Read the statement by Michael Teeuw here.
MMM-GoogleAssistant with MMM-MotionDetector
-
@majik655 said in MMM-GoogleAssistant with MMM-MotionDetector:
I personally use MMM-NEW-PIR
@Bugsounet said in MMM-GoogleAssistant with MMM-MotionDetector:
For GA/A2D users it’s more natural to use screen/pir sub-module
Thank you, but MMM-MotionDetector works perfectly if I move around, it detects the motion and wake the screen up.
But I don’t want to wave in front of it just to wake it up, for example when I’m in the sofa without a move ;)@majik655 said in MMM-GoogleAssistant with MMM-MotionDetector:
But MAYBE you can look into the recipes…
That’s it! I had a few tries and I can get it Off or On with the Reboot-Restart-Shutdown recipe by modifying it with
vcgencmd display_power 1 or vcgencmd display_power 0```But could it be possible to power it on just by saying the hotword jarvis ?
Perhaps it would be complicated as it would have to check if it’s on or off first ? (ou pas) -
euh, it’s a native fonction
but … if you enable detectorSleeping if will not works because it’s turn off detector on the same time of the screen
and if detector (jarvis) is off … i will not hear you
verify your config :) -
Ok, I will continue to move my hands then :D
-
show me you A2D config so …
-
Sorry, got to go now, we’ll continue tomorrow, thanks and bonne soirée ;)
-
ok when you have time post it in private. i will resolve it :p
Note: why I need your A2D config ? just because i will try with it to reproduce non working fonctionality !
-
@Bugsounet said in MMM-GoogleAssistant with MMM-MotionDetector:
@majik655 said in MMM-GoogleAssistant with MMM-MotionDetector:
MMM-NEW-PIR
I have to update this module butI really don’t use it, because all fonctionnality is on A2D
I start to code A2D pir module to MMM-NewPir but not finish
I will continue it and commit it to master soonNote:
For GA/A2D users it’s more natural to use screen/pir sub-module of A2D because it’s lock screen on GA/A2D use and can’t turn off
MMM-NewPir have not this fonctionality (and can’t never have it, because i don’t want to do a dual code)example:
-
with GA / youtube and MMM-NewPir
defined tiner of NewPir is for example : 2 min
duration of video +/- 4 min
NewPir will turn off video at 2min -
with GA / A2D / youtube and screen/pir submodule of A2D
defined tiner of screen/pir is for example : 2 min
duration of video +/- 4 min
A2D will turn on the monitor for duration of video (playing)
A2D will restart the counter at the end of video
Hey @Bugsounet
I am not sure I follow you very well … but the reason why I needed or used NEW-PIR was because it was the only thing that did not actually turn off the monitor or go to sleep so the the monitor power saver showed.
As far as I know NEW-PIR throws up a “black” screen or something so that the monitor never “sleeps” and when it wakes the monitor doesn’t report the input (hdmi) or show the power save on sleeping.New-PIR was installed first… then I figured out how to install GA… then installed A2D, and then installed facial recognition …
It all seems to work fine the way I have it … honestly I couldn’t figure out the A2D commands and such in the beginning and do not want to reconfigure lol.
It all works great on my end for the moment I suppose. -
-
when it want to works ! don’t touch it lol ;)
-
Well I’ve been a bit optimist…
In fact there’s a problem with MotionDetector and a TV display, after a while the tv goes in deep sleep mode and does not wake up.
If I turn the energy saving off on the tv, it still stays on with a “no signal” message.
I’m trying some things with CEC at the moment wich can turn on a tv monitor, I’ll let you know …
-
@killerjoe34 I wrote my own sleep. module that hides everything, as my TV’s don’t support API on/off
-
@sdetweil said in MMM-GoogleAssistant with MMM-MotionDetector:
@killerjoe34 I wrote my own sleep. module that hides everything, as my TV’s don’t support API on/off
You mean that can turn the tv off and on ? With a black screen or does it really turn the display off ?
-
try with
rpi4:truein screen A2D config maybe i can help -
@killerjoe34 black screen not turn tv off
-
oupss sorry
-
@Bugsounet said in MMM-GoogleAssistant with MMM-MotionDetector:
try with
rpi4:truein screen A2D config maybe i can helpWas this for me ? :D
Cause I have a RPI3 and “Screen” is not enabled in my AD config -
@sdetweil said in MMM-GoogleAssistant with MMM-MotionDetector:
@killerjoe34 black screen not turn tv off
Well, could be interesting if I can’t get it working, I’ll ask you if I need a hand ;)
-
euh …I thinking that you use Motion detecetor and A2D screen/Pir sub-module (with gpio) but not
you are using another script …
sorry ;)Can’t help in this case sorry ;)
-
But when the display is off, I would like to turn it on by saying the hotword (Jarvis in my case)
that’s why your main request don’t work
after you can listen
ASSISTANT_LISTENnotification with another module for wakeup your screen (at condition that your find to wake up your screen) -
@Bugsounet Thanks a lot, that will help :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login