MMM-CalendarExt3

Lilleberg

@MMRIZE Tried adding this to the config, but still no result. The module broadcasts the events, but they wont show in the Ext3 module. Se attached image. I have removed the other calendars from the config, and only show the events from the Google Calendar module.

MMRIZE

@Lilleberg If possible, can you share the copy of your calendar? (And the final config file also) (eouia0819@gmail.com)
Without the real data I couldn’t catch what really happened in yours.

Lilleberg

@MMRIZE I’m sending you an e-mail

nicmoly

@MMRIZE Hi Im also having the exact same issue as @Lilleberg , I have however seen glimpses of this working as intended but it seems to be on a whim, either it restarts and works and then not again untill a further reboot or it just wont. I find it weird that using MMM-CalendarExt3Journal works perfect every time with similar settings. Any ideas on what may be going on? Weird thing is leaving the MMM running all the sudden it works like 20-30min later, so im wondering if theres some weirdness with how the data comes in from the GoogleCalendar module
Heres my config for refrence:

{
    		module: 'MMM-GoogleCalendar',
   			header: "My Google Private Cal",
  			position: "upper_third",
			hiddenOnStartup: true,
 			config: {
				broadcastEvents: true,
				broadcastPastEvents: true,
				calendars: [
						{
							symbol: "calendar-week",
							calendarID: "***",
							name: "1_cal", // <= RECOMMENDED to assign name
							color: "yellow" // <= RECOMMENDED to assign color
						},
						{
							symbol: "calendar-week",
							calendarID: "***",
							name: "2_cal", // <= RECOMMENDED to assign name
							color: "red" // <= RECOMMENDED to assign color
						},
						{
							symbol: "calendar-week",
							calendarID: "en.canadian#holiday@group.v.calendar.google.com",
							name: "holiday_cal", // <= RECOMMENDED to assign name
							color: "green" // <= RECOMMENDED to assign color
						},
						
				],
			}
		},
		{
  			module: "MMM-CalendarExt3",
  			position: "lower_third",
			title: "Family Calendar",
  			config: {
				mode: "month",
				instanceID: "I-calendar-month",
				maxEventLines: 5,
				firstDayOfWeek: 1,
				preProcessor: (e) => {
					if (e.start?.dateTime) {
				  		e.startDate = new Date(e.start.dateTime).valueOf()
					} else if (e.start?.date) {
				  		e.startDate = new Date(`${e.start.date}T00:00:00`).valueOf()
					}

					if (e.end?.dateTime) {
				  		e.endDate = new Date(e.end.dateTime).valueOf()
					} else if (e.end?.date) {
				  		e.endDate = new Date(`${e.end.date}T00:00:00`).valueOf()
					}

					e.title = e.summary
					e.fullDayEvent = (e.start?.date) ? true : false
					return e
				},
  			}
		},
//		{
//  			module: "MMM-CalendarExt3Journal",
//  			position: "bottom_bar",
//  			config: {
//				height: '50vh',
//   			 	width: '100%',
//				//locale: 'en-GB',
//				staticWeek: true,
//				staticTime: true,
//				hourLength: 14,
//				beginHour:  8,
//				preProcessor: (e) => {
//					if (e.start?.dateTime) {
//				  		e.startDate = new Date(e.start.dateTime).valueOf()
//					} else if (e.start?.date) {
//				  		e.startDate = new Date(`${e.start.date}T00:00:00`).valueOf()
//					}
//
//					if (e.end?.dateTime) {
//				  		e.endDate = new Date(e.end.dateTime).valueOf()
//					} else if (e.end?.date) {
//				  		e.endDate = new Date(`${e.end.date}T00:00:00`).valueOf()
//					}
//
//					e.title = e.summary
//					e.fullDayEvent = (e.start?.date) ? true : false
//					return e
//				}
//  			}
//		},

MMRIZE

@nicmoly
Usually, your symptom happens by insufficient waitFetch. Give it more. (By default it would be 5_000 ms. Give it more like 10_000)

bobbylx

Had an issue with my monitor so I took that opportunity to reload Pi OS and MM. Unfortunately, I goofed and flashed over my config and css backups. So I’m starting fresh.

