Further personalization with Face-Reco

[Macboy]

That was a quick find. Thanks for the direction. I had put my list of compliments into the compliments.js file, not in the instance in config.js.

Edit - spoke too soon. If I try to move the compliments out of compliments.js (under the defaults) and into a config grouping as shown on the module use instructions in config.js not only does the mirror load up no longer using face recognition, but the compliments module shows as undefined. I’ll look into the forum use tools and see if I can figure out how to post the code here.

[Macboy]

This post is deleted!

[Macboy]

This post is deleted!

[JerryP]

@Macboy said in Further personalization with Face-Reco:

MMM-TweetsByTimelineOrList

Maybe i’t wise to remove the Ica url and your token licens code.
so now I can check you agenda.

[sdetweil]

@JerryP you are not following the doc.

module: "compliments",
classes:"......",
config:{
   compliments:{
       ....
    }
}

https://docs.magicmirror.builders/modules/compliments.html#configuration-options

[Macboy]

@JerryP

Haha! Good to know! Thanks for pointing that out to me. It’s a pretty dormant Twitter account but I guess one never knows how that could be used.

[Macboy]

@michmich @paviro

I’m unable to edit the posts above with my wife’s tokens because too much time has passed since I posted. Do one of you have the ability to either redact that portion of the code snippets (the TimelineOrList sections) in both posts above?

Possibly harmless to have that info out in public but someone could maliciously use her account for evil I guess. If the posts need to be removed that is okay as well. And if there is a method available to me to pull the posts or edit them I’m happy to do so - just let me know how. I’ll be more alert next time I start posting code. Funny enough I DID take a quick scan making sure I wasn’t posting SSIDs and passwords…haha

If anyone else knows how I can change that up just let me know.

[JerryP]

@sdetweil
??? WHATEVER… it’s not my account…

Luckily @macboy is getting the hint :) :)

[Macboy]

Just reposting the initial posts which I’ve deleted with the important info removed. (Thanks again for the heads up on what’s sensitive info and what’s not guys!)

------- Original post (in case anyone happens across this and doesn’t understand what my question/issue was) --------

With my compliments.js per below and my config.js also per below, the Face Reco works. I’ll post a second reply here showing how I tried to change both of these files.

Module.register("compliments", {
	// Module config defaults.
	defaults: {
		compliments: {
			anytime: ["Hey there, looking good!"],
			morning: ["Good morning!", "Enjoy your day!", "Attack today!"],
			afternoon: ["Hello, beauty!", "You look great!", "Looking good today!"],
			evening: ["You nailed the day!", "What a great day!", "Hi family!"],
			"....-01-01": ["Happy new year!"]
		},
		updateInterval: 80000,
		remoteFile: null,
		fadeSpeed: 4000,
		morningStartTime: 3,
		morningEndTime: 12,
		afternoonStartTime: 12,
		afternoonEndTime: 17,
		random: true,
		mockDate: null
	},

And my current config.js (the whole thing since I can’t figure out why it’s reverting to no Face Reco when I change it).

var config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"],
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
    module: 'MMM-Face-Reco-DNN',
    config: {
      // Logout 15 seconds after user was not detected any more
      // If they are detected within this period, the delay will start again
      logoutDelay: 15000,
      // How often the recognition starts in milliseconds
      // With a Raspberry Pi 3+ it works well every 2 seconds
      checkInterval: 2000,
      // Module set used for when there is no face detected ie no one is in front of the camera
      noFaceClass: 'noface',
      // Module set used for when there is an unknown/unrecognised face detected
      unknownClass: 'unknown',
      // Module set used for when there is a known/recognised face detected
      knownClass: 'known',
      // Module set used for strangers and if no user is detected
      defaultClass: 'default',
      // Set of modules which should be shown for any user ie when there is any face detected
      everyoneClass: 'everyone',
      // Set of modules that are always shown - show if there is a face or no face detected
      alwaysClass: 'always',
      // XML to recognize with haarcascade
      cascade: 'modules/MMM-Face-Reco-DNN/tools/haarcascade_frontalface_default.xml',
      // Pre-encoded pickle with the faces
      encodings: 'modules/MMM-Face-Reco-DNN/tools/encodings.pickle',
      // Use Raspberry Pi camera or another type
      // 1 = RasPi camera, 0 = other camera
      usePiCamera: 1,
      // If using another type of camera, you can choose
      // i.e. 0 = /dev/video0 or 'http://link.to/live'
      source: 0,
      // Rotate camera
      rotateCamera: 0,
      // Method of facial recognition
      // dnn = deep neural network, haar = haarcascade
      method: 'dnn',
      // Which face detection model to use
      // "hog" is less accurate but faster on CPUs
      // "cnn" is a more accurate deep-learning model which is GPU/CUDA accelerated
      detectionMethod: 'hog',
      // How long in milliseconds modules take to hide and show
      animationSpeed: 0,
      // Path to Python to run the face recognition
      // null or '' means default path
      pythonPath: null,
      // Should a welcome message be shown using the MagicMirror alerts module?
      welcomeMessage: true,
      // Capture new pictures of recognized people, if unknown we save it in folder "unknown"
      // So you can extend your dataset and retrain it afterwards for better recognitions
      extendDataset: false,
      // If extendDataset is true, you need to set the full path of the dataset
      dataset: 'modules/MMM-Face-Reco-DNN/dataset/',
      // How much distance between faces to consider it a match. Lower is more strict.
      tolerance: 0.6,
      // allow multiple concurrent user logins, 0=no, any other number is the maximum number of concurrent logins
      multiUser: 0,
    }
},
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left",
			classes: 'always'
		},
		{
			module: "calendar",
			header: "Coming Up...",
			position: "top_left",
			classes: 'anna julia kathy kelly',
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "https://"					}
				]
			}
		},

