MMM-CalendarExt3

MMRIZE

@nicmoly
Usually, your symptom happens by insufficient waitFetch. Give it more. (By default it would be 5_000 ms. Give it more like 10_000)

bobbylx

Had an issue with my monitor so I took that opportunity to reload Pi OS and MM. Unfortunately, I goofed and flashed over my config and css backups. So I’m starting fresh.

That went fine but I cannot figure out why my calendar is not loading. My MM loads in Midori, I get my date/time in the upper left but the rest of the page is blank, no config warnings or empty boxes, just a completely black page. Config check shows no issues. Can someone look at my config.js real quick and see if I’m missing something? I have not touched any other files at this point, I was just trying to get the calendar to load before I start really customizing.

let config = {
        address: "localhost",   // Address to listen on, can be:
                                                        // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
                                                        // - another specific IPv4/6 to listen on a specific interface
                                                        // - "0.0.0.0", "::" to listen on any interface
                                                        // Default, when address config is left out or empty, is "localhost"
        port: 8080,
        basePath: "/",  // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
                                                                        // you must set the sub path here. basePath must end with a /
        ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],  // Set [] to allow all IP addresses
                                                                        // or add a specific IPv4 of 192.168.1.5 :
                                                                        // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
                                                                        // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
                                                                        // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

        useHttps: false,                        // Support HTTPS or not, default "false" will use HTTP
        httpsPrivateKey: "",    // HTTPS private key path, only require when useHttps is true
        httpsCertificate: "",   // HTTPS Certificate path, only require when useHttps is true

        language: "en",
        locale: "en-US",
        logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
        timeFormat: 24,
        units: "metric",

        modules: [
                {
                        module: "alert",
                },
                {
                        module: "updatenotification",
                        position: "top_bar"
                },
                {
                        module: "clock",
                        position: "top_left"
                },
                {
                        module: "calendar",
                        header: "US Holidays",
                        position: "",
                        config: {
                                calendars: [
                                        {
                                                fetchInterval: 7 * 24 * 60 * 60 * 1000,
                                                symbol: "calendar-check",
                                                url: "https://ics.calendarlabs.com/76/mm3137/US_Holidays.ics"
                                        }
                                ]
                        }
                },
                {
                        module: "compliments",
                        position: ""
                },
                {
                        module: "weather",
                        position: "top_right",
                        config: {
                                weatherProvider: "openweathermap",
                                type: "current",
                                location: "New York",
                                locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
                                apiKey: "YOUR_OPENWEATHER_API_KEY"
                        }
                },
                {
                        module: "weather",
                        position: "top_right",
                        header: "Weather Forecast",
                        config: {
                                weatherProvider: "openweathermap",
                                type: "forecast",
                                location: "New York",
                                locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
                                apiKey: "YOUR_OPENWEATHER_API_KEY"
                        }
                },
                        {
                          module: "calendar",
                          position: "",
                          config: {
                            broadcastPastEvents: true, // <= IMPORTANT to see past events
                            calendars: [
                              {
                                url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics",
                                name: "us_holiday", // <= RECOMMENDED to assign name
                                color: "red" // <= RECOMMENDED to assign color
                                }
                        ]
                        }
                      },
                        {
                          module: "MMM-CalendarExt3",
                          position: "bottom_bar",
                           title: "",
                           config: {
                            mode: "month",
                            instanceId: "basicCalendar",
                            locale: 'en-EN',
                            maxEventLines: 5,
                            firstDayOfWeek: 1,
                            calendarSet: ['us_holiday'],
                          }
                },
        ]
};

sdetweil

@bobbylx said in MMM-CalendarExt3:

                    module: "compliments",
                    position: ""

must be a valid position if specified…

you can disable a module by adding

disabled: true,

after the module: line

you can also comment out the position
// position:“…”

this would be how you use the default calendar with Ext3…
it would work, but not be shown

backup, backup, backup…
see my scripts, backup to private repo on github… restore from there
versionable…
3 tiny files… and any keyfiles/token files…
https://github.com/sdetweil/MagicMirror-backup-restore

MMRIZE

@bobbylx
CX3* series may not work on MIDORI, sorry. It’s too old browser, doesn’t support advanced modern JavaScript technologies.

bobbylx

@sdetweil said in MMM-CalendarExt3:

@bobbylx said in MMM-CalendarExt3:
                    module: "compliments",
                    position: ""
must be a valid position if specified…

you can disable a module by adding
disabled: true,
after the module: line

you can also comment out the position
// position:“…”

this would be how you use the default calendar with Ext3…
it would work, but not be shown

backup, backup, backup…
see my scripts, backup to private repo on github… restore from there
versionable…
3 tiny files… and any keyfiles/token files…
https://github.com/sdetweil/MagicMirror-backup-restore

Thanks, just made that change, found a couple more that needed attention. I also checked my history in this thread, I’ve posted my config before asking other questions so I was able to borrow some lines. Getting close now.