That went fine but I cannot figure out why my calendar is not loading. My MM loads in Midori, I get my date/time in the upper left but the rest of the page is blank, no config warnings or empty boxes, just a completely black page. Config check shows no issues. Can someone look at my config.js real quick and see if I’m missing something? I have not touched any other files at this point, I was just trying to get the calendar to load before I start really customizing.

let config = {
        address: "localhost",   // Address to listen on, can be:
                                                        // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
                                                        // - another specific IPv4/6 to listen on a specific interface
                                                        // - "0.0.0.0", "::" to listen on any interface
                                                        // Default, when address config is left out or empty, is "localhost"
        port: 8080,
        basePath: "/",  // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
                                                                        // you must set the sub path here. basePath must end with a /
        ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],  // Set [] to allow all IP addresses
                                                                        // or add a specific IPv4 of 192.168.1.5 :
                                                                        // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
                                                                        // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
                                                                        // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

        useHttps: false,                        // Support HTTPS or not, default "false" will use HTTP
        httpsPrivateKey: "",    // HTTPS private key path, only require when useHttps is true
        httpsCertificate: "",   // HTTPS Certificate path, only require when useHttps is true

        language: "en",
        locale: "en-US",
        logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
        timeFormat: 24,
        units: "metric",

        modules: [
                {
                        module: "alert",
                },
                {
                        module: "updatenotification",
                        position: "top_bar"
                },
                {
                        module: "clock",
                        position: "top_left"
                },
                {
                        module: "calendar",
                        header: "US Holidays",
                        position: "",
                        config: {
                                calendars: [
                                        {
                                                fetchInterval: 7 * 24 * 60 * 60 * 1000,
                                                symbol: "calendar-check",
                                                url: "https://ics.calendarlabs.com/76/mm3137/US_Holidays.ics"
                                        }
                                ]
                        }
                },
                {
                        module: "compliments",
                        position: ""
                },
                {
                        module: "weather",
                        position: "top_right",
                        config: {
                                weatherProvider: "openweathermap",
                                type: "current",
                                location: "New York",
                                locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
                                apiKey: "YOUR_OPENWEATHER_API_KEY"
                        }
                },
                {
                        module: "weather",
                        position: "top_right",
                        header: "Weather Forecast",
                        config: {
                                weatherProvider: "openweathermap",
                                type: "forecast",
                                location: "New York",
                                locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
                                apiKey: "YOUR_OPENWEATHER_API_KEY"
                        }
                },
                        {
                          module: "calendar",
                          position: "",
                          config: {
                            broadcastPastEvents: true, // <= IMPORTANT to see past events
                            calendars: [
                              {
                                url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics",
                                name: "us_holiday", // <= RECOMMENDED to assign name
                                color: "red" // <= RECOMMENDED to assign color
                                }
                        ]
                        }
                      },
                        {
                          module: "MMM-CalendarExt3",
                          position: "bottom_bar",
                           title: "",
                           config: {
                            mode: "month",
                            instanceId: "basicCalendar",
                            locale: 'en-EN',
                            maxEventLines: 5,
                            firstDayOfWeek: 1,
                            calendarSet: ['us_holiday'],
                          }
                },
        ]
};

sdetweil

@bobbylx said in MMM-CalendarExt3:

                    module: "compliments",
                    position: ""

must be a valid position if specified…

you can disable a module by adding

disabled: true,

after the module: line

you can also comment out the position
// position:“…”

this would be how you use the default calendar with Ext3…
it would work, but not be shown

backup, backup, backup…
see my scripts, backup to private repo on github… restore from there
versionable…
3 tiny files… and any keyfiles/token files…
https://github.com/sdetweil/MagicMirror-backup-restore

MMRIZE

@bobbylx
CX3* series may not work on MIDORI, sorry. It’s too old browser, doesn’t support advanced modern JavaScript technologies.

bobbylx

@sdetweil said in MMM-CalendarExt3:

@bobbylx said in MMM-CalendarExt3:
                    module: "compliments",
                    position: ""
must be a valid position if specified…

you can disable a module by adding
disabled: true,
after the module: line

you can also comment out the position
// position:“…”

this would be how you use the default calendar with Ext3…
it would work, but not be shown

backup, backup, backup…
see my scripts, backup to private repo on github… restore from there
versionable…
3 tiny files… and any keyfiles/token files…
https://github.com/sdetweil/MagicMirror-backup-restore

Thanks, just made that change, found a couple more that needed attention. I also checked my history in this thread, I’ve posted my config before asking other questions so I was able to borrow some lines. Getting close now.

@MMRIZE said in MMM-CalendarExt3:

@bobbylx
CX3* series may not work on MIDORI, sorry. It’s too old browser, doesn’t support advanced modern JavaScript technologies.

I had been using it with Midori until just a few days ago when I decided to reload. It wasn’t fast or always the best, but I’m using a Pi zero W so limited on browsers right now. I’ll be picking up a Pi 3 or 4 soon then I’ll do this all over again.

aymen_a22

Unsure why, but I keep getting this error message.

Is anyone able to assist if possible please?

Warning: vkCreateInstance: Found no drivers!
Warning: vkCreateInstance failed with VK_ERROR_INCOMPATIBLE_DRIVER
at CheckVkSuccessImpl (…/…/third_party/dawn/src/dawn/native/vulkan/VulkanError.cpp:88)
at CreateVkInstance (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:458)
at Initialize (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:344)
at Create (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:266)
at operator() (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:521)