Read the statement by Michael Teeuw here.
mmm assistant mk2
-
@dvbit said in mmm assistant mk2:
HDMI
One little Step ahead.
Disabling Audio Output gives no audio feedback but then the mirrorr goes back into waiting state.
So it get’s stuck in “Spinning State” because the audio fails.
Maybe it’s obvious but I think it is interesting.and this from the log is also useful:
[2020-06-01 19:27:11.533] [LOG] [SNOWBOY] Retry restarting... [2020-06-01 19:27:13.588] [LOG] [LPCM16] WARN: arecord: main:828: audio open error: Device or resource busy [2020-06-01 19:27:13.589] [LOG] [SNOWBOY] Retry restarting...
So my audio ouput device is "owned " by some other process I guess
aplay -l gives:
pi@MagicMirror:~/MagicMirror $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3
-
-
@sdetweil nope I just grep my grep :-D
-
Hmmm sorry to go a bit off topic but has anyone tried the new Assistant2Display module with the new GoogleAssistant? I can’t get it to work but I suspect I am missing something very obvious. I just don’t know what.
I can’t get the screen, briefToday, or Pir to work. I don’t get any errors, just nothing happens.
Config file:
{ module: "MMM-GoogleAssistant", position: "fullscreen_above", config: { A2DServer: { useA2D: true, }, assistantConfig: { //latitude: 51.508530, //longitude: -0.076132, }, micConfig: { // put there configuration generated by auto-installer recorder: "arecord", device: "plughw:2", }, snowboy: { Model: "smart_mirror", }, } }, { module: "MMM-Assistant2Display", position: "top_left", config: { debug:true, }, pir: { usePir: true, pin: 4, reverseValue: false }, screen: { useScreen: true, delay: 1 * 60 * 1000, turnOffDisplay: true, ecoMode: true, displayCounter: true, text: "Auto Turn Off Screen:", detectorSleeping: false, governorSleeping: false, rpi4: false }, briefToday: { useBriefToday: true, welcome: "brief Today" }, },
I don’t see the debug working either? Nothing generated on the terminal while the mirror is running at least.
[2020-06-01 16:51:49.870] [LOG] [ASSISTANT] MMM-GoogleAssistant Version: 2.0.0 [2020-06-01 16:51:49.885] [LOG] [SNOWBOY] Model selected: smart_mirror [2020-06-01 16:51:49.893] [LOG] [SNOWBOY] snowboy v1.5.0 Initialized... [2020-06-01 16:51:49.902] [LOG] [ASSISTANT] Assistant2Display Server Started [2020-06-01 16:51:49.908] [LOG] [ASSISTANT] Google Assistant is initialized. [2020-06-01 16:51:49.916] [LOG] [A2D] MMM-Assistant2Display Version: 2.0.0 [2020-06-01 16:51:49.928] [LOG] [A2D] Assistant2Display is initialized.
Anyone see what I’m missing? I suspect it’s something super simple but I can’t figure out what.
-
well, I though i’d give it a try… see what all the fuss is about!
- on the install y/n prompts, the protocol is the Uppercased letter is the default, so whn you hit enter is does the default
it doesn’t do anything, have to enter Y or N (and then it takes off without waiting??) - audio doesn’t work for me…
and none of the choices match the system config (and none of them work)
system config, sounds fine, music, web sounds, system sounds.
aplay -l info
- on the install y/n prompts, the protocol is the Uppercased letter is the default, so whn you hit enter is does the default
-
A big thank You to @Bugsounet for his help in troubleshooting.
It was nothing to do with the modules but with my asoundrc config.
the ouput card/device were not correct.
Thanks again! -
@dvbit: no problem ! with pleasure ;)
-
@reddyman : turn on modules. just YouTube by default is turn on
link / photo is disabled by defaultconfig: { debug:true, // make you config there ! }, // not there ....
-
@Bugsounet said in mmm assistant mk2:
config: { debug:true, // make you config there ! }, // not there ....
…I am an idiot. Hahaha, I knew it was something super simple. Smh, thanks for putting up with idiots like me :p
-
@reddyman : don’t worry, it’s arrive to me too sometime !