MMM-Tado wrong units

sdetweil

@Stoffbeuteluwe what is your main config.js units set to? up near address:

Stoffbeuteluwe

@sdetweil it is metric

sdetweil

@Stoffbeuteluwe so, the original code should have worked…

Stoffbeuteluwe

@sdetweil without your fix it does not work in my case

sdetweil

@Stoffbeuteluwe hmm…

can u share the top of your config.js, before the modules:[ line

thanks

Stoffbeuteluwe

@sdetweil Hello, after module update same problem
and your fix don’t work anymore…can you help me again?

var config = {
	address: "0.0.0.0", // Address to listen on, can be:
	                      // - "0.0.0.0", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "0.0.0.0"
	port: 8080,
	ipWhitelist: [], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "de",
	timeFormat: 24,
	units: "metric",

	modules: [

sdetweil

@Stoffbeuteluwe ok, need an editor for this…

line 26 of MMM-Tado.js, leave alone

change all the other this.config.units to self.config.units

change them all, then change line 26 back to this.

I have opened issue 11
https://github.com/WouterEekhout/MMM-Tado/issues/11

Stoffbeuteluwe

@sdetweil no luck…sorry, I have changed 4x this into self
but I am not sure with the line 26

/**
 * Created by Wouter Eekhout on 06/01/2017.
 */
Module.register("MMM-Tado", {
    // Default module config.
    defaults: {
        username: '',
        password: '',
        updateInterval: 300000,
    },

    tadoMe: {},
    tadoHomes: [],

    getStyles: function () {
        return [
            this.file('css/MMM-Tado.css'),
        ];
    },

    start: function () {
        if (this.config.updateInterval < this.defaults.updateInterval){
            this.config.updateInterval = this.defaults.updateInterval;
        }

        this.config.units = self.config.units;
        this.sendSocketNotification('CONFIG', this.config);
    },

    // Override dom generator.
    getDom: function () {
        let self = this;
        let wrapper = document.createElement("div");
        wrapper.className = "tado-info";

        this.tadoHomes.forEach(home => {
            let homeWrapper = document.createElement("div");
            homeWrapper.className = "tado-home";

            let logoWrapper = document.createElement("i");
            logoWrapper.className = "tado-icon-tado_logo tado-logo";
            homeWrapper.appendChild(logoWrapper);

            let tableWrapper = document.createElement("table");
            tableWrapper.className = "tado-table small";

            home.zones.forEach(zone => {
                let rowWrapper = document.createElement("tr");

                if (zone.type === "HOT_WATER") {
                    let firstTableDataWrapper = document.createElement("td");
                    firstTableDataWrapper.className = "tado-table-name";

                    let zoneNameWrapper = document.createElement("span");
                    zoneNameWrapper.innerText = zone.name;
                    firstTableDataWrapper.appendChild(zoneNameWrapper);
                    rowWrapper.appendChild(firstTableDataWrapper);

                    let secondTableDateWrapper = document.createElement("td");
                    secondTableDateWrapper.className = "tado-table-data";

                    let temperatureWrapper = document.createElement("span");
                    let temperatureIconWrapper = document.createElement("i");
                    temperatureIconWrapper.className = "fa fa-thermometer-half";
                    temperatureWrapper.appendChild(temperatureIconWrapper);
                    if (zone.state.setting.temperature == null) {
                        var temperatureTextWrapper = document.createTextNode(zone.state.setting.power);
                    } else {
                        if (self.config.units === "metric") {
                            var temperatureTextWrapper = document.createTextNode(zone.state.setting.temperature.celsius + "°");
                        } else {
                            var temperatureTextWrapper = document.createTextNode(zone.state.setting.temperature.fahrenheit + "°");
                        }
                    }
                    temperatureWrapper.appendChild(temperatureTextWrapper);
                    secondTableDateWrapper.appendChild(temperatureWrapper);

                    rowWrapper.appendChild(secondTableDateWrapper);
                }
                else if (zone.type === "HEATING") {
                    let firstTableDataWrapper = document.createElement("td");
                    firstTableDataWrapper.className = "tado-table-name";

                    let zoneNameWrapper = document.createElement("span");
                    zoneNameWrapper.innerText = zone.name;
                    firstTableDataWrapper.appendChild(zoneNameWrapper);
                    rowWrapper.appendChild(firstTableDataWrapper);

                    let secondTableDateWrapper = document.createElement("td");
                    secondTableDateWrapper.className = "tado-table-data";

