MMM-FRITZ-Box-Callmonitor

[sdetweil]

@Ghost2000 come on. in the module folder, there is a folder called translations

[Ghost2000]

Great thanksworks. @sdetweil
De, json has to look like this for everyone

{
  "title": "Eingehender Anruf",
  "noCall": "Keine kürzlichen Anrufe.",  

  
  "calllist_parse_error": "Anrufliste unlesbar.",
  "phonebook_parse_error": "Telefonbuch unlesbar.",
  "vcf_parse_error": "vCard unlesbar.",
  "login_error": "Logindaten falsch?",
  "network_error": "FRITZ!Box nicht erreichbar.",
  "unknown_error": "Unbekannter Fehler."
}

en.json

{
  "title": "Incoming Call",
  "noCall": "No recent calls.",

  
  "calllist_parse_error": "Can't parse calllist.",
  "phonebook_parse_error": "Can't parse phonebook.",
  "vcf_parse_error": "Can't parse vCard.",
  "login_error": "Login data wrong?",
  "network_error": "Could not reach FRITZ!Box.",
  "unknown_error": "Unknown error."
}

[sdetweil]

@Ghost2000 in 2.14 it will not fail like this, but the translation file will not be loaded. an error message in the dev window will indicate what file failed.

fix also available in the develop branch

this issue is pinned to the top of the troubleshooting section currently

https://forum.magicmirror.builders/category/10/troubleshooting

[Foxy25]

Hi,
First: everything works well, but i have some question about the devicefilter:

What do I have to register exactly there?

The Telephonnumber? The name of the “device”? The “intern number”?

I know that this works like:
the “devicefilter entry” filters, the incoming calls for this phonenumber, out.

In my case we have 3 DECT-Phones and i want display only one from this devices on the MM-Screen when the call come in.

Thank you all for your Support.

Greetngs from Germany
Foxy

[Laurids]

@foxy25 Hi, after a new installation of MagicMirror I have problems with the callmonitor. The MM shows the number of incoming calls, but the list of missing calls is empty. When I set

showContactsStatus: true

,then I only get two rotating arrows behind “no calls”, instead of the number of entrys of my phonebook.
I tried all the advices in this thread, but nothing works. In another thread I found, that it would be helpful to uninstall Python and install version 0.5.0. Can someone explain, how to do this?
Thanks and best regards

[ShadowMG]

Hi, tried endlessly on a new installation to get calls showing again.
Current call works
I get the error of:

pi@WestMainServ100:~/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor $ python fritz_access.py -p xxxxxx -u xxx -i 192.168.62.1
Traceback (most recent call last):
  File "fritz_access.py", line 1, in <module>
    import argparse, os, fritzconnection, urllib2, sys, json
ImportError: No module named fritzconnection

Changed the files node_helper.js, package.json and fritz_access.py.

This is my config.js part:

        {
                //disabled: true,
                module: 'MMM-FRITZ-Box-Callmonitor',
                position: 'top_left',   // This can be any of the regions. Best results in left or right regions.
                header: "Letzte Anrufe", // This is optional
                config: {
                        user: "",
                        password: "xxxxxx",
                        deviceFilter: ["TelefoneWestFritzbox"],
                        vCard: "/home/pi/MagicMirror/contacts.vcf",
                        maximumCallDistance: 3000,
                        maximumCalls: 5,
                        fritzIP: "192.168.62.1",
                        // See 'Configuration options' for more information.
                }
        },

And the MMM-FRITZ-Box-Callmonitor.js:

        // Default module config.
        defaults: {
                numberFontSize: 30,
                vCard: true,
                fritzIP: "192.168.62.1",
                fritzPort: 1012,
                minimumCallLength: 0,
                maximumCallDistance: 60,
                maximumCalls: 5,
                fade: true,
                debug: false,
                fadePoint: 0.25,
                username: "",
                password: "xxxxx",
                reloadContactsInterval: 30, // 30 minutes, set to 0 to disable
                deviceFilter: ["TelefoneWestFritzbox"], // [] means no filtering
                showContactsStatus: true
        },

I installed different versions of fritzconnect. No clue what to do next…

Thank you, Matthias

[requiemmg]

@shadowmg
Just did a fresh install today. Installed MMM-FRRITZ-Box-Callmonitor, did npm install and installed fritzconnection.
Also installed fritzconnection.

pi@smartmirror:~/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor $ fritzconnection

fritzconnection v1.8.0
FRITZ!Box 6591 Cable at http://169.254.1.1
FRITZ!OS: 7.29

But when I use

python fritz_access.py -u user -p pass -i 192.168.0.1

i get

Traceback (most recent call last):
  File "fritz_access.py", line 1, in <module>
    import argparse, os, fritzconnection, urllib2, sys, json
ImportError: No module named fritzconnection

Any idea on how to fix this? @paviro @sdetweil?

[sdetweil]

@requiemmg u need the python library for fritzconnection, whatever that is. separate install

[requiemmg]

@sdetweil Thanks, yes, this has been installed with sudo apt-get install python-dev libxml2-dev libxslt1-dev zlib1g-dev && sudo pip install fritzconnection as stated on the plugins’ page (https://github.com/paviro/MMM-FRITZ-Box-Callmonitor) and https://pypi.org/project/fritzconnection/

And as stated above: When I call fritzconnection from shell, it works. But when I call the script used by the plugin, it fails on the import of the library and I have no idea why.

[sdetweil]

@requiemmg said in MMM-FRITZ-Box-Callmonitor:

But when I call the script used by the plugin

typically this fails cause the python ‘virtual environment’ is not setup correctly

https://www.tutorialspoint.com/python/python_environment.htm

usually that means the shell started from code (not UI) startup script (usually ~/.bashrc, for bash ) doesn’t set the PATH correctly

[requiemmg]

@sdetweil Tried to fix this with
export PATH=“$PATH:/usr/local/bin/fritzconnection”

and
export PATH=“$PATH:/usr/local/bin/python”

to no avail…error stays the same

[sdetweil]

@requiemmg where?

[requiemmg]

from where I executed this command? from the modules’ directory.

The module is working if I use the .vcf method. But not if I want to log in via the module to fetch the latest calls.

[sdetweil]

@requiemmg said in MMM-FRITZ-Box-Callmonitor:

But not if I want to log in via the module

i don’t know what that means, but I assume that the module will exec or spawn the script somehow

and THAT is where the path needs to be set , at the time of exec/spawn

[requiemmg]

@sdetweil When I put it in the script in the first line, it will thow an invalid syntax error. Sorry, I guess I have to stick with the current functionality, I have no programming skills.
Thanks for your help.

[sdetweil]

@requiemmg no… it would be in the module code that launches the script

[requiemmg]

@sdetweil Thanks. That’s way beyond my abilities.