Read the statement by Michael Teeuw here.
MMM-bergfex not working
-
@MajorC black screen, do this
open the developers console, ctrl-shift-i on the mirror keyboard
select the console tab
and scroll up to see any errors, usually red textu can also filter messages for specific modules by putting part of the module name in the filter field, ‘berg’ for example here
-
I can open the developers console without mmm-bergfex in the config and will see a couple of entries, no errors.
As soon as I include mmm-bergfex in the config, the developers console says: DevTool was disconnected from the page. Once page is reloaded, DevTools will automatically reconnect.
-
@MajorC ok, look in the window where you start MM, npm start or pm2 ,
if pm2 the pm2 logs --lines=???
where ??? is a number, 15 is the defaultto get to the window if MM is showing, alt-spacebar, n
-
/home/pi/.pm2/logs/MagicMirror-error.log last 15 lines: 0|MagicMir | at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-bergfex/node_helper.js:11:13) 0|MagicMir | at Module._compile (internal/modules/cjs/loader.js:786:30) 0|MagicMir | at Object.Module._extensions..js (internal/modules/cjs/loader.js:798:10) 0|MagicMir | at Module.load (internal/modules/cjs/loader.js:645:32) { 0|MagicMir | code: 'MODULE_NOT_FOUND', 0|MagicMir | requireStack: [ 0|MagicMir | '/home/pi/MagicMirror/modules/MMM-bergfex/node_helper.js', 0|MagicMir | '/home/pi/MagicMirror/js/app.js', 0|MagicMir | '/home/pi/MagicMirror/js/electron.js', 0|MagicMir | '/home/pi/MagicMirror/node_modules/electron/dist/resources/default_app.asar/main.js', 0|MagicMir | undefined 0|MagicMir | ] 0|MagicMir | } 0|MagicMir | [2020-09-27 17:30:56.629] [ERROR] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? 0|MagicMir | [2020-09-27 17:30:56.630] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues -
@MajorC looks like you didn’t do the npm install in the module folder after cloning
-
pi@MagicMirror:~/MagicMirror/modules/MMM-bergfex $ npm install cheerio npm WARN MMM-bergfex@ license should be a valid SPDX license expression + cheerio@1.0.0-rc.3 updated 1 package and audited 65 packages in 5.877s 2 packages are looking for funding run `npm fund` for details found 0 vulnerabilities pi@MagicMirror:~/MagicMirror/modules/MMM-bergfex $ npm install npm WARN MMM-bergfex@ license should be a valid SPDX license expression audited 65 packages in 2.257s 2 packages are looking for funding run `npm fund` for details found 0 vulnerabilities pi@MagicMirror:~/MagicMirror/modules/MMM-bergfex $I just did it again, but I am quite sure I already did it before.
-
@MajorC sadly he didn’t update package.json with all the required modules
do
npm install async --save
npm install sys – savehis code
var async = require('async'); var sys = require('sys'); var exec = require('child_process').exec; const request = require('request'); const cheerio = require("cheerio"); -
@sdetweil said in MMM-bergfex not working:
npm install async --save
npm install sys – savein the MMM-bergfex folder?
-
@MajorC of course
-
sorry, I am totaly new to this world, my first Raspberry project.
pi@MagicMirror:~/MagicMirror/modules/MMM-bergfex $ npm install async --save npm WARN MMM-bergfex@ license should be a valid SPDX license expression + async@3.2.0 added 1 package from 1 contributor and audited 66 packages in 2.709s 2 packages are looking for funding run `npm fund` for details found 0 vulnerabilities pi@MagicMirror:~/MagicMirror/modules/MMM-bergfex $ npm install sys -- save npm WARN MMM-bergfex@ license should be a valid SPDX license expression + sys@0.0.1 + save@2.4.0 added 13 packages from 11 contributors and audited 79 packages in 8.763s 2 packages are looking for funding run `npm fund` for details found 0 vulnerabilities pi@MagicMirror:~/MagicMirror/modules/MMM-bergfex $ -
@MajorC and then start mm
-
well, I have my mirror back, including Bergfex Snow Report. At the moment there is only “loading…” visible.
I will double check my config.
Maybe you can include the help to the git? Would be nice to have it working as smooth as the rest in this wonderful project.
-
@MajorC he hasn’t updated in 2 years… so unlikely
-
And it is working.
This is important:
This is an array with strings of the skiareas to display. String must exactly match the name on http://www.bergfex.at/oesterreich/schneewerte/ -
@MajorC yes, precise config is required in each module. some don’t document well…
-
Thanks for your very fast help. Maybe someone will rewrite this MMM. Winter is coming!
-
Hi ,
sorry for bringing this up again. I also have the bergfex “loading…” issue. However, in the logs I can see the values are retrieved. They just don’t show in the mirror:
0|mm | 83 snow reports from bergfex.at retrieved. 0|mm | [2020-11-12 21:40:29.367] [LOG] searching for Koralpe 0|mm | [2020-11-12 21:40:29.369] [LOG] searching for Hintertuxer Gletscher / Hintertux 0|mm | [2020-11-12 21:40:29.370] [LOG] searching for Ischgl 0|mm | [2020-11-12 21:40:29.373] [LOG] searching for Obergurgl - Hochgurgl 0|mm | [2020-11-12 21:40:29.375] [LOG] searching for Seefeld/Rosshütte 0|mm | [2020-11-12 21:40:29.376] [LOG] searching for Sölden 0|mm | [2020-11-12 21:40:29.377] [LOG] searching for Stubaier Gletscher / Stubaital 0|mm | [2020-11-12 21:40:29.377] [LOG] 0|mm | [ 0|mm | null, 0|mm | { 0|mm | skiarea: 'Hintertuxer Gletscher / Hintertux', 0|mm | tal: '-', 0|mm | berg: '135 cm', 0|mm | neu: '-', 0|mm | lifte: '0', 0|mm | update: '' 0|mm | }, 0|mm | { 0|mm | skiarea: 'Ischgl', 0|mm | tal: '-', 0|mm | berg: '20 cm', 0|mm | neu: '-', 0|mm | lifte: '0', 0|mm | update: '' 0|mm | }, 0|mm | { 0|mm | skiarea: 'Obergurgl - Hochgurgl', 0|mm | tal: '-', 0|mm | berg: '75 cm', 0|mm | neu: '-', 0|mm | lifte: '0', 0|mm | update: '' 0|mm | }, 0|mm | null, 0|mm | { 0|mm | skiarea: 'Sölden', 0|mm | tal: '19 cm', 0|mm | berg: '72 cm', 0|mm | neu: '-', 0|mm | lifte: '0', 0|mm | update: '' 0|mm | }, 0|mm | { 0|mm | skiarea: 'Stubaier Gletscher / Stubaital', 0|mm | tal: '35 cm', 0|mm | berg: '110 cm', 0|mm | neu: '-', 0|mm | lifte: '0', 0|mm | update: '' 0|mm | } 0|mm | ]So the names of the resorts seem to be correct.
Any ideas on this one?thanks
Chris -
Argh… just 2 minutes after posting I found the issue:
I had 2 values “Koralpe” and “Seefeld/Rosshütte”, which were displayed in the log as NULL. Removing these entries made bergfex work…
Again, it was a typo ;)
thanks
Chris -
Hi all,
I’ve created a fork and did some updates to the code and config.
You can now select the country where bergfex should choose the values from.Feel free to test and let me know any feedback.
So far I can show multiple countries and their values… -
@FatTony123 can you explain how to use the fork? I am a total noob.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login