                    //current temperature
                    let temperatureWrapper = document.createElement("span");
                    temperatureWrapper.className = "bright";
                    let temperatureIconWrapper = document.createElement("i");
                    temperatureIconWrapper.className = "fa fa-thermometer-half";
                    temperatureWrapper.appendChild(temperatureIconWrapper);
                    if (self.config.units === "metric") {
                        var temperatureTextWrapper = document.createTextNode(zone.state.sensorDataPoints.insideTemperature.celsius + "°");
                    } else {
                        var temperatureTextWrapper = document.createTextNode(zone.state.sensorDataPoints.insideTemperature.fahrenheit + "°");
                    }
                    temperatureWrapper.appendChild(temperatureTextWrapper);
                    if (zone.state.activityDataPoints.heatingPower.percentage > 0) {
                        //The zone is heating
                        let heatingWrapper = document.createElement("i");
                        heatingWrapper.className = "fa fa-fire bright";
                        temperatureWrapper.appendChild(heatingWrapper);
                    }
                    secondTableDateWrapper.appendChild(temperatureWrapper);

                    //target temperature
                    let temperatureTargetWrapper = document.createElement("span");
                    temperatureTargetWrapper.className = "xsmall";
                    let temperatureTargetIconWrapper = document.createElement("i");
                    temperatureTargetIconWrapper.className = "fa fa-thermometer-half";
                    temperatureTargetWrapper.appendChild(temperatureTargetIconWrapper);
                    if (zone.state.setting.temperature == null) {
                        var temperatureTargetTextWrapper = document.createTextNode(zone.state.setting.power);
                    } else {
                        if (self.config.units === "metric") {
                            var temperatureTargetTextWrapper = document.createTextNode(zone.state.setting.temperature.celsius + "°");
                        } else {
                            var temperatureTargetTextWrapper = document.createTextNode(zone.state.setting.temperature.fahrenheit + "°");
                        }
                    }
                    temperatureTargetWrapper.appendChild(temperatureTargetTextWrapper);
                    secondTableDateWrapper.appendChild(temperatureTargetWrapper);

                    let breakLine = document.createElement("br");
                    secondTableDateWrapper.appendChild(breakLine);

                    let humidityWrapper = document.createElement("span");
                    let humidityIconWrapper = document.createElement("i");
                    humidityIconWrapper.className = "fa fa-tint";
                    humidityWrapper.appendChild(humidityIconWrapper);
                    let humidityTextWrapper = document.createTextNode(zone.state.sensorDataPoints.humidity.percentage + "%");
                    humidityWrapper.appendChild(humidityTextWrapper);
                    secondTableDateWrapper.appendChild(humidityWrapper);

                    rowWrapper.appendChild(secondTableDateWrapper);
                }
                else if (zone.type === "AIR_CONDITIONING") {
                    let firstTableDataWrapper = document.createElement("td");
                    firstTableDataWrapper.className = "tado-table-name";

                    let zoneNameWrapper = document.createElement("span");
                    zoneNameWrapper.innerText = zone.name;
                    firstTableDataWrapper.appendChild(zoneNameWrapper);
                    rowWrapper.appendChild(firstTableDataWrapper);

                    let secondTableDateWrapper = document.createElement("td");
                    secondTableDateWrapper.className = "tado-table-data";

