Read the statement by Michael Teeuw here.
MMM-Fitbit2
-
@mattx38 As the client secret a password, it is blocked from printing. Just paste the secret into your terminal and press enter - it will work.
This is separate to what @bhepler raised re: SSH. Actually, you can run all of the commands over SSH, but you will need to log in to your Fitbit account in a browser on the Pi in order to generate your access tokens. Alternatively, you can run the script on another machine, generate the tokens and then transfer them onto the Pi (if you have no way to do things on your Pi’s display).
-
@Arno-Strasbourg
Seems like it’s possible to get a low-resolution status of device battery levels from the Fitbit API.
It also seems as though the Python library supports this endpoint.However, because it returns a list of devices, targeting the right one may prove to be a little more complicated.
Not much good if the battery level relates to a second tracker that you aren’t actually wearing!
I could possibly do it based on the device with"type": "TRACKER"that has the most recent"lastSyncTime", but I will need to think about it. -
@Vizulize said in MMM-Fitbit2:
@Arno-Strasbourg
Seems like it’s possible to get a low-resolution status of device battery levels from the Fitbit API.
It also seems as though the Python library supports this endpoint.
However, because it returns a list of devices, targeting the right one may prove to be a little more complicated.
Not much good if the battery level relates to a second tracker that you aren’t actually wearing!
I could possibly do it based on the device with “type”: “TRACKER” that has the most recent “lastSyncTime”, but I will need to think about it.It would be very nice. Thank you
-
I think this module is great! It works well and looks great.
Is there a way to set it to imperial instead of metric measurements? -
I have also noticed that the sleep time is inaccurate. It currently says 08:04, but the Fitbit website says 07:10. I am not sure why it is adding 56mins to my sleep time.
-
My question is…after updating MM
the module is not working.
I must do the (auth.sh) again after every MM upgrade.
Is that the same on your Mirrors?? -
Is there a way to use more than 1 Fitbit account? I tried but the second one would not authorize.
-
@aunrea For now, to get Imperial measurements, remove this line:
https://github.com/m-roberts/MMM-Fitbit2/blob/master/python/get_data.py#L96 -
@aunrea The module is returning the sleep data from the web API directly, which can be found here: https://dev.fitbit.com/build/reference/web-api/sleep/
You can see in the code here that the result that is returned is “totalMinutesAsleep”:
https://github.com/m-roberts/MMM-Fitbit2/blob/master/python/get_data.py#L194Beyond that, I am not sure why it is adding time to your records. Apologies!
-
@Stoffbeuteluwe This should not be the case. What are the logs saying?
-
@aunrea This should work - I have 2 accounts on my MagicMirror and they have worked together for some time. What are you seeing?
-
Hi, this module is great! It works almost perfectly, the only exception being inaccurate sleep time. Mine is underreporting my sleep time. Any ideas?
-
@mkufner24 I have explained what I am doing to retrieve sleep data in an earlier post. Beyond that, I’m not sure!
I’m glad to hear you’re enjoying the module though 😄
-
I have dockerized my MM (https://github.com/bastilimbach/docker-MagicMirror) and having trouble getting MMM-Fitbit2 to work properly.
Some things I’ve attempted:
- I cannot launch a web browser from my container; it doesn’t have one.
- SSHing into the container to launch auth.sh will not launch a web browser to finish the setup
- Copying the token from my old MM doesn’t seem to work.
Suggestions?
-
@Vizulize It would be great it you could allow the issue creation on GitHub, this will be easier to contribute and raise issue. :)
-
@aunrea I have the same behavior with a second account, like if some cache was used.
My workaround was to clone the repository on my laptop (not on my RPi) and run the Python script from there and then copy/paste the tokens-XXXXX.json file to my RPi. -
@mkufner24 Same, sleep time is inaccurate.
-
@goldyfruit said in MMM-Fitbit2:
@Vizulize It would be great it you could allow the issue creation on GitHub, this will be easier to contribute and raise issue. :)
Done!
-
@goldyfruit said in MMM-Fitbit2:
@mkufner24 Same, sleep time is inaccurate.
Unfortunately, this is what is returned from the Fitbit API. If you can figure out how to produce the data you want from what is returned from the API, then I am happy to take a look!
-
Is it possible to display weight in pounds instead of kg? If yes, how?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login