MMM-GroveGesture dont work anoymore

[mrSnatz]

everything went smoothly yesterday, but today he no longer reacts in MagicMirror.

But when I start the py file in the modules folder it shows me the gestures in the command line.

Except for a restart of the Pis, I have not changed in the config.

What could be the fault here?

/* Magic Mirror green 42 Zoll
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "de",
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
			     // local for armv6l processors, default
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
		  module: "MMM-Screencast",
		  position: "middle_center",
			config: {
				position: "center",
				height: "300",
				width: "500"
			}
		},
		{
			module: "clock",
			position: "top_left",
			config: {
				displayType: "digital",
				displaySeconds: "false",
				showWeek: "true",
				clockBold: "true"
			}
		},
		{
			module: "calendar",
			header: "Termine",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
					}
				]
			}
		},
		{
			module: "MMM-DarkSkyForecast",
			header: "Wetter",
			position: "top_right",
			classes: "default everyone",
			disabled: false,
			config: {
				apikey: "XXXXXXXXXXXXXXXXXXXXXXXXX", // Anmeldung bei darkskyforecast erforderlich
				latitude: "XXXXXXXX", // eingabe von Standortkoordinaten
				longitude: "XXXXXXXXX",
				iconset: "3c",
				concise: "true", //mehr oder weniger infos anzeigen lassen
				forecastLayout: "tiled", // tiled or table
				updateInterval: "10",
				showSummary: "false",
				label_days: ["So", "Mo", "Di", "Mi", "Do", "Fr", "Sa"],
				label_timeFormat: "k[h]",
				showWind: "false",
				language: "de"
			}
		},
		{
			module: "MMM-pages",
			config: {
				modules:
						[
							["clock", "calendar", "MMM-DarkSkyForecast", "newsfeed"],
							["MMM-Comics", "MMM-horoscope"],
							["newsfeed"]
						],
				fixed: ["alert", "clock", "updatenotification", "MMM-page-indicator", "MMM-GroveGestures"],
			}
		},
		{
			module: "MMM-page-indicator",
			position: "bottom_bar",
			config: {
				pages: 3,
			}
		},
		{
			module: "MMM-GroveGestures",
			position: "bottom_left",
			config: {
				autoStart: true, //When Mirror starts, recognition will start.
				verbose:true, // If set as `true`, useful messages will be logged.
				recognitionTimeout: 1000, //Gesture sequence will be ended after this time from last recognized gesture.
				cancelGesture: "WAVE", //If set, You can cancel gesture sequence with this gesture.
				visible: true, //Recognized gesture sequence will be displayed on position
				idleTimer: "0", // `0` for disable, After this time from last gesture, onIdle will be executed.
				defaultCommandSet: "DEFAULT_MODE",
				commandSet: {
					"DEFAULT_MODE": {
						"UP": {
						  shellExec: "amixer set Speaker -- 15%+" // Erhöht die Lautsärke um 15%
						},
						"DOWN": {
						  shellExec: "amixer set Speaker -- 15%-" // verringert die Lautstärke um 15%
						},
						"CLOCKWISE": {
						  shellExec: "vcgencmd display_power 1" // schaltet den HDMI Port am Pi an. Monitor geht an
						},
						"ANTICLOCKWISE": {
						  shellExec: "vcgencmd display_power 0" // schaltet den HDMI Port am Pi aus. Monitor geht in Standby
						},
						"LEFT": {
						        notificationExec: {
						          notification: "PAGE_DECREMENT",
						        }
						},
						"RIGHT": {
						        notificationExec: {
						          notification: "PAGE_INCREMENT",
						        }
	      					},
					},
					"0": {
						"UP": {
						  shellExec: "amixer set Speaker -- 15%+" // Erhöht die Lautsärke um 15%
						},
						"DOWN": {
						  shellExec: "amixer set Speaker -- 15%-" // verringert die Lautstärke um 15%
						},
						"CLOCKWISE": {
						  shellExec: "vcgencmd display_power 1" // schaltet den HDMI Port am Pi an. Monitor geht an
						},
