Homeassistant und Magic Mirror problem whith MQTT character string help

[droncho]

@MaXi-XCeL thx…I am editing the module again to see if I can find the key to everything, I write again when I have the solution … Greetings and thanks. :)

[droncho]

Solved !! YUHUU!!!

Thaks to bertdeelman (creator from this Module: MMM-MQTTfloorplan) its working !!!
link: https://github.com/DMailMan/MMM-MQTTfloorplan

in config.js

{
topic: ‘tele/espejo1/SENSOR’, // MQTT Topic name
label: ‘Temperature’, // Not displayed anywhere, but handy for you to know what you’re doing !
type: ‘label’,
jsonpointer: ‘/DHT11/Temperature’,
display: { left: 265, top: 90, prefix: “”, suffix: “°C”, decimals: 1 },
},

Modification in module MMM-MQTTfloorplan.js
.
.
123 this.updateDivForItem(
124 i,
125 value,
126 config);
.
…

Img…

[MaXi-XCeL]

Perfection! Nicely done! Big-ups for all the Pro’s supporting this awesome platform!
David

[droncho]

testing again and working !!!

[BriggTrim]

Hi…I’m not beyond any doubt which portion isn’t working, so to begin with off, get the MQTTBox installed. Then get that associated to your mqtt, and subscribe to cmnd/hallway/# to see in case you’ll get messages through on the mqtt. If not at that point it’s the mqtt setup, in case there’s , at that point it’s something in MM. You can moreover send MQTT commands throgh the MQTT Box straightforwardly to see on the off chance that the reflect responds to it.