mmm assistant mk2

[dvbit]

@Bugsounet So I have "Output Device Settings " item greyed out in desktop sound menu.
entries:

• Analog
• HDMI
• USB Kinect Audio
• Output Audio Device Settings : Greyed out

Edit:
Before sending Firmware to Kinect after boot (to enable it) the Ouput Device Settings Option is NOT there (also no Kinect Audio available)
After sending it both Kinect and Output Deive Settings Appear

trying to play the response using cvlc works but there is a PulseAudio error:

VLC media player 3.0.8 Vetinari (revision 3.0.8-0-gf350b6b5a7)
[01cb1d60] vlcpulse audio output error: PulseAudio server connection failure: Connection refused
[01cd0fc8] dummy interface: using the dummy interface module...

Now rebooting and trying the plugin without uploading kinect audio firmware.

By the way the Pulseaudio refuse seems to me consistent with the failed audio for the plugin

DOH! I cannot try the plugin without the kinect audio firmware pushed (no other mic is attacched)

[dvbit]

@dvbit said in mmm assistant mk2:

HDMI

One little Step ahead.
Disabling Audio Output gives no audio feedback but then the mirrorr goes back into waiting state.
So it get’s stuck in “Spinning State” because the audio fails.
Maybe it’s obvious but I think it is interesting.

and this from the log is also useful:

[2020-06-01 19:27:11.533] [LOG]    [SNOWBOY] Retry restarting...
[2020-06-01 19:27:13.588] [LOG]    [LPCM16] WARN: arecord: main:828: audio open error: Device or resource busy

[2020-06-01 19:27:13.589] [LOG]    [SNOWBOY] Retry restarting...

So my audio ouput device is "owned " by some other process I guess

aplay -l gives:

pi@MagicMirror:~/MagicMirror $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1]
  Subdevices: 4/4
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones]
  Subdevices: 4/4
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3

[sdetweil]

@dvbit do

ps -ef | grep aplay

and see if its still running…

[dvbit]

@sdetweil nope I just grep my grep :-D

[reddyman]

Hmmm sorry to go a bit off topic but has anyone tried the new Assistant2Display module with the new GoogleAssistant? I can’t get it to work but I suspect I am missing something very obvious. I just don’t know what.

I can’t get the screen, briefToday, or Pir to work. I don’t get any errors, just nothing happens.

Config file:

{
  module: "MMM-GoogleAssistant",
  position: "fullscreen_above",
  config: {
   A2DServer: {
      useA2D: true,
      }, 
    assistantConfig: {
      //latitude: 51.508530,
      //longitude: -0.076132,
      },
    micConfig: { // put there configuration generated by auto-installer
      recorder: "arecord",
      device: "plughw:2",
      },
    snowboy: {
      Model: "smart_mirror", 	
	},
    }
},
{
  module: "MMM-Assistant2Display",
  position: "top_left",
  config: {
    debug:true,
  },
  pir: {
      usePir: true,
      pin: 4,
      reverseValue: false
  },
  screen: {
  useScreen: true,
  delay: 1 * 60 * 1000,
  turnOffDisplay: true,
  ecoMode: true,
  displayCounter: true,
  text: "Auto Turn Off Screen:",
  detectorSleeping: false,
  governorSleeping: false,
  rpi4: false
},

briefToday: {
      useBriefToday: true,
      welcome: "brief Today"
    },

},

I don’t see the debug working either? Nothing generated on the terminal while the mirror is running at least.

[2020-06-01 16:51:49.870] [LOG]    [ASSISTANT] MMM-GoogleAssistant Version: 2.0.0
[2020-06-01 16:51:49.885] [LOG]    [SNOWBOY] Model selected: smart_mirror
[2020-06-01 16:51:49.893] [LOG]    [SNOWBOY] snowboy v1.5.0 Initialized...
[2020-06-01 16:51:49.902] [LOG]    [ASSISTANT] Assistant2Display Server Started
[2020-06-01 16:51:49.908] [LOG]    [ASSISTANT] Google Assistant is initialized.
[2020-06-01 16:51:49.916] [LOG]    [A2D] MMM-Assistant2Display Version: 2.0.0
[2020-06-01 16:51:49.928] [LOG]    [A2D] Assistant2Display is initialized.

Anyone see what I’m missing? I suspect it’s something super simple but I can’t figure out what.

[sdetweil]

well, I though i’d give it a try… see what all the fuss is about!

1. on the install y/n prompts, the protocol is the Uppercased letter is the default, so whn you hit enter is does the default
   it doesn’t do anything, have to enter Y or N (and then it takes off without waiting??)
2. audio doesn’t work for me…
   and none of the choices match the system config (and none of them work)
   system config, sounds fine, music, web sounds, system sounds.
   

aplay -l info

[dvbit]

A big thank You to @Bugsounet for his help in troubleshooting.
It was nothing to do with the modules but with my asoundrc config.
the ouput card/device were not correct.
Thanks again!

[A Former User]

@dvbit: no problem ! with pleasure ;)

[A Former User]

@reddyman : turn on modules. just YouTube by default is turn on
link / photo is disabled by default

 config: {
    debug:true,
    // make you config there !
  },
 // not there
....

[reddyman]

@Bugsounet said in mmm assistant mk2:

 config: {
    debug:true,
    // make you config there !
  },
 // not there
....

…I am an idiot. Hahaha, I knew it was something super simple. Smh, thanks for putting up with idiots like me :p