hello lucy

derick4963

hello lucy does not respond to the hotword that has been preconfig and i have confirm the mic and pseaker is working too.

Mykle1

@derick4963

errors?

derick4963

@mykle1

I am new to programing stuff and MM. Not sure if the below log useful.

Once i started MM, there is green color mic icon with command please then just a sec become white color mic icon with error

Below is the log
pi@raspberrypi:~/MagicMirror $ npm start dev

magicmirror@2.14.0 start /home/pi/MagicMirror
DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js “dev”

[19.02.2021 02:17.31.097] [LOG] Starting MagicMirror: v2.14.0
[19.02.2021 02:17.31.103] [LOG] Loading config …
[19.02.2021 02:17.31.109] [LOG] Loading module helpers …
[19.02.2021 02:17.31.111] [LOG] No helper found for module: MMM-ViewNotifications.
[19.02.2021 02:17.32.415] [LOG] Initializing new module helper …
[19.02.2021 02:17.32.416] [LOG] Module helper loaded: Hello-Lucy
[19.02.2021 02:17.32.418] [LOG] No helper found for module: alert.
[19.02.2021 02:17.32.554] [LOG] Initializing new module helper …
[19.02.2021 02:17.32.555] [LOG] Module helper loaded: updatenotification
[19.02.2021 02:17.32.557] [LOG] No helper found for module: clock.
[19.02.2021 02:17.32.905] [LOG] Initializing new module helper …
[19.02.2021 02:17.32.906] [LOG] Module helper loaded: calendar
[19.02.2021 02:17.32.906] [LOG] No helper found for module: compliments.
[19.02.2021 02:17.32.907] [LOG] No helper found for module: currentweather.
[19.02.2021 02:17.32.908] [LOG] No helper found for module: weatherforecast.
[19.02.2021 02:17.32.930] [LOG] Initializing new module helper …
[19.02.2021 02:17.32.930] [LOG] Module helper loaded: newsfeed
[19.02.2021 02:17.32.931] [LOG] All module helpers loaded.
[19.02.2021 02:17.33.031] [LOG] Starting server on port 8080 …
[19.02.2021 02:17.33.040] [WARN] You’re using a full whitelist configuration to allow for all IPs
[19.02.2021 02:17.33.050] [LOG] Server started …
[19.02.2021 02:17.33.051] [LOG] Connecting socket for: Hello-Lucy
[19.02.2021 02:17.33.052] [LOG] Starting module helper: Hello-Lucy
[19.02.2021 02:17.33.053] [LOG] Connecting socket for: updatenotification
[19.02.2021 02:17.33.054] [LOG] Connecting socket for: calendar
[19.02.2021 02:17.33.055] [LOG] Starting node helper for: calendar
[19.02.2021 02:17.33.056] [LOG] Connecting socket for: newsfeed
[19.02.2021 02:17.33.056] [LOG] Starting node helper for: newsfeed
[19.02.2021 02:17.33.057] [LOG] Sockets connected & modules started …
[19.02.2021 02:17.33.326] [ERROR] Whoops! There was an uncaught exception…
[19.02.2021 02:17.33.333] [ERROR] Error: listen EADDRINUSE: address already in use 127.0.0.1:8080
at Server.setupListenHandle [as _listen2] (net.js:1300:14)
at listenInCluster (net.js:1348:12)
at GetAddrInfoReqWrap.doListen [as callback] (net.js:1487:7)
at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:65:10) {
code: ‘EADDRINUSE’,
errno: ‘EADDRINUSE’,
syscall: ‘listen’,
address: ‘127.0.0.1’,
port: 8080
}
[19.02.2021 02:17.33.335] [ERROR] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[19.02.2021 02:17.33.335] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
[19.02.2021 02:17.33.353] [LOG] Launching application.
[19.02.2021 02:17.33.397] [WARN] (electron) The default value of app.allowRendererProcessReuse is deprecated, it is currently “false”. It will change to be “true” in Electron 9. For more information please check https://github.com/electron/electron/issues/18397
[19.02.2021 02:18.24.112] [LOG] Shutting down server…
[19.02.2021 02:18.24.117] [LOG] Stopping module helper: Hello-Lucy
[19.02.2021 02:18.24.118] [LOG] Stopping module helper: updatenotification
[19.02.2021 02:18.24.120] [LOG] Stopping module helper: calendar
[19.02.2021 02:18.24.122] [LOG] Stopping module helper: newsfeed

Mykle1

@derick4963 said in hello lucy:

EADDRINUSE

You have a conflict with port 8080 that needs to be resolved

sdetweil

@derick4963 maybe u have an instance running already w pm2

pm2 status
pm2 stop all

then try your npm start

derick4963

@sdetweil
@ Mykle1

I have reformat with clean MM with only Hello-lucy and default module but still getting white mic with ERROR.

pi@raspberrypi:~/MagicMirror $ npm start dev

magicmirror@2.14.0 start
DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js “dev”

