Read the statement by Michael Teeuw here.
Problem when installing MagicMirror on Raspbian Buster RPB3+
-
I swear I said yes for the pm2 lol. Oke Im gonna reinstall !
-
Same problem :(
-
@thomaslc are u doing this over vpn or ssh?
i use ssh, and then the display on my real machine shows the MagicMirror UI, while the ssh session is still active…
-
@sdetweil said in Problem when installing MagicMirror on Raspbian Buster RPB3+:
are u doing this over vpn or ssh?
Nop without vpn or ssh, last fresh rasbian os and directly connected to my box with rj45 ethernet
-
@thomaslc also, the output says pm2 started MM and it is running , before u typed in your command…
can u send me the ~/install.log
same userid as here on gmail…
-
@sdetweil i am building a buster image for myself now
-
@sdetweil And do you know why the original Magic Mirror link doesnt work ?
-
@thomaslc said in Problem when installing MagicMirror on Raspbian Buster RPB3+:
And do you know why the original Magic Mirror link doesnt work ?
cause it is old, doesn’t handle a bunch of things… which is why I am doing the updated version…
once tested I will submit mine to replace the one on the MM site -
@thomaslc thanks for the log… found a bug in the installer on buster… testing fix now
-
Nice ! Keep me in touch !
-
@thomaslc while I test the installer, u could use the pm2 only script
see instructions here , fix already added
installer also tested and restarts on boot… have to delete the MagicMirror folder again if u go this way
-
-
@thomaslc sure… and the output of
pm2 logs --lines=100my email is the same userid as here on gmail…
and there is some startup problem… cause pm2 thinks the mirror is running,
and then u do npm start AGAIN… but you should get output some output… -
@sdetweil Yesterday I installed pi 3 B + on the raspberry, it was installed without problems.
-
@bobwilliams thanks… your original problem was with update, which is where i see a problem i need to correct
-
@sdetweil on pi zero also decided … so everything is in order …
-
@bobwilliams yes, install is good… update still has a problem…
-
@sdetweil thank you for your hard work
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login