MMM-MarineWeather

ryanbeljan

@grena this is a super cool module! I noticed that there are quite a few other weather parameters that the StormGlass API offers (i.e. gust, cloudCover, seaLevel, visibility, etc.) that aren’t yet built into your module. Do you have any tips/guide for how I would go about adding them in?

https://docs.stormglass.io/#/weather

boivinmi

@grena I also have the same behavior. Here is my config :

{
   module: "MMM-MarineWeather",
   header: "Marine Weather",
   position: "top_right",
   config: {
      latitude: 46.829853,  // Latitude 
      longitude: -71.254028, // Longitude
      appid: "414492aa-c717-11e9-a3da-0242ac130004-4144953e-c717-11e9-a3da-0242ac130004",
      dataSource: "sg",
      params: "airTemperature,windSpeed,windDirection"
   }
},

And result is :
2020-05-19 13_28_11-MagicMirror².png

Deckard99

I’m having the same issue where it just displays “Loading”…….

{
module: “MMM-MarineWeather”,
position: “top_right”,
config: {
latitude: 32.7157,
longitude: 117.16,
appid: “XXXXXXXX-9a15-11ea-b3e2-0242ac130002-9be8a7f6-9a15-11ea-b3e2-0242ac130002” //StormGlass API Key (docs.stormglass.io)
}
},

grena

@ryanbeljan : Thank you for your positive feedback. I will work on a new version of the module to use the new information of API v2 (currently the module uses API v1)

@boivinmi : Currently, it’s not possible to choose the information displayed with params. By removing this line from your configuration, it works fine!

@Deckard99 : Indeed, there is a problem with waveHeight at your location (probably because it is a lake and not the sea). In the next version, I will integrate a better detection of this type of error to avoid the total blocking of the module!

boivinmi

@grena : Sorry no luck, I removed every config except latitude, longitude et appid and it still shows Loading…

grena

@boivinmi
With your MMM-MarineWeather configuration, it works fine! Did you restart the magic mirror?

{
   module: "MMM-MarineWeather",
   header: "Marine Weather",
   position: "top_right",
   config: {
      latitude: 46.829853,  // Latitude 
      longitude: -71.254028, // Longitude
      appid: "414492aa-c717-11e9-a3da-0242ac130004-4144953e-c717-11e9-a3da-0242ac130004"
   }
},

Since I can’t reproduce your bug, you have to see if there are any error messages in the console!

Deckard99

@grena I am by the Pacific Ocean…not a lake…not that I don’t like lakes

grena

@Deckard99 said in MMM-MarineWeather:

latitude: 32.7157,
longitude: 117.16,

For me, the place associated with this coordinates is located near a lake in China! You may be able to verify that the coordinates are correct: www.latlong.net

Deckard99

Google says this is San Diego…where I live…

v2 is up an working, great job!

grena

@Deckard99 said in MMM-MarineWeather:

Google says this is San Diego…where I live…

I think you forgot the - for the longitude (to the west of Greenwich) !

With these coordinates, you’re in San Diego!

latitude: 32.7157,
longitude: -117.16,