		{
			module: "compliments",
			position: "lower_third",
			classes: 'kelly'
		},

		{
			module: "currentweather",
			position: "top_right",
			classes: 'anna julia kathy kelly',
			config: {
				location: "Sherwood Park",
				locationID: "5946768", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "71ddee6bbdcfb25b97866519bc4a52bc"
			}
		},
	{
		module: "MMM-weatherforecast",
		position: "top_right",	// This can be any of the regions.
					// Best results in bottom_bar region due to horizontal default layout and icon sizes.

			classes: 'anna julia kathy kelly',
		config: {
			// See 'Configuration options' for more information.
			location: "Sherwood Park",
			locationID: "5946768", //Location ID from http://openweathermap.org/help/city_list.txt
			appid: "71ddee6bbdcfb25b97866519bc4a52bc" //openweathermap.org API key.
		}
	},
		{
			module: "newsfeed",
			position: "bottom_bar",
			classes: 'anna julia',
			config: {
				feeds: [
					{
						title: "According to CBC",
						url: "https://rss.cbc.ca/lineup/canada-edmonton.xml"
					},
										{
						title: "Upcoming Family Opportunities",
						url: "https://www.raisingedmonton.com/feed/"
					}
									],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
			{
		module: 'MMM-TweetsByTimelineOrList',
		position: 'bottom_right',
		classes: 'kathy kelly',
		config: {
		// visit the url below for the twitter keys/tokens
		// https://dev.twitter.com/oauth/overview/application-owner-access-tokens
			consumer_key: 'XXXXX',
			consumer_secret: 'XXXXX',
			access_token_key: 'XXXXX',
			access_token_secret: 'XXXXX',
		// set the username and either timeline or listname
	        screenName: 'XXXXXXXXXXX',
	        listToShow: 'TIMELINE',
		}
	},
	{
            module: 'default/MMM-Dad-Jokes',
            position: 'bottom_bar', // Or wherever you want

		classes: 'anna julia',
            config: {
                updateInterval: 600000,
                fadeSpeed: 4000
            }
        },
		{
    module: 'default/MMM-ATM',
    position: 'bottom_bar',              // Works well anywhere
	classes: 'anna julia',
    config: {
	multipleChoice: "Yes",        // No = just the ? then the answer
	useHeader: true,              // true if you want a header
	header: "Feed your brain!",   // Any text you want
	maxWidth: "1250px",             // Stretch or constrain according to region
    }
}
	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[Macboy]

----- Original Post #2 ------

So I just removed the list of compliments from the compliments.js ‘defaults’ section and pasted the same to config.js as per below. First the new compliments.js

Module.register("compliments", {
	// Module config defaults.
	defaults: {
		updateInterval: 80000,
		remoteFile: null,
		fadeSpeed: 4000,
		morningStartTime: 3,
		morningEndTime: 12,
		afternoonStartTime: 12,
		afternoonEndTime: 17,
		random: true,
		mockDate: null
	},

And the new config.js which disables the Face Reco and shows the compliments as undefined when the mirror loads.