@MMRIZE said in MMM-CalendarExt3:

@bobbylx
CX3* series may not work on MIDORI, sorry. It’s too old browser, doesn’t support advanced modern JavaScript technologies.

I had been using it with Midori until just a few days ago when I decided to reload. It wasn’t fast or always the best, but I’m using a Pi zero W so limited on browsers right now. I’ll be picking up a Pi 3 or 4 soon then I’ll do this all over again.

aymen_a22

Unsure why, but I keep getting this error message.

Is anyone able to assist if possible please?

Warning: vkCreateInstance: Found no drivers!
Warning: vkCreateInstance failed with VK_ERROR_INCOMPATIBLE_DRIVER
at CheckVkSuccessImpl (…/…/third_party/dawn/src/dawn/native/vulkan/VulkanError.cpp:88)
at CreateVkInstance (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:458)
at Initialize (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:344)
at Create (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:266)
at operator() (…/…/third_party/dawn/src/dawn/native/vulkan/BackendVk.cpp:521)

sdetweil

@aymen_a22 bug in electron , nothing we can do… ignore it

princemaxwell

Hello together,
i have configured 8 calendars in the default calendar module. Three of them are from “i.cal.to” and five are my public iCloudcalendars.

The default calendar app is loading them without errors, but MMM-CalendarExt3 has problems to view the iCloud entries.

The mm-error.log shows:

[19.03.2024 21:24.43.184] [ERROR] Calendar Error. Could not fetch calendar:  https://p63-caldav.icloud.com/published/2/MTA... TypeError: fetch failed
    at Object.fetch (node:internal/deps/undici/undici:11576:11) {
  cause: SocketError: other side closed
      at TLSSocket.onSocketEnd (node:internal/deps/undici/undici:9790:26)
      at TLSSocket.emit (node:events:526:35)
      at endReadableNT (node:internal/streams/readable:1359:12)
      at process.processTicksAndRejections (node:internal/process/task_queues:82:21) {
    code: 'UND_ERR_SOCKET',
    socket: {
      localAddress: '10.0.0.20',
      localPort: 37214,
      remoteAddress: undefined,
      remotePort: undefined,
      remoteFamily: undefined,
      timeout: undefined,
      bytesWritten: 639,
      bytesRead: 143898
    }
  }
}

while the mm-out.log shows:

[19.03.2024 21:23.35.168] [INFO]  Calendar-Fetcher: Broadcasting 5 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:23.35.332] [INFO]  updatenotification: You are using pm2 with MagicMirror
[19.03.2024 21:23.35.333] [INFO]  Checking git for module: MMM-soccer
[19.03.2024 21:23.35.462] [INFO]  Checking git for module: MMM-Planetarium
[19.03.2024 21:23.35.591] [INFO]  Checking git for module: MMM-Globe2
[19.03.2024 21:23.36.450] [INFO]  Calendar-Fetcher: Broadcasting 0 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:23.36.513] [INFO]  Checking git for module: MagicMirror
[19.03.2024 21:23.36.963] [INFO]  Newsfeed-Fetcher: Broadcasting 30 items.
[19.03.2024 21:23.37.049] [INFO]  Newsfeed-Fetcher: Broadcasting 100 items.
[19.03.2024 21:23.37.825] [INFO]  Calendar-Fetcher: Broadcasting 7 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:24.03.308] [INFO]  Calendar-Fetcher: Broadcasting 8 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:24.43.055] [INFO]  Calendar-Fetcher: Broadcasting 10 events from https://p29-caldav.icloud.com/published/2/ODA....
[19.03.2024 21:24.43.503] [INFO]  Calendar-Fetcher: Broadcasting 1 events from https://i.cal.to/ical/77/....
[19.03.2024 21:24.43.754] [INFO]  Calendar-Fetcher: Broadcasting 5 events from https://i.cal.to/ical/3/....
[19.03.2024 21:24.43.781] [INFO]  Calendar-Fetcher: Broadcasting 2 events from https://i.cal.to/ical/61/....
[19.03.2024 21:24.44.853] [INFO]  Calendar-Fetcher: Broadcasting 0 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:24.45.665] [INFO]  Calendar-Fetcher: Broadcasting 7 events from https://p63-caldav.icloud.com/published/2/MTA....
[19.03.2024 21:25.10.627] [INFO]  Calendar-Fetcher: Broadcasting 8 events from https://p63-caldav.icloud.com/published/2/MTA....

I have increased the waitFetch, but it didn’t help.

		{
			module: "MMM-CalendarExt3",
			position: "middle_center",
			waitFetch: 32000,
			disabled: false,
		},

Can someone help me?

