Read the statement by Michael Teeuw here.
[ORDER CLOSED] Two way mirror order in Germany
-
@Goldjunge_Chriz Thank you very much for your reply. Of course I completely understand that you closed the list and if you give me the chance to participate there will be others with the same wish. Anyway, if you and the other members see a way to put me on the list - that would be wonderful! Thank you for your efforts!
As I said, I can transfer the money immediately, so there qould be no delay caused of my participation.
Looking forward to see what the other members think. THANKS! -
I think in the same way. Are there any disadvantages because of the order of @oberschlingel ? It takes a bit more of time for you to pack but it wouldn’t be so noticable for us, wouldn’t it?
Let him get his mirror ;) As long as there are confirmations left.
-
@strawberry-3.141
@Ashidian
THANK YOU :) -
My measurements need to be reduced to 765mm * 765mm
The rest (polished edges, delivery to Cologne) stays the same.Confirmed with this change.
Sidenote: @Binog would like to share delivery to Cologne with me. So if he confirms his order, then please take this into your calculations ;)
-
I confirm my entry and agree with accepting @oberschlingel. Great initiative! :)
-
@Goldjunge_Chriz Hi Chriz: du you have my order marked as confirmed with the new dimensions?
-
@Goldjunge_Chriz said in Two way mirror order in Germany:
@cpramhofer
Unfortunately, this is still too big. DHL has the maximum size for international shipping of 120x60x60cm. At Hermes, the longest + shortest side must be smaller than 120cm. Since the crate is of course larger than the mirror, we exceed the maximum with your dimensions. The other shipping companies like DPD, UPS, Iloxx etc are unfortunately much too expensive.@all @fox
I just updated the list above and adjusted it -
confirmed, confirmed, confirmed…
-
i confirmed by this way again, but you know, i pickup some mirror here an my mirrors anyway too.
;-) your master list hasn’t confirmation at my position.
-
I want to confirm my order. 80 x 55 cm, polished edges and shipping to Skanör, Sweden. Thanks for everything @Goldjunge_Chriz!
-
@strawberry-3-141 @Ashidian
You are absolutely right. I just want to avoid the later someone says “hey you had a deadline set and then you do not stand to it. That’s unfair. If I had known that before then I would have had more time” or something like that. So I wanted to ask you so I do not decide this alone.For me a mirror more is no problem. If I make someone happy with it, I am also happy. :)
@oberschlingel
You are in :)@yawns @Binog @gustav1976 @olexs
What do you think of this proposal: I drive the mirror to Frankfurt where I meet with @olexs and @gustav1976. He takes his mirrors and the mirrors from @Binog and @yawns to Koblenz, where one of them takes the mirrors and bring the mirrors to Cologne. Would that be interesting for you? I think this would be the cheapest way for you all and the mirrors would be transported personally. What do you mean? -
MASTER LIST:
# username sizes (m) area (m²) location additional comments pickup/delivery confirmed 01 yawns 0.765 * 0.765 0.59 Germany, Cologne polished edges delivery ✓ 02 gustav1976 0.6 * 1.8 1.08 Germany, Koblenz polished edges delivery ✓ 03 gustav1976 1.0 * 1.2 1.20 Germany, Koblenz polished edges delivery ✓ 04 gustav1976 1.4 * 0.8 1.12 Germany, Koblenz polished edges delivery ✓ 05 lolobyte 0.8 * 0.6 0.48 Germany, Heilbronn polished edges pickup ✓ 06 lolobyte 0.8 * 0.6 0.48 Germany, Heilbronn polished edges pickup ✓ 07 Jeff 1.0 * 0.6 0.6 Germany, Karlsruhe polished edges pickup 08 Ashidian 0.69 * 0.435 0.3 (pay 0.4) Germany, Rostock polished edges delivery ✓ 09 cpramhofer 1.2 * 0.7 0.84 Austria, Vienna polished edges delivery 10 Schlachtkreuzer ~ 1.0 * 1.0 ~ 1.0 Austria, Vienna polished edges delivery 11 mcg 0.5 * 1.0 0.5 Germany, Ludwigshafen polished edges pickup in Heilbronn 12 cfenner 0.667 * 0.667 0.45 Germany, Mannheim polished edges pickup in Heilbronn 13 sero 0.5 * 0.4 0.2 (pay 0.4) Germany, Stuttgart polished edges pickup in Heilbronn ✓ 14 Deepgear 0.46 * 1.5 0.69 Germany, Pforzheim just cut pickup 15 Binog 0.8 * 0.5 0.4 Germany, Cologne polished edges delivery ✓ 16 yaye 0.5 * 0.4 0.2 (pay 0.4) Germany, Stuttgart polished edges pickup in Heilbronn ✓ 17 Ali Baba 0.4 * 1.0 0.4 Germany, Hoyerswerda polished edges delivery ✓ 18 mantha 0.563 * 0.97 0.55 Germany, Ulm polished edges pickup in Heilbronn ✓ 19 fox 0.553 * 0.323 0.18 (pay 0.4) Germany, Schwabmünchen polished edges delivery ✓ 20 wiloo 0.7 * 0.5 0.35 (pay 0.4) Germany, Traunstein polished edges delivery ✓ 21 ace0024 1.7 * 0.45 0.76 Germany, Neuried near Munich polished edges delivery ✓ 22 mire 0.8 * 1.0 0.8 Germany, Ludwigsburg polished edges pickup in Heilbronn ✓ 23 selarp 0.55 * 0.8 0.44 Schweden polished edges delivery ✓ 24 jupilde 0.6 * 0.9 0.54 Germany, Stuttgart polished edges pickup in Heilbronn 25 ZombieDE 0.36 * 1.0 0.36 (pay 0,4) Germany, Passau polished edges delivery 26 olexs 0.63 * 0,379 0.239 (pay 0,4) Germany, Bad Homburg polished edges delivery 27 ferby09 0.6 * 1.0 0.6 Germany, Berlin polished edges delivery ✓ 28 oberschlingel 0.54 * 0.8 0.43 Germany, Berlin polished edges delivery 29 tomster 1 * 0.8 0.8 Germany, Munich polished edges delivery 30 tomster 0.74 * 0.54 0.4 Germany, Munich polished edges delivery 31 tomster 0.345 * 0.265 0.09 (pay 0.4) Germany, Munich polished edges delivery 32 webmasterrn 0.4 * 0.5 0.2 (pay 0.4) Germany, Esslingen polished edges pickup in Heilbronn 33 miek 0.6 * 0.8 0.48 Austria, Vienna polished edges delivery Total 19.23 (17.75) -
Servus Chriz,
is the list still open or already closed? I’d like toorder the following sheet sizes:
1.0 * 0.8
0.345 * 0.265
Polished edges. Pick-up possible but shipping preferred.
Could also drive up to Schweinfurt from Planegg/ Munich though…BTW, you would not happen to have a bit more information for me on manufacturer/model type or transparency/reflexion ratio, would you? Or is this a “company secret”?
Best regards,
TomServus Chriz,
ist die Liste noch offen oder schon endgültig zu?
Ich würde folgende Zuschnitte nehmen:
1.0 * 0.8
0.345 * 0.265
Polierte Kanten
Abholung möglich, Versand wär mir lieber. Fahr ich halt schnell von Planegg bei München hoch…
Hast Du noch Infos über Hersteller/ Typ oder Transparenz-/Reflexionsverhältnis für mich? Oder ist das “Berufsgeheimnis”?LG,
Tom -
@tomster
Yes an order is still possible. Pickup would be really great. Maybe you can get together with people from your area to save fuel costs (@fox @wiloo @ace0024).
Unfortunately, I can not name the manufacturer, because he wants to avoid individual requests from individuals which cause a high administrative effort. If I would tell the manufacturer he would get daily mails of people who want only one mirror and I get anger ;) -
OK, I see.
Just noticed that there’s a 0.4m² limitation. I assume that 0.345 * 0.265 would not be possible then, would it? If it is I’ll take it.
Please add a third sheet with dimensions of 0.74 * 0.54.
Regards,
Tom -
@tomster
Dabei handelt es sich um eine sogenannte Mindestberechnungsfläche. Das bedeutet, dass du deine gewünschte Größe problemlos bestellen kannst, jedoch den Betrag für 0,4 m2 bezahlen müsstest. Generell ist jede Größe möglich.Da es sich hier um ein englischsprachiges Forum handelt, möchte ich dich bitten auch in Englisch zu schreiben. Das ist wichtig, damit jeder Forenmember mitlesen kann. Wenn dir Englisch jedoch zu schwer fällt, ist Deutsch in Ausnahmefällen okay. Viele Grüße
-
No prob. English is fine with me.
So my order would be:
1.0 * 0.8
0.74 * 0.54
0.345 * 0.265
All of the above with polished edges.
Shipping still preferred ;-)Best regards,
Tom -
@Goldjunge_Chriz My current order is a 0.36 x 1.0 m mirror for a 27 zoll monitor like this.
I will (probably) use the BenQ GL2760H (contrast 1000:1, brightness 300 nits = 300 cd/m²).
Will I have any problems with bleeding when the mirror is so much larger? -
@Goldjunge_Chriz said in Two way mirror order in Germany:
@strawberry-3-141 @Ashidian
You are absolutely right. I just want to avoid the later someone says “hey you had a deadline set and then you do not stand to it. That’s unfair. If I had known that before then I would have had more time” or something like that. So I wanted to ask you so I do not decide this alone.For me a mirror more is no problem. If I make someone happy with it, I am also happy. :)
@oberschlingel
You are in :)@yawns @Binog @gustav1976 @olexs
What do you think of this proposal: I drive the mirror to Frankfurt where I meet with @olexs and @gustav1976. He takes his mirrors and the mirrors from @Binog and @yawns to Koblenz, where one of them takes the mirrors and bring the mirrors to Cologne. Would that be interesting for you? I think this would be the cheapest way for you all and the mirrors would be transported personally. What do you mean?Funny idea, Chriz, but sadly my car lost its TÜV-approval. Hence, i’d have to go by train, which could easily result in transportation damage. So, in case a guy from cologne would take the trip down to FFM and stop by at Koblenz, I would happily offer to pay for his transportation efforts (coffee included).
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login