Read the statement by Michael Teeuw here.
MagicMirror stopped working after screensaver installed
-
I installed
apt-get install xscreensaver -
@demetry07 ok… that should not have affected the mirror in any way…
-
I agree but that was all I did.
Installed then disabled making the screen go blank then sudo reboot.After reboot I get the error I posted above.
-
-
That fixed it thank you.
-
@demetry07 for the future, I have a script as part of install to disable screensaver on a lot of systems…
its also in the installers folder with 2.10screensaveroff.sh -
@sdetweil When I ran the install it asked me if I wanted to disable screensaver and I said yes but my screen was still going black over night. I would have to CTRL-Q out then it would run again automatically after a few seconds. Thought installing the screensaver and disabling it would help. Will see after tonight.
-
I spoke to soon. This morning it stopped working again.
I ran
npm install
then
sudo reboot
then cd ~/MagicMirror
then
npm start
Here are the results
pi@raspberrypi:~/MagicMirror $ npm startmagicmirror@2.10.0 start /home/pi/MagicMirror
./run-start.sh[11:35:13.428] [LOG] Starting MagicMirror: v2.10.0
[11:35:13.448] [LOG] Loading config …
[11:35:13.463] [LOG] Loading module helpers …
[11:35:13.466] [LOG] No helper found for module: alert.
[11:35:13.594] [LOG] Initializing new module helper …
[11:35:13.596] [LOG] Module helper loaded: updatenotification
[11:35:13.597] [LOG] No helper found for module: clock.
[11:35:13.599] [LOG] No helper found for module: currentweather.
/home/pi/MagicMirror/node_modules/electron/dist/electron js/electron.js: symbol lookup error: /home/pi/MagicMirror/modules/MMM-PIR/node_modules/epoll/build/Release/epoll.node: undefined symbol: _ZN2v816FunctionTemplate3NewEPNS_7IsolateEPFvRKNS_20FunctionCallbackInfoINS_5ValueEEEENS_5LocalIS4_EENSA_INS_9SignatureEEEiNS_19ConstructorBehaviorENS_14SideEffectTypeE
npm ERR! code ELIFECYCLE
npm ERR! syscall spawn
npm ERR! file sh
npm ERR! errno ENOENT
npm ERR! magicmirror@2.10.0 start:./run-start.sh
npm ERR! spawn ENOENT
npm ERR!
npm ERR! Failed at the magicmirror@2.10.0 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.npm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2020-01-07T17_35_13_737Z-debug.logI pulled the log file here is the data in the log file.
0 info it worked if it ends with ok
1 verbose cli [ ‘/usr/bin/node’, ‘/usr/bin/npm’, ‘start’ ]
2 info using npm@6.13.4
3 info using node@v10.18.0
4 verbose run-script [ ‘prestart’, ‘start’, ‘poststart’ ]
5 info lifecycle magicmirror@2.10.0~prestart: magicmirror@2.10.0
6 info lifecycle magicmirror@2.10.0~start: magicmirror@2.10.0
7 verbose lifecycle magicmirror@2.10.0~start: unsafe-perm in lifecycle true
8 verbose lifecycle magicmirror@2.10.0~start: PATH: /usr/lib/node_modules/npm/node_modules/npm-lifecycle/node-gyp-bin:/home/pi/MagicMirror/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
9 verbose lifecycle magicmirror@2.10.0~start: CWD: /home/pi/MagicMirror
10 silly lifecycle magicmirror@2.10.0~start: Args: [ ‘-c’, ‘./run-start.sh’ ]
11 info lifecycle magicmirror@2.10.0~start: Failed to exec start script
12 verbose stack Error: magicmirror@2.10.0 start:./run-start.sh
12 verbose stack spawn ENOENT
12 verbose stack at ChildProcess. (/usr/lib/node_modules/npm/node_modules/npm-lifecycle/lib/spawn.js:48:18)
12 verbose stack at ChildProcess.emit (events.js:198:13)
12 verbose stack at maybeClose (internal/child_process.js:982:16)
12 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
13 verbose pkgid magicmirror@2.10.0
14 verbose cwd /home/pi/MagicMirror
15 verbose Linux 4.19.75-v7+
16 verbose argv “/usr/bin/node” “/usr/bin/npm” “start”
17 verbose node v10.18.0
18 verbose npm v6.13.4
19 error code ELIFECYCLE
20 error syscall spawn
21 error file sh
22 error errno ENOENT
23 error magicmirror@2.10.0 start:./run-start.sh
23 error spawn ENOENT
24 error Failed at the magicmirror@2.10.0 start script.
24 error This is probably not a problem with npm. There is likely additional logging output above.
25 verbose exit [ 1, true ]Thoughts?
-
@demetry07 said in MagicMirror stopped working after screensaver installed:
home/pi/MagicMirror/modules/MMM-PIR/node_modules/epoll/build/Release/epoll.node: undefined symbol
fun times!!
do
cd ~/MagicMirror npm install electron-rebuild node_modules/.bin/electron-rebuild -
Ran the suggested commands see below. Looks like they both ran just fine.
pi@raspberrypi:~/MagicMirror $ npm install electron-rebuild
- electron-rebuild@1.8.8
added 68 packages from 42 contributors and audited 3926 packages in 124.52s
16 packages are looking for funding
runnpm fundfor detailsfound 0 vulnerabilities
pi@raspberrypi:~/MagicMirror $ node_modules/.bin/electron-rebuild
✔ Rebuild Complete
pi@raspberrypi:~/MagicMirror $ npm startmagicmirror@2.10.0 start /home/pi/MagicMirror
./run-start.sh[11:51:32.453] [LOG] Starting MagicMirror: v2.10.0
[11:51:32.478] [LOG] Loading config …
[11:51:32.491] [LOG] Loading module helpers …
[11:51:32.494] [LOG] No helper found for module: alert.
[11:51:32.615] [LOG] Initializing new module helper …
[11:51:32.617] [LOG] Module helper loaded: updatenotification
[11:51:32.619] [LOG] No helper found for module: clock.
[11:51:32.620] [LOG] No helper found for module: currentweather.
/home/pi/MagicMirror/node_modules/electron/dist/electron js/electron.js: symbol lookup error: /home/pi/MagicMirror/modules/MMM-PIR/node_modules/epoll/build/Release/epoll.node: undefined symbol: _ZN2v816FunctionTemplate3NewEPNS_7IsolateEPFvRKNS_20FunctionCallbackInfoINS_5ValueEEEENS_5LocalIS4_EENSA_INS_9SignatureEEEiNS_19ConstructorBehaviorENS_14SideEffectTypeE
npm ERR! code ELIFECYCLE
npm ERR! syscall spawn
npm ERR! file sh
npm ERR! errno ENOENT
npm ERR! magicmirror@2.10.0 start:./run-start.sh
npm ERR! spawn ENOENT
npm ERR!
npm ERR! Failed at the magicmirror@2.10.0 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.npm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2020-01-07T17_51_32_806Z-debug.log
pi@raspberrypi:~/MagicMirror $ - electron-rebuild@1.8.8
-
@demetry07 ok, module is a pain in the butt…
cd modules/MMM-PIR
npm install
~/MagicMirror/node_modules/.bin/electron-rebuild -
Yeah I missed that in the log I see it now. Thanks for the help after updating that Module it’s starting again. Do you have a recommendation for a PIR Module that works better then something else?
-
@demetry07 no… sorry, none of the PIR modules play nice
-
Ok thank you again for helping.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login