MMM-CalendarExt3

MMRIZE · Mar 15, 2024, 7:55 AM

@nicmoly
Usually, your symptom happens by insufficient waitFetch. Give it more. (By default it would be 5_000 ms. Give it more like 10_000)

bobbylx · Mar 16, 2024, 4:54 PM

Had an issue with my monitor so I took that opportunity to reload Pi OS and MM. Unfortunately, I goofed and flashed over my config and css backups. So I’m starting fresh.

That went fine but I cannot figure out why my calendar is not loading. My MM loads in Midori, I get my date/time in the upper left but the rest of the page is blank, no config warnings or empty boxes, just a completely black page. Config check shows no issues. Can someone look at my config.js real quick and see if I’m missing something? I have not touched any other files at this point, I was just trying to get the calendar to load before I start really customizing.

let config = {
        address: "localhost",   // Address to listen on, can be:
                                                        // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
                                                        // - another specific IPv4/6 to listen on a specific interface
                                                        // - "0.0.0.0", "::" to listen on any interface
                                                        // Default, when address config is left out or empty, is "localhost"
        port: 8080,
        basePath: "/",  // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
                                                                        // you must set the sub path here. basePath must end with a /
        ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],  // Set [] to allow all IP addresses
                                                                        // or add a specific IPv4 of 192.168.1.5 :
                                                                        // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
                                                                        // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
                                                                        // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

        useHttps: false,                        // Support HTTPS or not, default "false" will use HTTP
        httpsPrivateKey: "",    // HTTPS private key path, only require when useHttps is true
        httpsCertificate: "",   // HTTPS Certificate path, only require when useHttps is true

        language: "en",
        locale: "en-US",
        logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
        timeFormat: 24,
        units: "metric",

        modules: [
                {
                        module: "alert",
                },
                {
                        module: "updatenotification",
                        position: "top_bar"
                },
                {
                        module: "clock",
                        position: "top_left"
                },
                {
                        module: "calendar",
                        header: "US Holidays",
                        position: "",
                        config: {
                                calendars: [
                                        {
                                                fetchInterval: 7 * 24 * 60 * 60 * 1000,
                                                symbol: "calendar-check",
                                                url: "https://ics.calendarlabs.com/76/mm3137/US_Holidays.ics"
                                        }
                                ]
                        }
                },
                {
                        module: "compliments",
                        position: ""
                },
                {
                        module: "weather",
                        position: "top_right",
                        config: {
                                weatherProvider: "openweathermap",
                                type: "current",
                                location: "New York",
                                locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
                                apiKey: "YOUR_OPENWEATHER_API_KEY"
                        }
                },
                {
                        module: "weather",
                        position: "top_right",
                        header: "Weather Forecast",
                        config: {
                                weatherProvider: "openweathermap",
                                type: "forecast",
                                location: "New York",
                                locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
                                apiKey: "YOUR_OPENWEATHER_API_KEY"
                        }
                },
                        {
                          module: "calendar",
                          position: "",
                          config: {
                            broadcastPastEvents: true, // <= IMPORTANT to see past events
                            calendars: [
                              {
                                url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics",
                                name: "us_holiday", // <= RECOMMENDED to assign name
                                color: "red" // <= RECOMMENDED to assign color
                                }
                        ]
                        }
                      },
                        {
                          module: "MMM-CalendarExt3",
                          position: "bottom_bar",
                           title: "",
                           config: {
                            mode: "month",
                            instanceId: "basicCalendar",
                            locale: 'en-EN',
                            maxEventLines: 5,
                            firstDayOfWeek: 1,
                            calendarSet: ['us_holiday'],
                          }
                },
        ]
};

sdetweil · Mar 16, 2024, 4:59 PM

@bobbylx said in MMM-CalendarExt3:

                    module: "compliments",
                    position: ""

must be a valid position if specified…

you can disable a module by adding

disabled: true,

after the module: line

you can also comment out the position
// position:“…”

this would be how you use the default calendar with Ext3…
it would work, but not be shown

backup, backup, backup…
see my scripts, backup to private repo on github… restore from there
versionable…
3 tiny files… and any keyfiles/token files…
https://github.com/sdetweil/MagicMirror-backup-restore

MMRIZE · Mar 16, 2024, 8:07 PM

@bobbylx
CX3* series may not work on MIDORI, sorry. It’s too old browser, doesn’t support advanced modern JavaScript technologies.

bobbylx · Mar 16, 2024, 9:58 PM

@sdetweil said in MMM-CalendarExt3:

@bobbylx said in MMM-CalendarExt3:
                    module: "compliments",
                    position: ""
must be a valid position if specified…

you can disable a module by adding
disabled: true,
after the module: line

you can also comment out the position
// position:“…”

this would be how you use the default calendar with Ext3…
it would work, but not be shown

backup, backup, backup…
see my scripts, backup to private repo on github… restore from there
versionable…
3 tiny files… and any keyfiles/token files…
https://github.com/sdetweil/MagicMirror-backup-restore

Thanks, just made that change, found a couple more that needed attention. I also checked my history in this thread, I’ve posted my config before asking other questions so I was able to borrow some lines. Getting close now.

