0|mmstart | [09:45:20.410] [LOG] 0|mmstart | Ready to go! Please point your browser to: http://0.0.0.0:8080 0|mmstart | [09:45:20.554] [LOG] Whoops! There was an uncaught exception... 0|mmstart | [09:45:20.680] [LOG] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? 0|mmstart | [09:45:20.687] [LOG] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues 0|mmstart | [09:45:53.656] [LOG] Starting MagicMirror: v2.10.1 0|mmstart | [09:45:53.864] [LOG] Loading config ... 0|mmstart | [09:45:53.987] [LOG] Loading module helpers ... 0|mmstart | [09:45:54.028] [LOG] No helper found for module: alert. 0|mmstart | [09:45:55.278] [LOG] Initializing new module helper ... 0|mmstart | [09:45:55.292] [LOG] Module helper loaded: updatenotification 0|mmstart | [09:45:55.321] [LOG] No helper found for module: clock. -
-
Everything was stopped.
$ pm2 status ┌────┬────────────────────┬──────────┬──────┬──────────┬──────────┬──────────┐ │ id │ name │ mode │ ↺ │ status │ cpu │ memory │ ├────┼────────────────────┼──────────┼──────┼──────────┼──────────┼──────────┤ │ 0 │ mmstart │ fork │ 1780 │ stopped │ 0% │ 0b │ └────┴────────────────────┴──────────┴──────┴──────────┴──────────┴──────────┘ -
@kellogg76 pm2 info 0
-
Describing process with id 0 - name mmstart ┌───────────────────┬──────────────────────────────────────┐ │ status │ stopped │ │ name │ mmstart │ │ version │ N/A │ │ restarts │ 1780 │ │ uptime │ 0 │ │ script path │ /home/pi/mmstart.sh │ │ script args │ N/A │ │ error log path │ /home/pi/.pm2/logs/mmstart-error.log │ │ out log path │ /home/pi/.pm2/logs/mmstart-out.log │ │ pid path │ /home/pi/.pm2/pids/mmstart-0.pid │ │ interpreter │ bash │ │ interpreter args │ N/A │ │ script id │ 0 │ │ exec cwd │ /home/pi │ │ exec mode │ fork_mode │ │ node.js version │ N/A │ │ node env │ N/A │ │ watch & reload │ ✘ │ │ unstable restarts │ 0 │ │ created at │ 2020-03-28T19:51:14.338Z │ └───────────────────┴──────────────────────────────────────┘ Divergent env variables from local env ┌────────────────┬──────────────────────────────────────┐ │ SSH_CONNECTION │ 192.168.1.148 54823 192.168.1.166 22 │ │ XDG_SESSION_ID │ c2 │ │ SSH_CLIENT │ 192.168.1.148 54823 22 │ │ SSH_TTY │ /dev/pts/1 │ └────────────────┴──────────────────────────────────────┘ Add your own code metrics: http://bit.ly/code-metrics Use `pm2 logs mmstart [--lines 1000]` to display logs Use `pm2 env 0` to display environment variables Use `pm2 monit` to monitor CPU and Memory usage mmstart -
@kellogg76 said in MM on Pi Zero fails after being off for a few days:
/home/pi/mmstart.sh
can u show that file
