A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
cannot install pm2
-
@sdetweil ok done. Now should I try
bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)"again? -
@mrlowndes yes
-
@sdetweil same result:
pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)" the log will be saved in /home/pi/MagicMirror/installers/pm2_setup.log npm ERR! Unexpected end of JSON input while parsing near '...s":{"moment-timezone"' npm ERR! A complete log of this run can be found in: npm ERR! /root/.npm/_logs/2020-04-29T20_19_40_905Z-debug.log bash: line 103: pm2: command not found bash: line 180: pm2: command not found bash: line 183: pm2: command not found -
@mrlowndes ok, time to get crazy , kill all npm stuff
/cd ~ sudo apt-get purge -y npm sudo rm -rf .npm sudo apt-get install -y npm cd MagicMirror rm -rf node_modules npm installthen do the fixuppm2 script again
-
@sdetweil still nothing:
pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)" the log will be saved in /home/pi/MagicMirror/installers/pm2_setup.log npm ERR! Unexpected end of JSON input while parsing near '...pes/node":"^12.7.5","' npm ERR! A complete log of this run can be found in: npm ERR! /root/.npm/_logs/2020-04-29T21_00_10_606Z-debug.log bash: line 103: pm2: command not found bash: line 180: pm2: command not found bash: line 183: pm2: command not found -
@mrlowndes said in cannot install pm2:
npm ERR! Unexpected end of JSON input while parsing near '…pes/node":"^12.7.
u are getting weird failures…
every time we have seen this, it is the SD card failing.
-
hmm good question.
-
@sdetweil should be fine its a SanDisk Ultra Plus 64GB U1 SDXC
-
@sdetweil if it is the SD card, is it the kind of thing a deep format and reinstall of Raspbian will fix, or is the SD just terminally bad? Wen I reinstalled Raspbian the last time, I did just do a quick format on this card before flashing the image.
-
@mrlowndes when the sd card starts to fail, it is toast
-
@sdetweil bummer - it’s brand new out of the box. Just managed to scrounge another from my GoPro. Ill format that, reflash Raspbian and see how I go. I’ll just use your script first off, rather than doing a manual install. I’ll let you know how I get on, on here but it will take me a long time with all the updates that Raspbian does. Thanks so much for your help.
-
@mrlowndes ok, will be around…
-
someone else just reported a similar failure on a pi 0.
so, I reflashed my sd card with buster and ran the installer without any issues on a pi 0w
-
I ran your script and it didn’t finish - Unable to install dependencies! Also, this website has locked me out of singing into my account from my pi…
-
@sdetweil could it not be working because
npm WARN npm npm does not support Node.js v10.15.2? -
@mrlowndes hm I don’t know anything about how this website works. Just another user.
Can u show me the ~/install.log?
-
@mrlowndes no. Just a warning.
-
@sdetweil ok how do I access the log? Also, I’ve been trying some other stuff since my last message
-
install starting - Wed Apr 29 16:55:58 PDT 2020 installing on armv7l processor system the os is Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: buster [96mUpdating packages ...[90m Hit:1 http://archive.raspberrypi.org/debian buster InRelease Get:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] Fetched 15.0 kB in 1s (10.7 kB/s) Reading package lists... apt-get update completed ok apt-get upgrade started apt upgrade result =rc=0 Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages have been kept back: binutils binutils-arm-linux-gnueabihf binutils-common libbinutils scratch3 0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. [96mInstalling helper tools ...[90m Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.6). curl is already the newest version (7.64.0-4+deb10u1). git is already the newest version (1:2.20.1-2+deb10u3). unzip is already the newest version (6.0-23+deb10u1). wget is already the newest version (1.20.1-1.1). wget set to manually installed. 0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. [96mCheck current Node installation ...[0m [0mNode currently installed. Checking version number. [0mMinimum Node version: [1mv10.1.0[0m [0mInstalled Node version: [1mv10.15.2[0m [92mNo Node.js upgrade necessary.[0m [96mCheck current NPM installation ...[0m [0mNPM currently installed. Checking version number. [0mMinimum npm version: [1mV6.0.0[0m [0mInstalled npm version: [1mV5.8.0[0m [96mnpm should be upgraded.[0m [96mInstalling npm ...[90m Reading package lists... Building dependency tree... Reading state information... npm is already the newest version (5.8.0+ds6-4). npm set to manually installed. 0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. upgrading npm to latest /usr/local/bin/npx -> /usr/local/lib/node_modules/npm/bin/npx-cli.js /usr/local/bin/npm -> /usr/local/lib/node_modules/npm/bin/npm-cli.js + npm@6.14.4 added 435 packages from 869 contributors in 77.435s [92mnpm installation Done! version=V6.14.4[0m [96mCloning MagicMirror ...[90m [92mCloning MagicMirror Done