MM on Ubuntu

[goncalovsc]

@sdetweil Its on the printscreen, weather location changed etc etc
But as you can see, all unchanged https://gyazo.com/bdf479ec8837ed27c9727b0ac8d5877a

[sdetweil]

@goncalovsc again, can u show me the config.js file please… I don’t care about the output, you said it didn’t have any effect.

[goncalovsc]

@sdetweil ```
/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

language: "pt",
timeFormat: 24,
units: "metric",
// serverOnly:  true/false/"local" ,
		     // local for armv6l processors, default
		     //   starts serveronly and then starts chrome browser
		     // false, default for all  NON-armv6l devices
		     // true, force serveronly mode, because you want to.. no UI on this device

modules: [
	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "Feriados",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check",
					url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
			]
		}
	},
	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "Matosinhos",
			locationID: "2737824", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "18493e6342f2df4ac6ca7ed72fd3d79b"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			location: "Matosinhos",
			locationID: "2737824", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "18493e6342f2df4ac6ca7ed72fd3d79b"
		}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "Últimas Noticias",
					url: "https://www.cmjornal.pt/rss"
				}
			],
			showSourceTitle: true,
			showPublishDate: true,
			broadcastNewsFeeds: true,
			broadcastNewsUpdates: true
		}
	},
]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[sdetweil]

@goncalovsc ok, open the developers window, ctrl-shift-i on the keyboard, select the console tab,
enter ‘weath’ in the filter field (no quotes)

and u will see

weatherforecast.js:279 GET https://api.openweathermap.org/data/2.5/forecast/daily?id=2737824&units=metric&lang=en&APPID=18493e6… 401 (Unauthorized)
weatherforecast.js:266 weatherforecast: Your AppID does not support long term forecasts. Switching to fallback endpoint.

so, u need to change your openweather api key

[sdetweil]

@goncalovsc could u edit your post to put the 1st 3 backtics on a separate line (I can’t change it)

[goncalovsc]

@sdetweil Changed the API, still shows “Incorrect APPID”

[sdetweil]

@goncalovsc sorry, I do not know about the api itself…

on my system with your prior config, the weatherforecast module displayed

[sdetweil]

@sdetweil both displayed now

[goncalovsc]

@sdetweil My config file says config.js.sample
Is that suppose or?

[sdetweil]

@goncalovsc no…

config.js

there should be two files in the folder… config.js.sample (original as shipped )
config.js (copied from sample at install time), used from then on as live config

[goncalovsc]

@sdetweil It only came with this one at install. Should I copy this one and rename it to config.js?

[sdetweil]

@goncalovsc how did u do install?

it should not run without config.js

[goncalovsc]

@sdetweil I installed with the command you gave on the beggining of this thread

[sdetweil]

@goncalovsc my script will copy the sample

please do

cd ~/MagicMirror/config
ls -laF

show results

[goncalovsc]

@sdetweil said in MM on Ubuntu:

cd ~/MagicMirror/config

Here you have - https://gyazo.com/18000e7546ea27b9c3682acd33c1d27a

[sdetweil]

@goncalovsc config.js is present… which file did u edit?

[goncalovsc]

@sdetweil now its present because i copied it from config.js.sample and renamed it

[sdetweil]

@goncalovsc show me
~/install.log

[goncalovsc]

@sdetweil said in MM on Ubuntu:

~/install.log

ahhh permission denied, hou should i do it?

[sdetweil]

@goncalovsc why? you did not do sudo on install command, right?
do

ls ~/i* -laF