var config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"],
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
    module: 'MMM-Face-Reco-DNN',
    config: {
      // Logout 15 seconds after user was not detected any more
      // If they are detected within this period, the delay will start again
      logoutDelay: 15000,
      // How often the recognition starts in milliseconds
      // With a Raspberry Pi 3+ it works well every 2 seconds
      checkInterval: 2000,
      // Module set used for when there is no face detected ie no one is in front of the camera
      noFaceClass: 'noface',
      // Module set used for when there is an unknown/unrecognised face detected
      unknownClass: 'unknown',
      // Module set used for when there is a known/recognised face detected
      knownClass: 'known',
      // Module set used for strangers and if no user is detected
      defaultClass: 'default',
      // Set of modules which should be shown for any user ie when there is any face detected
      everyoneClass: 'everyone',
      // Set of modules that are always shown - show if there is a face or no face detected
      alwaysClass: 'always',
      // XML to recognize with haarcascade
      cascade: 'modules/MMM-Face-Reco-DNN/tools/haarcascade_frontalface_default.xml',
      // Pre-encoded pickle with the faces
      encodings: 'modules/MMM-Face-Reco-DNN/tools/encodings.pickle',
      // Use Raspberry Pi camera or another type
      // 1 = RasPi camera, 0 = other camera
      usePiCamera: 1,
      // If using another type of camera, you can choose
      // i.e. 0 = /dev/video0 or 'http://link.to/live'
      source: 0,
      // Rotate camera
      rotateCamera: 0,
      // Method of facial recognition
      // dnn = deep neural network, haar = haarcascade
      method: 'dnn',
      // Which face detection model to use
      // "hog" is less accurate but faster on CPUs
      // "cnn" is a more accurate deep-learning model which is GPU/CUDA accelerated
      detectionMethod: 'hog',
      // How long in milliseconds modules take to hide and show
      animationSpeed: 0,
      // Path to Python to run the face recognition
      // null or '' means default path
      pythonPath: null,
      // Should a welcome message be shown using the MagicMirror alerts module?
      welcomeMessage: true,
      // Capture new pictures of recognized people, if unknown we save it in folder "unknown"
      // So you can extend your dataset and retrain it afterwards for better recognitions
      extendDataset: false,
      // If extendDataset is true, you need to set the full path of the dataset
      dataset: 'modules/MMM-Face-Reco-DNN/dataset/',
      // How much distance between faces to consider it a match. Lower is more strict.
      tolerance: 0.6,
      // allow multiple concurrent user logins, 0=no, any other number is the maximum number of concurrent logins
      multiUser: 0,
    }
},
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left",
			classes: 'always'
		},
		{
			module: "calendar",
			header: "Coming Up...",
			position: "top_left",
			classes: 'anna julia kathy kelly',
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "https://"					}
				]
			}
		},

		{
			module: "compliments",
			position: "lower_third",
			classes: 'kelly',
			config: {
			anytime: ["Hey there, looking good!"],
			morning: ["Good morning!", "Enjoy your day!", "Attack today!"],
			afternoon: ["Hello, beauty!", "You look great!", "Looking good today!"],
			evening: ["You nailed the day!", "What a great day!", "Hi family!"],
			"....-01-01": ["Happy new year!"]
		}
		},

		{
			module: "currentweather",
			position: "top_right",
			classes: 'anna julia kathy kelly',
			config: {
				location: "Sherwood Park",
				locationID: "5946768", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "71ddee6bbdcfb25b97866519bc4a52bc"
			}
		},
	{
		module: "MMM-weatherforecast",
		position: "top_right",	// This can be any of the regions.
					// Best results in bottom_bar region due to horizontal default layout and icon sizes.

			classes: 'anna julia kathy kelly',
		config: {
			// See 'Configuration options' for more information.
			location: "Sherwood Park",
			locationID: "5946768", //Location ID from http://openweathermap.org/help/city_list.txt
			appid: "71ddee6bbdcfb25b97866519bc4a52bc" //openweathermap.org API key.
		}
	},
		{
			module: "newsfeed",
			position: "bottom_bar",
			classes: 'anna julia',
			config: {
				feeds: [
					{
						title: "According to CBC",
						url: "https://rss.cbc.ca/lineup/canada-edmonton.xml"
					},
										{
						title: "Upcoming Family Opportunities",
						url: "https://www.raisingedmonton.com/feed/"
					}
									],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
			{
		module: 'MMM-TweetsByTimelineOrList',
		position: 'bottom_right',
		classes: 'kathy kelly',
		config: {
		// visit the url below for the twitter keys/tokens
		// https://dev.twitter.com/oauth/overview/application-owner-access-tokens
			consumer_key: 'XXXXX',
			consumer_secret: 'XXXXX',
			access_token_key: 'XXXXX',
			access_token_secret: 'XXXXX',
		// set the username and either timeline or listname
	        screenName: 'XXXXXXXXXXX',
	        listToShow: 'TIMELINE',
		}
	},
	{
            module: 'default/MMM-Dad-Jokes',
            position: 'bottom_bar', // Or wherever you want

		classes: 'anna julia',
            config: {
                updateInterval: 600000,
                fadeSpeed: 4000
            }
        },
		{
    module: 'default/MMM-ATM',
    position: 'bottom_bar',              // Works well anywhere
	classes: 'anna julia',
    config: {
	multipleChoice: "Yes",        // No = just the ? then the answer
	useHeader: true,              // true if you want a header
	header: "Feed your brain!",   // Any text you want
	maxWidth: "1250px",             // Stretch or constrain according to region
    }
}
	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}