Read the statement by Michael Teeuw here.
erro MMM-HASS
-
Much! Thanks so much for helping me out! I do not know what else to do. I will send everything here to you.
by message is not going./* Magic Mirror Config Sample * * By Michael Teeuw http://michaelteeuw.nl * MIT Licensed. * * For more information how you can configurate this file * See https://github.com/MichMich/MagicMirror#configuration * */ var config = { address: "localhost", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "", "0.0.0.0", "::" to listen on any interface // Default, when address config is left out, is "localhost" port: 8080, ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], language: "pt", timeFormat: 24, units: "metric", // serverOnly: true/false/"local" , // local for armv6l processors, default // starts serveronly and then starts chrome browser // false, default for all NON-armv6l devices // true, force serveronly mode, because you want to.. no UI on this device modules: [ { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: "calendar", header: "Feriados", position: "top_left", config: { calendars: [ { symbol: "calendar-check", url: "https://www.calendarlabs.com/ical-calendar/ics/37/Brazil_Holidays.ics" } ] } }, { module: "compliments", position: "lower_third" }, { module: "MMM-DarkSkyForecast", header: "Tempo em Duque de Caxias", position: "top_right", classes: "default everyone", disabled: false, config: { apikey: "****", latitude: "-22.787860", longitude: "-43.303140", iconset: "4c", units: "si", concise: false, forecastLayout: "table" } }, { module: 'MMM-Screencast', position: 'middle_center', // This position is for a hidden <div /> and not the screencast window config: { position: 'center', height: 300, width: 500, } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "Noticias R7", url: "https://noticias.r7.com/rio-de-janeiro/feed.xml" } ], showSourceTitle: true, showPublishDate: true, broadcastNewsFeeds: true, broadcastNewsUpdates: true } }, { module: "MMM-HASS", position: "middle_center", config: { host: "192.168.1.158", port: "8123", apipassword: "jeure3027", hassiotoken: false, https: false, devices: [ { deviceLabel: "Exterior", deviceReadings: [ { sensor: "sensor.disk_free", icon: "wi wi-thermometer", suffix: "%"} ] } ] } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") {module.exports = config;}
-
@iorifly I can recreate the failure, but if I remove the MMM-HASS module, it doesn’t fail…
debugging, but not sure yet…
if I run serverOnly mode and and access the system from a browser on another system, that browser doesn’t report any unexpected errors…pi0, raspian jessie,
node -v v10.17.0
npm -v 6.11.3MM 2.10.0
chromium-browser --version
Chromium 56.0.2924.84 Built on Ubuntu 14.04, running on Raspbian 8.0 -
@sdetweil said in erro MMM-HASS:
pi0, raspian jessie,
When I remove HASS it also works.
But I did not understand. You think there’s no way. Still debugging?
-
@iorifly yes, not home now. Will try to spend some time tomorrow
-
I look forward to something tomorrow. Thank you for not leaving me!
-
My exit when I request browser version
pi@raspberrypi:~/MagicMirror $ chromium-browser --version --disable-quic --enable-tcp-fast-open --ppapi-flash-path=/usr/lib/chromium-browser/libpepflashplayer.so --ppapi-flash-args=enable_stagevideo_auto=0 --ppapi-flash-version= Chromium 74.0.3729.157 Built on Raspbian , running on Raspbian 10
-
ok, i have found the problem… all my fault
edit ~/MagicMirror/run-start.sh
#exec 3< &- # edit this line and comment out with leading # tee < &3 & # add this line after the line above, no space between < and &3, forum is real trouble with <
-
guy!!
I’m not home at the moment BUT HOW HAPPY I am. Will I be able to use the module? I will return as soon as possible to you. THANK YOU FOR HELPING ME AND NOT ABANDONING THE BOAT.
-
@iorifly it is not a module problem, but a script problem…
the module runs, but I don’t know how it works, so that will be next work for you
-
@sdetweil said in erro MMM-HASS:
it is not a module problem, but a script problem…
the module runs, but I don’t know how it works, so that will be next work for youI understood. I will try to do it later! You don’t know how happy I am !!!
I can get MMM-hass + spotify to work and remove the update notice from the screen I will buy the glass.