node_helper.js does not work.

[emrhssla]

I transferred what I had done with Mac to the Raspberry pie. I only tried the basic reservation code because the result I wanted was not available. But it didn’t work, either.
It’s good at Mac. Why not at Raspberry Pi?
MMM-TestPython.js

var Testpythons;
Module.register("MMM-Testpython", {

    defaults: {},
    start: function (){
        Testpythons = this;
    },
  
  getDom: function() {
    var element = document.createElement("div")
    element.className = "myContent"
    element.id="divid"
    element.innerHTML = "Hello, World!!! " + this.config.foo
    var subElement = document.createElement("p")
    subElement.innerHTML = "Click" 
    subElement.id = "clickid"
    element.appendChild(subElement)
    return element
  },
  
  notificationReceived: function(notification, payload, sender) {
    switch(notification) {
      case "DOM_OBJECTS_CREATED":
      var elem = document.getElementById("clickid")
      elem.addEventListener("click", () => {
        Testpythons.sendSocketNotification("TEST")
        console.log("hello~hello~hello~hello~hello~hello~hello~hello~hello~hello~")
        elem.innerHTML = "click success"       
      }) 
        break
    }
  },
  socketNotificationReceived: function(notification, payload) {
    switch(notification) {
      case "I_DID":
        console.log("Socket recevied : "+payload)
        var elemk = document.getElementById("divid")
        elemk.innerHTML = payload
        break
    }
  }

})

node_helper.js

var NodeHelper = require("node_helper");
var socketTestpython;
module.exports = NodeHelper.create({
  start: function() {
    socketTestpython=this;
  },
  
  socketNotificationReceived: function(notification, payload) {
    switch(notification) {
      case "TEST":
        console.log("notification : " + notification)
	socketTestpython.sendSocketNotification("I_DID",'hello');        
        break
    }
  },
}) 

npm start dev &

in terminal=>

pi@raspberrypi:~/Desktop/MagicMirror $ npm start dev &
[1] 1452
pi@raspberrypi:~/Desktop/MagicMirror $

magicmirror@2.7.1 start /home/pi/Desktop/MagicMirror
sh run-start.sh “dev”

Starting MagicMirror: v2.7.1
Loading config …
Loading module helpers …
Initializing new module helper …
Module helper loaded: updatenotification
No helper found for module: helloworld.
All module helpers loaded.
Starting server on port 8080 …
Server started …
Connecting socket for: updatenotification
Sockets connected & modules started …
Launching application.

[sdetweil]

@emrhssla which MM are u working in?

/home/pi/Desktop/Beauty (see its config/config.js
or
/home/pi/Desktop/Beauty/MagicMirror one? (see ITS config/config.js

they are different (u have MagicMirror installed INSIDE a MagicMirror folder)
to fix this, in /home/pi/Desktop/Beauty do

mv MagicMirror ..

now you will have

/home/pi/Desktop/Beauty
and
/home/pi/Desktop/MagicMirror

[sdetweil]

@emrhssla what is the error?

open a terminal window or ssh window

do

npm start dev &

node_helper output will show up in the terminal window

then on the mirror UI, developers window
select the console tab

note that the filenames are CASE sensitive
so you code should be in

mm/modules/MMM-TestPython

[emrhssla]

@sdetweil
in terminal, output is

pi@raspberrypi:~/Desktop/MagicMirror $ npm start dev &
[1] 1452
pi@raspberrypi:~/Desktop/MagicMirror $

magicmirror@2.7.1 start /home/pi/Desktop/MagicMirror
sh run-start.sh “dev”

Starting MagicMirror: v2.7.1
Loading config …
Loading module helpers …
Initializing new module helper …
Module helper loaded: updatenotification
No helper found for module: helloworld.
All module helpers loaded.
Starting server on port 8080 …
Server started …
Connecting socket for: updatenotification
Sockets connected & modules started …
Launching application.

after click,That’s all.
There are no errors, and console.log() is not visible from the terminal window.

