Problems With Weather

Mykle1

@brendan_c23 said in Problems With Weather:

Is it because I am using the same APPid for both weather modules?

No, you can use the appid twice. However, MM can not share port 8080

brendan_c23

@mykle1 How could I try fixing this?

Mykle1

@brendan_c23

try running pm2 status in the terminal (I think that’s the command) and post the result here please.

Don’t post a picture. Copy the terminal output and paste it into your reply.

Also, do you have any other programs running on the Pi besides Magic Mirror?

brendan_c23

This post is deleted!

Mykle1

@brendan_c23

output should look like this

pi@Pi3:~ $ pm2 status
┌──────┬──────┬────────┬───┬─────┬──────────┐
│ Name │ mode │ status │ ↺ │ cpu │ memory   │
├──────┼──────┼────────┼───┼─────┼──────────┤
│ mm   │ fork │ online │ 0 │ 0%  │ 1.3 MB   │
└──────┴──────┴────────┴───┴─────┴──────────┘
 Use `pm2 show <id|name>` to get more details about an app
pi@Pi3:~ $

brendan_c23

@mykle1 pi@raspberrypi:~ $ pm2 status
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name │ mode │ ↺ │ status │ cpu │ memory │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ fork │ 6 │ online │ 0% │ 2.6mb │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@raspberrypi:~ $

brendan_c23

@mykle1 I should not have any other programs running besides the magic mirror as it is the only one I have installed , but not totally sure if there are any default programs already on there.

Mykle1

@brendan_c23

ok,. so try pm2 stop MagicMirror

then pm2 start MagicMirror

brendan_c23

@mykle1 pi@raspberrypi:~ $ pm2 stop MagicMirror
[PM2] Applying action stopProcessId on app [MagicMirror](ids: 0)
[PM2] MagicMirror ✓
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name │ mode │ ↺ │ status │ cpu │ memory │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ fork │ 6 │ stopped │ 0% │ 0b │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@raspberrypi:~ $ pm2 start MagicMirror
[PM2] Applying action restartProcessId on app [MagicMirror](ids: 0)
[PM2] MagicMirror ✓
[PM2] Process successfully started
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name │ mode │ ↺ │ status │ cpu │ memory │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0 │ MagicMirror │ fork │ 6 │ online │ 0% │ 2.4mb │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@raspberrypi:~ $
Still no luck displaying forecast, thank you again for bearing with me this long

Mykle1

@brendan_c23

Were there any errors when MM launched?