Auto power on and off

thgmirror

Yes, @BKeyport idea is highly recommended:-)

ember1205

I have a WiFi plug that switches the device on at a specific time in the morning.

I use a cron job entry to shut the Pi down at a specific time at night.

I have the WiFi plug turn off at a specific time at night, five minutes after the time I’ve configured the cron job to shut the Pi down.

There is also an IFTTT integration where you can have the shutdown script make a specific call to create a calendar entry on a Google calendar and IFTTT will pick up that entry and use it to trigger the power-off event for the plug. I used to do this until IFTTT changed their account structure and I’ve been moving away from using any of their integrations.

natebrown

@garbleflux
Thanks, so i want it to turn on at 6:30 every morning and turn off at 9 every night, If i copy and paste that into crontab -e, will that work? What is the exact code i need?

hamid

I did not test with there are motion detectors that turn on the screen when moving the front screen does not know how it works

https://www.swedx.se/product_info.php?cPath=137_12800030&products_id=1955

TJuTZu

You can use also MMM-ModuleScheduler with MMM-Remote-Control to turn monitor on/off if you don’t need to turn off the whole system.

It works similar to crontab

Here is example from my mirror configuration

   {
      module: 'MMM-Remote-Control'
      // uncomment the following line to show the URL of the remote control on the mirror
      // , position: 'bottom_left'
      // you can hide this module afterwards from the remote control itself
    },

   {
        module: 'MMM-ModuleScheduler',
        config: {
            notification_schedule: [
                // TURN THE MONITOR/SCREEN ON At 10:00
                {notification: 'REMOTE_ACTION', schedule: '00 10 * * *', payload: {action: "MONITORON"}},
                // TURN THE MONITOR/SCREEN OFF At 00:00 
                {notification: 'REMOTE_ACTION', schedule: '00 00 * * *', payload: {action: "MONITOROFF"}}
            ]
        }
   }

BKeyport

If you wanna go down that path, there’s MMM-Remote-Control, too.

rejas

@hamid you can use a standard webcam (like the pi cam or a playstation camera like I do) and my module https://github.com/rejas/MMM-MotionDetector to detect motion and turn your monitor off and on.

Socrates

@bkeyport said in Auto power on and off:

If you wanna go down that path, there’s MMM-Remote-Control, too.

I was looking at the option of turning off the monitor instead the rpi.
I have the MMM-Remote-Control installed, but i dont see a way to turn off the monitor automatically, there’s an option to turn on and off the monitor and it works well, but how do i automate it?

sdetweil

@socrates I use a webcam and turn off the monitor, motion turns it back on.
some use IR (PIR) sensors to detect people heat and turn on…

Socrates

@sdetweil Thank you. I have Home Assistant in place, the only gripe is that I wont have enough space between the mm frame and the outlet to shove another smart outlet. I guess i will need to replace the single gang smart outlet.