Display Control Board

[muggerrudd]

I pulled a display off a MS surface.

Display PN: VVX11F037N00

Resolution: 1920x1280
Voltage: 3.3
Signal: MIPI (4 data lanes) , 40 pins Connector
Panel Type: a-Si TFT-LCD , LCM

https://www.panelook.com/VVX11F037N00_Panasonic_11_LCM_overview_25444.html

I’ve done some googling without any clear answer.

What display controller board do I need?

[muggerrudd]

@muggerrudd

The cable coming from the assembly is a 35pin. Im assuming this is proprietary since the display has the screen and touch panel combined to a pcb.

[MadScientist]

@muggerrudd
Hmm, I have no experience with those displays. All I can see from your link is that it has a MIPI interface, instead of LVDS for regular LCD panels.
I did some 3 minutes google research and found mainly LCD+MIPI controller sets. On AliExpress I found single MIPI controllers but I don’t know what to look for when buying those.

Please let us know if you find out more. I think that could be interesting for others (and me).

[muggerrudd]

@madscientist

Here is an image of the back of the display.

The ribbon cable is 35pin.

[AveDalang]

Hi…Some more up to date Samsung LED-LCDs and LCDs with 240Hz processor have separate tests for FRC (movement upconverter/T-con) and principle board from administration menu, yet no entrance if TV will not catalyst and menus aren’t usable.