                    //current temperature
                    let temperatureWrapper = document.createElement("span");
                    temperatureWrapper.className = "bright";
                    let temperatureIconWrapper = document.createElement("i");
                    temperatureIconWrapper.className = "fa fa-thermometer-half";
                    temperatureWrapper.appendChild(temperatureIconWrapper);
                    if (self.config.units === "metric") {
                        var temperatureTextWrapper = document.createTextNode(zone.state.sensorDataPoints.insideTemperature.celsius + "°");
                    } else {
                        var temperatureTextWrapper = document.createTextNode(zone.state.sensorDataPoints.insideTemperature.fahrenheit + "°");
                    }
                    temperatureWrapper.appendChild(temperatureTextWrapper);
                    if (zone.state.setting.mode === "HEAT") {
                        //The zone is heating
                        let heatingWrapper = document.createElement("i");
                        heatingWrapper.className = "fa fa-fire bright";
                        temperatureWrapper.appendChild(heatingWrapper);
                    }
                    else if (zone.state.setting.mode === "COOL") {
                        //The zone is cooling
                        let coolingWrapper = document.createElement("i");
                        coolingWrapper.className = "fa fa-snowflake bright";
                        temperatureWrapper.appendChild(coolingWrapper);
                    }
                    secondTableDateWrapper.appendChild(temperatureWrapper);

                    //target temperature
                    let temperatureTargetWrapper = document.createElement("span");
                    temperatureTargetWrapper.className = "xsmall";
                    let temperatureTargetIconWrapper = document.createElement("i");
                    temperatureTargetIconWrapper.className = "fa fa-thermometer-half";
                    temperatureTargetWrapper.appendChild(temperatureTargetIconWrapper);
                    if (zone.state.setting.temperature == null) {
                        var temperatureTargetTextWrapper = document.createTextNode(zone.state.setting.power);
                    } else {
                        if (self.config.units === "metric") {
                            var temperatureTargetTextWrapper = document.createTextNode(zone.state.setting.temperature.celsius + "°");
                        } else {
                            var temperatureTargetTextWrapper = document.createTextNode(zone.state.setting.temperature.fahrenheit + "°");
                        }
                    }
                    temperatureTargetWrapper.appendChild(temperatureTargetTextWrapper);
                    secondTableDateWrapper.appendChild(temperatureTargetWrapper);

                    let breakLine = document.createElement("br");
                    secondTableDateWrapper.appendChild(breakLine);

                    let humidityWrapper = document.createElement("span");
                    let humidityIconWrapper = document.createElement("i");
                    humidityIconWrapper.className = "fa fa-tint";
                    humidityWrapper.appendChild(humidityIconWrapper);
                    let humidityTextWrapper = document.createTextNode(zone.state.sensorDataPoints.humidity.percentage + "%");
                    humidityWrapper.appendChild(humidityTextWrapper);
                    secondTableDateWrapper.appendChild(humidityWrapper);

                    rowWrapper.appendChild(secondTableDateWrapper);
                } else {
                    //don't add it
                    return;
                }

                tableWrapper.appendChild(rowWrapper);
            });

            homeWrapper.appendChild(tableWrapper);
            wrapper.appendChild(homeWrapper);
        });
        return wrapper;
    },

    socketNotificationReceived: function(notification, payload) {
        if (notification === 'NEW_DATA') {
            this.tadoMe = payload.tadoMe;
            this.tadoHomes = payload.tadoHomes;
            this.updateDom();
        }
    }
});

sdetweil

@Stoffbeuteluwe weird… i’ll be back on in about 6 hours, do you know how to use the debugger?
ctrl-shift-i on teh keyboard, select the sources tab, navigate the left tree to find the module and filename, click
shows in middle window

scroll down to one of the if (self.config.units lines (make sure u have that type unit in the tado data)
click the number on the start of the line, it should turn blue

hit refresh

the code will stop there
mouse over the self and a box will pop up showing what self points to, then config
same… units should say metric

sdetweil

@Stoffbeuteluwe said in MMM-Tado wrong units:

but I am not sure with the line 26

nothing… it will copy the system units to the module units info