@MMRIZE said in MMM-CalendarExt3:

@bobbylx
CX3* series may not work on MIDORI, sorry. It’s too old browser, doesn’t support advanced modern JavaScript technologies.

I had been using it with Midori until just a few days ago when I decided to reload. It wasn’t fast or always the best, but I’m using a Pi zero W so limited on browsers right now. I’ll be picking up a Pi 3 or 4 soon then I’ll do this all over again.

aymen_a22 · Mar 19, 2024, 3:15 PM

Unsure why, but I keep getting this error message.

Is anyone able to assist if possible please?

Warning: vkCreateInstance: Found no drivers!
Warning: vkCreateInstance failed with VK_ERROR_INCOMPATIBLE_DRIVER
at CheckVkSuccessImpl (…/…/third_party/dawn/src/dawn/native/vulkan/VulkanError.cpp:88)
at CreateVkInstance (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:458)
at Initialize (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:344)
at Create (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:266)
at operator() (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:521)

sdetweil · Mar 19, 2024, 6:43 PM

@aymen_a22 bug in electron , nothing we can do… ignore it

princemaxwell · Mar 19, 2024, 8:36 PM

Hello together,
i have configured 8 calendars in the default calendar module. Three of them are from “i.cal.to” and five are my public iCloudcalendars.

The default calendar app is loading them without errors, but MMM-CalendarExt3 has problems to view the iCloud entries.

The mm-error.log shows:

[19.03.2024 21:24.43.184] [ERROR] Calendar Error. Could not fetch calendar:  https://p63-caldav.icloud.com/published/2/MTA... TypeError: fetch failed
    at Object.fetch (node:internal/deps/undici/undici:11576:11) {
  cause: SocketError: other side closed
      at TLSSocket.onSocketEnd (node:internal/deps/undici/undici:9790:26)
      at TLSSocket.emit (node:events:526:35)
      at endReadableNT (node:internal/streams/readable:1359:12)
      at process.processTicksAndRejections (node:internal/process/task_queues:82:21) {
    code: 'UND_ERR_SOCKET',
    socket: {
      localAddress: '10.0.0.20',
      localPort: 37214,
      remoteAddress: undefined,
      remotePort: undefined,
      remoteFamily: undefined,
      timeout: undefined,
      bytesWritten: 639,
      bytesRead: 143898
    }
  }
}

while the mm-out.log shows:

[19.03.2024 21:23.35.168] [INFO]  Calendar-Fetcher: Broadcasting 5 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:23.35.332] [INFO]  updatenotification: You are using pm2 with MagicMirror
[19.03.2024 21:23.35.333] [INFO]  Checking git for module: MMM-soccer
[19.03.2024 21:23.35.462] [INFO]  Checking git for module: MMM-Planetarium
[19.03.2024 21:23.35.591] [INFO]  Checking git for module: MMM-Globe2
[19.03.2024 21:23.36.450] [INFO]  Calendar-Fetcher: Broadcasting 0 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:23.36.513] [INFO]  Checking git for module: MagicMirror
[19.03.2024 21:23.36.963] [INFO]  Newsfeed-Fetcher: Broadcasting 30 items.
[19.03.2024 21:23.37.049] [INFO]  Newsfeed-Fetcher: Broadcasting 100 items.
[19.03.2024 21:23.37.825] [INFO]  Calendar-Fetcher: Broadcasting 7 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:24.03.308] [INFO]  Calendar-Fetcher: Broadcasting 8 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:24.43.055] [INFO]  Calendar-Fetcher: Broadcasting 10 events from https://p29-caldav.icloud.com/published/2/ODA....
[19.03.2024 21:24.43.503] [INFO]  Calendar-Fetcher: Broadcasting 1 events from https://i.cal.to/ical/77/....
[19.03.2024 21:24.43.754] [INFO]  Calendar-Fetcher: Broadcasting 5 events from https://i.cal.to/ical/3/....
[19.03.2024 21:24.43.781] [INFO]  Calendar-Fetcher: Broadcasting 2 events from https://i.cal.to/ical/61/....
[19.03.2024 21:24.44.853] [INFO]  Calendar-Fetcher: Broadcasting 0 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:24.45.665] [INFO]  Calendar-Fetcher: Broadcasting 7 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:25.10.627] [INFO]  Calendar-Fetcher: Broadcasting 8 events from https://p63-caldav.icloud.com/published/2/MTA....

I have increased the waitFetch, but it didn’t help.

		{
			module: "MMM-CalendarExt3",
			position: "middle_center",
			waitFetch: 32000,
			disabled: false,
		},

Can someone help me?

Max

sdetweil · Mar 19, 2024, 8:45 PM

@princemaxwell the error log says problem w the default calendar as ext3 gets it’s events there

princemaxwell · Mar 19, 2024, 8:50 PM

@sdetweil when i disable the MMM-CalendarExt3 module, the errors are gone.

All calendars are working fine and loading quickly in default calendar module.