[20.02.2021 15:27.50.505] [LOG] Starting MagicMirror: v2.14.0
[20.02.2021 15:27.50.511] [LOG] Loading config …
[20.02.2021 15:27.50.516] [LOG] Loading module helpers …
[20.02.2021 15:27.51.806] [LOG] Initializing new module helper …
[20.02.2021 15:27.51.808] [LOG] Module helper loaded: Hello-Lucy
[20.02.2021 15:27.51.810] [LOG] No helper found for module: alert.
[20.02.2021 15:27.51.925] [LOG] Initializing new module helper …
[20.02.2021 15:27.51.927] [LOG] Module helper loaded: updatenotification
[20.02.2021 15:27.51.928] [LOG] No helper found for module: clock.
[20.02.2021 15:27.52.265] [LOG] Initializing new module helper …
[20.02.2021 15:27.52.266] [LOG] Module helper loaded: calendar
[20.02.2021 15:27.52.266] [LOG] No helper found for module: compliments.
[20.02.2021 15:27.52.267] [LOG] No helper found for module: currentweather.
[20.02.2021 15:27.52.268] [LOG] No helper found for module: weatherforecast.
[20.02.2021 15:27.52.288] [LOG] Initializing new module helper …
[20.02.2021 15:27.52.289] [LOG] Module helper loaded: newsfeed
[20.02.2021 15:27.52.290] [LOG] All module helpers loaded.
[20.02.2021 15:27.52.367] [LOG] Starting server on port 8080 …
[20.02.2021 15:27.52.381] [LOG] Server started …
[20.02.2021 15:27.52.382] [LOG] Connecting socket for: Hello-Lucy
[20.02.2021 15:27.52.383] [LOG] Starting module helper: Hello-Lucy
[20.02.2021 15:27.52.384] [LOG] Connecting socket for: updatenotification
[20.02.2021 15:27.52.385] [LOG] Connecting socket for: calendar
[20.02.2021 15:27.52.386] [LOG] Starting node helper for: calendar
[20.02.2021 15:27.52.387] [LOG] Connecting socket for: newsfeed
[20.02.2021 15:27.52.388] [LOG] Starting node helper for: newsfeed
[20.02.2021 15:27.52.389] [LOG] Sockets connected & modules started …
[20.02.2021 15:27.52.656] [LOG] Launching application.
[20.02.2021 15:27.52.689] [WARN] (electron) The default value of app.allowRendererProcessReuse is deprecated, it is currently “false”. It will change to be “true” in Electron 9. For more information please check https://github.com/electron/electron/issues/18397
[20.02.2021 15:27.56.904] [LOG] Create new calendar fetcher for url: http://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics - Interval: 300000
[20.02.2021 15:27.57.027] [LOG] Create new news fetcher for url: https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml - Interval: 300000
[20.02.2021 15:27.57.082] [INFO] Checking git for module: Hello-Lucy
[20.02.2021 15:27.58.320] [INFO] Newsfeed-Fetcher: Broadcasting 56 items.
[20.02.2021 15:27.58.952] [INFO] Calendar-Fetcher: Broadcasting 10 events.
[20.02.2021 15:32.58.623] [INFO] Newsfeed-Fetcher: Broadcasting 56 items.
[20.02.2021 15:33.00.255] [INFO] Calendar-Fetcher: Broadcasting 10 events.
^C
pi@raspberrypi:~/MagicMirror $

Mykle1

@derick4963 said in hello lucy:

I have reformat with clean MM with only Hello-lucy and default module but still getting white mic with ERROR.

I don’t know why you would have done that yet. Did you attempt to rectify the port conflict? Did you follow the instructions given by sdetweil? When given help, it is customary (and polite) to let the helper know if you followed their directions and the result. Anyway . .

What hardware are you using?
What OS is on the hardware?
How did you install MM?

Run arecord -l in a terminal and post the output.

Please use a code block when posting any code on the forum. It makes the code much easier to read for people trying to help you.

Screenshot from 2021-02-20 10-28-07.png

Click the icon with the yellow box around it and post your code accordingly.

derick4963

@mykle1

pi@raspberrypi:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 2: UM02 [UM02], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~ $

I don’t know why you would have done that yet. Did you attempt to rectify the port conflict?
Yes, by changing the the port from 8080 to 8188.

Did you follow the instructions given by sdetweil?
Yes, but didnt work.

When given help, it is customary (and polite) to let the helper know if you followed their directions and the result. Anyway . .
Sorry first time using the forum and new to all these. Will take note of it when using the forum.

What hardware are you using?
raspberry pi 4b, 4GB ram. 32GB sd card

What OS is on the hardware?
pi@raspberrypi:~ $ uname -a
Linux raspberrypi 5.10.11-v7l+ #1399 SMP Thu Jan 28 12:09:48 GMT 2021 armv7l GNU/Linux
pi@raspberrypi:~ $ cat /etc/os-release
PRETTY_NAME=“Raspbian GNU/Linux 10 (buster)”
NAME=“Raspbian GNU/Linux”
VERSION_ID=“10”
VERSION=“10 (buster)”
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL=“http://www.raspbian.org/”
SUPPORT_URL=“http://www.raspbian.org/RaspbianForums”
BUG_REPORT_URL=“http://www.raspbian.org/RaspbianBugs”

How did you install MM?
By following the offical Magic mirror website

sdetweil

@derick4963 how did u confirm mic?

arecord test.wav
speak something
ctrl-c to stop recording
aplay test.wav
do u hear what u said before,?

Mykle1

@derick4963 said in hello lucy:

card 2: UM02 [UM02], device 0: USB Audio [USB Audio]

Just confirming your microphone entry in the Lucy config entry

microphone: "2,0", - Yes?