Gesture control with APDS-9960

[bibi]

@bolish i thought about it meantimes i am waiting for delivery… i was thinking to make a kind of slot in one of the wooden frame side, just enough to make so that the wood layer is so thin that i hope it will let pass the gesture but it will be difficult to do as my mirror is already build now and i can’s say for now if it will work. if you come up with another idea… feel free to share :)

[bolish]

@bibi
I’ve already made some trials with 1mm thin wood. Forget about it.
You will find the product data sheet with some recommandation at the bottom of below page :
link text

I’ve tried behing 2mm wood, with a hole (3mm diameter), it works fine. Not so ugly…

Let’s see.

Regards

[bibi]

@bolish that’s exactly what i was thinking but thx for the recommendations… i will even not try an attempt then. i wanted smt “beautiful” as you mentioned but without seeing the sensor…
hmm i’ll think about smt or maybe i’ll check another solution as voice command… with jarvis

[wifibum]

Did you ever get the APDS-9960 working with MM? I happen to have one, would keep me from ordering something else.

[wishmaster270]

@bibi I am using an Apds sensor with other sensors on a Arduino connected to the pi via serial interface. I documented it and wrote a universal module to receive messages on the serial interface. You can find my documentation at Examples

[wifibum]

@wishmaster270 , Sweet! Thanks!!