MagicMirror² v2.13.0 is available! For more information about this release, check out this topic.

MM2 shows only Time (worked some minutes ago)



  • Hello there,

    i was installing Mm2 today and tried out some modules.
    All was working fine (except Octoprint Stream) and then from one minute to the other all modules were hidden or not shown on the screen except the clock with date

    Here you can see my config.js (also resetted again and after putting in a new module same error as above)
    What am i doing wrong or where is the mistake?

    also if i start “npm install” then a lot of errors appear

    /* Magic Mirror Config Sample
     *
     * By Michael Teeuw https://michaelteeuw.nl
     * MIT Licensed.
     *
     * For more information on how you can configure this file
     * See https://github.com/MichMich/MagicMirror#configuration
     *
     */
    
    var config = {
    	address: "localhost", 	// Address to listen on, can be:
    							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
    							// - another specific IPv4/6 to listen on a specific interface
    							// - "0.0.0.0", "::" to listen on any interface
    							// Default, when address config is left out or empty, is "localhost"
    	port: 8080,
    	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
    					// you must set the sub path here. basePath must end with a /
    	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
    															// or add a specific IPv4 of 192.168.1.5 :
    															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
    															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
    															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],
    
    	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
    	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
    	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true
    
    	language: "en",
    	logLevel: ["INFO", "LOG", "WARN", "ERROR"],
    	timeFormat: 24,
    	units: "metric",
    	// serverOnly:  true/false/"local" ,
    	// local for armv6l processors, default
    	//   starts serveronly and then starts chrome browser
    	// false, default for all NON-armv6l devices
    	// true, force serveronly mode, because you want to.. no UI on this device
    
    	modules: [
    		{
    			module: "alert",
    		},
    		{
    			module: "updatenotification",
    			position: "top_bar"
    		},
    		{
    			module: "clock",
    			position: "top_left"
    		},
    		{
    			module: "compliments",
    			position: "middle-center"
    		},
    		{
    			module: "currentweather",
    			position: "top_right",
    			config: {
    				location: "Schwäbisch Hall",
    				locationID: "2835481", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
    				appid: "700d5aff6db1410f7ab49da88d0933b8"
    			}
    		},
    		{
    			module: "weatherforecast",
    			position: "top_right",
    			header: "Wetter Vorschau",
    			config: {
    				location: "Schwäbisch Hall",
    				locationID: "2835481", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
    				appid: "700d5aff6db1410f7ab49da88d0933b8"
    			}
    		},
    		{
    			module: "newsfeed",
    			position: "bottom_bar",
    			config: {
    				feeds: [
    					{
    						title: "New York Times",
    						url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml"
    					}
    				],
    				showSourceTitle: true,
    				showPublishDate: true,
    				broadcastNewsFeeds: true,
    				broadcastNewsUpdates: true
    			}
    		},
            {
                    module: "MMM-Fuel",
                    position: "top_left",
                    config: {
                        api_key: "d5b40c42-68d4-3767-d7ac-c118ba7a169a",
                        lat: 49.099680,
                        lng: 9.837190,
                        types: ["e5", "diesel"],
                        sortby: "e5",
                        radius: 10,
                        max: 5,
                        rotateInterval: 120000,
                        updateInterval: 900000
            
                }
            },
            {
                        module: "MMM-Todoist",
                        position: "bottom_right",   // This can be any of the regions. Best results in left or right regions.
                        header: "Todo-Liste", // This is optional
                        config: { // See 'Configuration options' for more information.
                            hideWhenEmpty: true,
                            accessToken: "55fa7b89de14c3d232890748370f2a9c2f296ce5",
                            maximumEntries: 60,
                            updateInterval: 10*60*1000, // Update every 10 minutes
                            fade: false,      
                                // projects and/or labels is mandatory:
                            projects: [ 2239986494 ], 
                            labels: [ "noch zu erledigen" ] // Tasks for any projects with these labels will be shown.
                }
            },
    
    	]
    };
    
    /*************** DO NOT EDIT THE LINE BELOW ***************/
    if (typeof module !== "undefined") {module.exports = config;}
    

  • Project Sponsor

    @ZebAztian Any reason you have the following in you config?
    useHttps: false, // Support HTTPS or not, default "false" will use HTTP httpsPrivateKey: "", // HTTPS private key path, only require when useHttps is true httpsCertificate: "", // HTTPS Certificate path, only require when useHttps is true



  • @mumblebaj that was added to the default config in. 2.12


Log in to reply