Max

sdetweil

@princemaxwell the error log says problem w the default calendar as ext3 gets it’s events there

princemaxwell

@sdetweil when i disable the MMM-CalendarExt3 module, the errors are gone.

All calendars are working fine and loading quickly in default calendar module.

MMRIZE

@princemaxwell
CX3 doesn’t connect or fetch calendar server. That error probably has been caused by default calendar module.

MMRIZE

@princemaxwell
CX3*s do not use nodeJS at all, so they are not related to your error messages. The modules are executed on the browser level, not on the server-side node environment, so they could not affect server-side processes like calendar fetching.
Your error message (UND_ERR_SOCKET) is caused by the undici node module; it may be used inside of the default calendar module to connect through HTTP/1.1. That error usually happens when the connection is closed by long waits or prior preemption.
There is a weird thing. As far as I know, the default calendar module depends on node-ical, which uses axios instead of undici. So I wonder why and from where this error message comes.

To make things simple clearly;

Backup your current config.js in the safe area.
Create a new config.js, and remove all other not-releated modules like MMM-Planetarium, MMM-soccer, … Leave only clock, calendar and MMM-CalendarExt3 modules.
Begin with one or two calendars, not all the calendars.
Try to execute MM again, and let’s see what happens.
After confirmation that a small qty of calendars has no issue, add more calendars.
After confirmation that there is no issue with the calendars, try adding more modules one by one.

(A possible reason, I guess, is that your modules are racing to use the network/dest-server severely. For example, your calendars look being rescanned every minutes. You may need to rearrange the interval of the schedule.)

sdetweil

@MMRIZE calendar uses built in fetch to get the ics file. we do not have node-ical fetch it for us ( the prior ical lib did not provide fetch)

MMRIZE

@sdetweil said in MMM-CalendarExt3:

@MMRIZE calendar uses built in fetch to get the ics file. we do not have node-ical fetch it for us ( the prior ical lib did not provide fetch)

If so, this is really weird where the undici module is used.

sdetweil

@MMRIZE undici is the implementation code of fetch

princemaxwell

@MMRIZE
Thanks for your answer.

I cleaned up my config.js and only had following modules in it:

alert
updatenotification
clock
calendar
MMM-CalendarExt3

No matter how many calendars I have activated, the default calendar loads all entries quite quickly, although you can notice that the “large” calendars with many entries took a few seconds to load (sometimes up to 20-30 seconds).

Nevertheless, I deleted the fetchInterval (31000) in the default calendar, so the default value of 300000 is now active.

After the default calendar displayed all entries, it took at least another 10 minutes for them to appear in the MMM-CalendarExt3.

Why is this taking so long? They are sent to MMM-CalendarExt3 via “broadcastEvents” or what?

I took a look at the sizes of my calendar:

Calendar 1: 1,068,804 bytes
Calendar 2: 697,796 bytes
Calendar 3: 398,683 bytes
Calendar 4: 150,176 bytes
Calendar 5: 73,128 bytes
Calendar 6: 70,476 bytes
Calendar 7: 23,940 bytes
Calendar 8: 17,221 bytes

Calendars 6-8 are displayed relatively quickly in MMM-CalendarExt3, calendar 5 a little later. The others require the previously mentioned 5-10 minutes.

Could it have something to do with size?

sdetweil

@princemaxwell can you show the console log of mm with the timestamps for the broadcasts from the default calendar?

be careful as these message now expose the calendar url string…

princemaxwell

@sdetweil

No problem, i removed fragments from the share link and named them like my list above, sorted by size, cal-8 is the smallest filesize.

> magicmirror@2.26.0 start
> DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js

