Read the statement by Michael Teeuw here.
Raspberry Pi 4 Released !
-
@lavolp3 said in Raspberry Pi 4 Released !:
@Cr4z33 ho ho, hold on you’re quite fast here with your conclusions.
What else should one do to deliver the picture via HDMI?Have you heard of more people having problems with HDMI adapters and the Pi 4?
Yes on a Rpi Facebook group.
It surely might depend also on what adapter you are going to use, but don’t expect 100% guarantee that it will work fine at 4K@60Hz.
I spent € 7,00 for that crap adapter, sent it back to Amazon and got a proper micro HDMI to HDMI cable certified for 4K for the same amount.
-
@lavolp3 said in Raspberry Pi 4 Released !:
@dazza120 I’m afraid a heatsink won’t help much but am curious about your results. I haven’t had good results with heatsinks in the past.
Only because you haven’t seen my thermal solution lol, this is one seriously hot chip, had it upto 82 for one reading on the stress test but still at 1.5Ghz on the CPU after that reading it dropped to 80degress this is with just the heat sink no fan. 82degress was during my second stress test and that was just one reading the gap between tests was about 30seconds during both tests no CPU throttling happened. I have put a cable tie around the board and heatsink to keep the pressure on it so it transfers good heat. Not the prettiest but behind a tv well it’s not out of place at all. PS the stress test is 100% cpu usage and no let up during the test had task manager up and CPU usage never fell below 💯
PS works fine on HDMI cable no issues at all
-
@dazza120 what heatsink beast is that? :grinning_face_with_smiling_eyes:
-
@Cr4z33 said in Raspberry Pi 4 Released !:
@dazza120 what heatsink beast is that? :grinning_face_with_smiling_eyes:
😂 it’s from a HP comp pro 6300 fits the LGA1155 socket, had to grind a bit by the hdmi port to fit the cable but no issues at the back by the pins I put duct tape so it doesn’t get into any trouble back there. Those cheap ally cast heatsinks would have died long time heat pipes in cooling makes a lot of difference
-
@dazza120 lol I see.
I wanted to preorder a Flirc Rpi4 metal case, but shipping is costing TWICE the value of the case…
-
@Cr4z33 said in Raspberry Pi 4 Released !:
@dazza120 lol I see.
I wanted to preorder a Flirc Rpi4 metal case, but shipping is costing TWICE the value of the case…
Flirc case is the same it’s too hard to cool once heated no fins no way for it to shift it once upto temp you get the run away temp where it just keeps rising. My solution has no such issues even though it was like out of one of Linus Tech Tips handbooks lol. I would like to see any other heatsink or case do 20min stress test 😂 and my temp in the house is 26.5c so that’s dam good going
-
@dazza120 and how did you fix the heatsink to the board?
-
@Cr4z33 said in Raspberry Pi 4 Released !:
@dazza120 and how did you fix the heatsink to the board?
Thermal tape and a cable tie around the board and heat sink as long as the pi isn’t viewable then it doesn’t really matter it is a lot taller with the heat sink though. But at least if you really wanted to you could run this passively, I will have a little fan as well but that works when the tv is on so running the mirror in the background would be all of this heat sink no fan
-
@dazza120 oh alright that’s the same solution I used with another board. 👍🏼
-
@Cr4z33 said in Raspberry Pi 4 Released !:
@dazza120 oh alright that’s the same solution I used with another board. 👍🏼
PS you will have to grid down the heat sink by the hdmi cable and the wings to allow it to fully seat the heat sink
