config file errors?

adamhrastich

/* Magic Mirror Config Sample
*

By Michael Teeuw https://michaelteeuw.nl
MIT Licensed.
For more information on how you can configure this file
See https://github.com/MichMich/MagicMirror#configuration

*/

var config = {
address: “localhost”, // Address to listen on, can be:
// - “localhost”, “127.0.0.1”, “::1” to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - “0.0.0.0”, “::” to listen on any interface
// Default, when address config is left out or empty, is “localhost”
port: 8080,
basePath: “/”, // The URL path where MagicMirror is hosted. If you are using a Reverse proxy
// you must set the sub path here. basePath must end with a /
ipWhitelist: [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.1.5”],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// [“127.0.0.1”, “::ffff:127.0.0.1”, “::1”, “::ffff:192.168.3.0/28”],

useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

language: "en",
logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
timeFormat: 24,
units: "metric",
// serverOnly:  true/false/"local" ,
// local for armv6l processors, default
//   starts serveronly and then starts chrome browser
// false, default for all NON-armv6l devices
// true, force serveronly mode, because you want to.. no UI on this device

modules: [
	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "US Holidays",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check",
					url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
			]
		}
	},
	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "New York",
			locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "c2647e77b86f9ed7922d3cb499204d0"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Weather Forecast",
		config: {
			location: "New York",
			locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "YOUR_OPENWEATHER_API_KEY"
		}
	},

]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

adamhrastich

it says when I run npm run config:check says it’s missing

BKeyport

@adamhrastich the way you posted it, the forum corrupted it.

Please place ``` around the code next time.

That being said, go to the magicmirror directory, and type:

npm run config:check

It’ll help you solve the errors.

adamhrastich

@bkeyport I ran that code and it says the file is not found

BKeyport

@adamhrastich Like this:

pi@officemirror:~ $ cd MagicMirror/
pi@officemirror:~/MagicMirror $ npm run config:check

> magicmirror@2.16.0 config:check /home/pi/MagicMirror
> node js/check_config.js

[08.07.2021 16:19.03.333] [INFO]  Checking file...  /home/pi/MagicMirror/config/config.js
[08.07.2021 16:19.03.575] [INFO]  Your configuration file doesn't contain syntax errors :)

adamhrastich

@bkeyport I did and this is what came up.
‘’'pi@raspberrypi:~/MagicMirror $ npm run config:check

magicmirror@2.16.0 config:check /home/pi/MagicMirror
node js/check_config.js

[08.07.2021 18:14.40.549] [ERROR] File not found: /home/pi/MagicMirror/config/config.js
/home/pi/MagicMirror/js/check_config.js:38
throw new Error(“No config file present!”);
^

Error: No config file present!
at checkConfigFile (/home/pi/MagicMirror/js/check_config.js:38:9)
at Object. (/home/pi/MagicMirror/js/check_config.js:73:1)
at Module._compile (internal/modules/cjs/loader.js:778:30)
at Object.Module._extensions…js (internal/modules/cjs/loader.js:789:10)
at Module.load (internal/modules/cjs/loader.js:653:32)
at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
at Function.Module._load (internal/modules/cjs/loader.js:585:3)
at Function.Module.runMain (internal/modules/cjs/loader.js:831:12)
at startup (internal/bootstrap/node.js:283:19)
at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! magicmirror@2.16.0 config:check: node js/check_config.js
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.16.0 config:check script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2021-07-08T23_14_40_681Z-debug.log
‘’’

BKeyport

@adamhrastich Well, there’s your problem. The config file should be config.js - if you’re trying to use the sample as a base, change to the correct by using mv config.js.sample config.js

adamhrastich

@bkeyport said in config file errors?:

pi@raspberrypi:~/MagicMirror $ mv config.js.sample config.js
mv: cannot stat ‘config.js.sample’: No such file or directory

BKeyport

@adamhrastich in your config subdirectory. ~/MagicMirror/config/

adamhrastich

@bkeyport oh I’m stupid… thanks so much I can not believe I didn’t see that