						"ANTICLOCKWISE": {
						  shellExec: "vcgencmd display_power 0" // schaltet den HDMI Port am Pi aus. Monitor geht in Standby
						},
						"LEFT": {
						        notificationExec: {
						          notification: "PAGE_DECREMENT",
						        }
	      					},
						"RIGHT": {
						        notificationExec: {
						          notification: "PAGE_INCREMENT",
						        }
	      					},
					},
					"1": {
						"UP": {
						  shellExec: "amixer set Speaker -- 15%+" // Erhöht die Lautsärke um 15%
						},
						"DOWN": {
						  shellExec: "amixer set Speaker -- 15%-" // verringert die Lautstärke um 15%
						},
						"CLOCKWISE": {
						  shellExec: "vcgencmd display_power 1" // schaltet den HDMI Port am Pi an. Monitor geht an
						},
						"ANTICLOCKWISE": {
						  shellExec: "vcgencmd display_power 0" // schaltet den HDMI Port am Pi aus. Monitor geht in Standby
						},
						"LEFT": {
						        notificationExec: {
						          notification: "PAGE_DECREMENT",
						        }
	      					},
						"RIGHT": {
						        notificationExec: {
						          notification: "PAGE_INCREMENT",
						        }
	      					},
					},
					"2": {
						"UP": {
						  shellExec: "amixer set Speaker -- 15%+" // Erhöht die Lautsärke um 15%
						},
						"DOWN": {
						  shellExec: "amixer set Speaker -- 15%-" // verringert die Lautstärke um 15%
						},
						"CLOCKWISE": {
						  shellExec: "vcgencmd display_power 1" // schaltet den HDMI Port am Pi an. Monitor geht an
						},
						"ANTICLOCKWISE": {
						  shellExec: "vcgencmd display_power 0" // schaltet den HDMI Port am Pi aus. Monitor geht in Standby
						},
						"LEFT": {
						        notificationExec: {
						          notification: "PAGE_DECREMENT",
						        }
	      					},
						"RIGHT": {
						        notificationExec: {
						          notification: "PAGE_INCREMENT",
						        }
						},
					}
				},
				commandSetTrigger: {
					  "DEFAULT_MODE": "DEFAULT_MODE",
					  "PAGE_NUMBER_IS": (payload) => {return payload;}
				},
			}
		},
		{
			module: "MMM-NotificationTrigger",
			config: {
				useWebhook: false,
				triggers: [
					{
						trigger: "PAGE_DECREMENT",
						fires: [
							{
								fire: "QUERY_PAGE_NUMBER",
							}
						]
					},
					{
						trigger: "PAGE_INCREMENT",
						fires: [
							{
								fire: "QUERY_PAGE_NUMBER",
							}
						]
					}
				]
			}
		},
		  {
			module: "MMM-horoscope",
			position: "top_right",
			config: {
				sign: "libra",
			}
		},
		{
			module: "MMM-Comics",
			position: "Bottom_left",
			config: {
				comics: ["dilbert", "xkcd", "garfield", "peanuts", "calvin+hobbes"],
				updateInterval : 1000 * 60 * 30,
				coloredImage: true,
				maxWidth: 500,
				maxHeight: 500,
				timeForDaily: [6, 9],
			}
		},
		{
			module: "newsfeed",
			position: "bottom_center",
			config: {
				feeds: [
					{
						title: "Tagesschau",
						url: "http://www.tagesschau.de/xml/rss2"
					}
				],
				showSourceTitle: "true",
				showPublishDate: "true",
				showDescription: "true",
				lengthDescription: "400", //1-500 default is 400
				updateInterval: "20000" //1000-60000 defalut is 10000 (10sek)
			}
		},
	]
};
/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[mrSnatz]

Okay, I found the bug myself. For me, the sensor only works when all modules are loaded.

[Fozi]

@mrSnatz I can confirm your experience. Another bug is related to MMM-Remote. When I open MMM-Remote in a browser and change pages, MMM-GroveGesture stops and I need to reboot MM. I haven’t yet dug enough into this issue, but I will when I have some more time.

[mrSnatz]

@Fozi good to know. The remote function is still on my todo list

[illef]

@mrsnatz can you explain what you mean with “only works when all modules are loaded”?

Kannst du erklären, was du damit meinst?