[sdetweil]

@emrhssla i cut/pasted your code to create your module, added it to config.js
and it performs as expected…

i get in developers console

hello~hello~hello~hello~hello~hello~hello~hello~hello~hello~    MMM-Testpython.js:62
 Socket recevied : hello                                        MMM-Testpython.js:71

and in terminal window

notification : TEST

config entry

{
  module: "MMM-Testpython",
  disabled: false,
  position: "middle",
  config:{
    
  }
},

[sdetweil]

after the npm start &

press enter… you should get the prompt back, and can do any command

add this to your node module start function

  start: function() {
    socketTestpython=this;
    console.log(this.name + " node_helper started")    // < ---- add this

should see this in terminal window

MMM-Testpython node_helper started

i do

[emrhssla]

@sdetweil

[sdetweil]

@emrhssla that console output doesn’t make sense… cause u should have seen this line at least

Module helper loaded: MMM-Testpython

before the

Launching application 

show me your config.js

[emrhssla]

@sdetweil

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "0.0.0.0", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1","172.16.100.133", "::ffff:172.16.100.133", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 24,
	units: "metric",

	modules: [
		//0
		{
			module: 'MMM-iFrame',
			position: "bottom_center",	// This can be any of the regions.
			config: {
				// See 'Configuration options' for more information.
					url: ["https://comic.naver.com/webtoon/weekday.nhn"],  // as many URLs you want or you can just ["ENTER IN URL"] if single URL.
					updateInterval: 0.5 * 60 * 1000, // rotate URLs every 30 seconds
					width: "2000", // width of iframe
					height: "1800", // height of iframe
					frameWidth: "950", // width of embedded iframe, height is beeing calculated by aspect ratio of iframe
				}
		},
		//1
		{
			module: "MMM-EmbedYoutube1", 
			position: "bottom_bar",	
			config: {
				video_id: "w3jLJU7DT5E",
				searchlist1: "쯔위",
				loop: true
			}
		},
		//2	
        {
            module: "MMM-Modulebar1",
            position: "top_left", 
            classes: "default everyone", 
            config: {
						
                
            }
		},
		//3
		{
            module: "MMM-Modulebar",
            position: "top_left",
            classes: "default everyone", 
            config: {
						

            
            }
        },
        
        {
            module: "MMM-Dynamic-Modules",
        },
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_right"
		},
		
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
			  module: "MMM-Testpython",
			  disabled: false,
			  position: "middle",
			  config:{
			    
			  }
		},
	]

};

[sdetweil]

@emrhssla that doesn’t match with the terminal window output…

in terminal window only

Starting MagicMirror: v2.7.1
Loading config …
Loading module helpers …
Initializing new module helper …
Module helper loaded: updatenotification   < ----
No helper found for module: helloworld. < -----
All module helpers loaded.
Starting server on port 8080 …
Server started …
Connecting socket for: updatenotification   
Sockets connected & modules started …
Launching application.

there are only two modules referenced…

never mind, two of mine don’t have position and work fine
delete ---------also, all modules require a position

[sdetweil]

this what I see on my startup in the terminal window, before the node_modules start outputing their text

Starting MagicMirror: v2.7.0-develop
Loading config ...
Loading module helpers ...
No helper found for module: alert.
Initializing new module helper ...
Module helper loaded: updatenotification
No helper found for module: clock.
Initializing new module helper ...
Module helper loaded: calendar
handler helper in init
Module helper loaded: MMM-SleepWake
Initializing new module helper ...
Module helper loaded: MMM-ImagesPhotos
Initializing new module helper ...
Module helper loaded: newsfeed
Initializing new module helper ...
Module helper loaded: MMM-AssistantMk2
Initializing new module helper ...
Module helper loaded: MMM-Hotword
Initializing new module helper ...
Module helper loaded: WaterLevels
Initializing new module helper ...
Module helper loaded: MMM-Testpython
All module helpers loaded.
Starting server on port 8086 ...
You're using a full whitelist configuration to allow for all IPs
Server started ...
Connecting socket for: updatenotification
Connecting socket for: calendar
Starting node helper for: calendar
Connecting socket for: MMM-SleepWake
handler helper in start
Connecting socket for: MMM-ImagesPhotos
Starting node helper for: MMM-ImagesPhotos
Connecting socket for: newsfeed
Starting module: newsfeed
Connecting socket for: MMM-AssistantMk2
Connecting socket for: MMM-Hotword
MMM-Hotword started
Connecting socket for: WaterLevels
Starting module: WaterLevels
Connecting socket for: MMM-Testpython
MMM-Testpythonnode_helper started
Sockets connected & modules started ...
Launching application.