[20.03.2024 15:28.52.845] [LOG]   Starting MagicMirror: v2.26.0
[20.03.2024 15:28.52.851] [LOG]   Loading config ...
[20.03.2024 15:28.52.856] [DEBUG] config template file not exists, no envsubst
[20.03.2024 15:28.52.862] [LOG]   Loading module helpers ...
[20.03.2024 15:28.52.864] [LOG]   No helper found for module: alert.
[20.03.2024 15:28.52.898] [LOG]   Initializing new module helper ...
[20.03.2024 15:28.52.898] [LOG]   Module helper loaded: updatenotification
[20.03.2024 15:28.52.900] [LOG]   No helper found for module: clock.
[20.03.2024 15:28.53.231] [LOG]   Initializing new module helper ...
[20.03.2024 15:28.53.232] [LOG]   Module helper loaded: calendar
[20.03.2024 15:28.53.234] [LOG]   No helper found for module: MMM-CalendarExt3.
[20.03.2024 15:28.53.235] [LOG]   All module helpers loaded.
[20.03.2024 15:28.53.244] [LOG]   Starting server on port 8080 ... 
[20.03.2024 15:28.53.275] [LOG]   Server started ...
[20.03.2024 15:28.53.278] [LOG]   Connecting socket for: updatenotification
[20.03.2024 15:28.53.280] [LOG]   Starting module helper: updatenotification
[20.03.2024 15:28.53.281] [LOG]   Connecting socket for: calendar
[20.03.2024 15:28.53.282] [LOG]   Starting node helper for: calendar
[20.03.2024 15:28.53.283] [LOG]   Sockets connected & modules started ...
[20.03.2024 15:28.53.918] [LOG]   Launching application.
[20.03.2024 15:28.57.031] [LOG]   Create new calendarfetcher for url: https://p63-caldav.icloud.com/published/2/MTA-cal-2 - Interval: 3600000
[20.03.2024 15:28.57.194] [LOG]   Create new calendarfetcher for url: https://p63-caldav.icloud.com/published/2/MTA-cal-4 - Interval: 3600000
[20.03.2024 15:28.57.198] [LOG]   Create new calendarfetcher for url: https://p63-caldav.icloud.com/published/2/MTA-cal-3 - Interval: 3600000
[20.03.2024 15:28.57.201] [LOG]   Create new calendarfetcher for url: https://p29-caldav.icloud.com/published/2/ODA-cal-1 - Interval: 3600000
[20.03.2024 15:28.57.205] [LOG]   Create new calendarfetcher for url: https://p63-caldav.icloud.com/published/2/MTA-cal-5 - Interval: 3600000
[20.03.2024 15:28.57.208] [LOG]   Create new calendarfetcher for url: https://i.cal.to/ical/3/borussiadortmund/bundesliga-spielplan/cal-6.ics - Interval: 3600000
[20.03.2024 15:28.57.217] [LOG]   Create new calendarfetcher for url: https://i.cal.to/ical/77/nrw/ferien/cal-8.ics - Interval: 3600000
[20.03.2024 15:28.57.221] [LOG]   Create new calendarfetcher for url: https://i.cal.to/ical/61/nrw/feiertage/cal-7.ics - Interval: 3600000
[20.03.2024 15:28.57.224] [INFO]  updatenotification: Updater Class Loaded!
[20.03.2024 15:28.57.225] [INFO]  updatenotification: Checking PM2 using...
[20.03.2024 15:28.57.227] [INFO]  Checking git for module: MMM-CalendarExt3
[20.03.2024 15:28.57.290] [INFO]  Checking git for module: MagicMirror
[20.03.2024 15:28.57.729] [INFO]  Calendar-Fetcher: Broadcasting 2 events from https://i.cal.to/ical/61/nrw/feiertage/cal-7.ics.
[20.03.2024 15:28.57.825] [INFO]  Calendar-Fetcher: Broadcasting 1 events from https://i.cal.to/ical/77/nrw/ferien/cal-8.ics.
[20.03.2024 15:28.59.069] [INFO]  Calendar-Fetcher: Broadcasting 5 events from https://i.cal.to/ical/3/borussiadortmund/bundesliga-spielplan/cal-6.ics.
[20.03.2024 15:29.00.814] [INFO]  Calendar-Fetcher: Broadcasting 4 events from https://p63-caldav.icloud.com/published/2/MTA-cal-5.
[20.03.2024 15:29.00.869] [INFO]  updatenotification: You are using pm2 with MagicMirror
[20.03.2024 15:29.02.223] [INFO]  Calendar-Fetcher: Broadcasting 1 events from https://p63-caldav.icloud.com/published/2/MTA-cal-4.
[20.03.2024 15:29.04.265] [INFO]  Calendar-Fetcher: Broadcasting 7 events from https://p63-caldav.icloud.com/published/2/MTA-cal-3.
[20.03.2024 15:29.49.438] [INFO]  Calendar-Fetcher: Broadcasting 8 events from https://p63-caldav.icloud.com/published/2/MTA-cal-2.
[20.03.2024 15:30.30.417] [INFO]  Calendar-Fetcher: Broadcasting 12 events from https://p29-caldav.icloud.com/published/2/ODA-cal-1.

MMRIZE

@princemaxwell
Now I know what happens. Your symptom is not related with any errors.
Let me explain the process.

Each calendar parsing/fetching in the calendar module will take some time, a few seconds or some dozen seconds. How long will it take is unpredictable.
The default calendar module will refresh itself and broadcast accumulated events on any calendar fetched. So, in some unlucky cases, the module may flicker due to too-short-term refreshing.
CX3’s view is very complex and heavy for redrawing frequently. To avoid that flickering, CX3 will wait some time after any broadcasted event arrives (waitFetch: 5000ms by default) to check whether the following broadcasting will arrive in the short term. If no other followed broadcasting happens, stop waiting and process collected events at that moment and draw the view.
This means that if you have 8 calendars and 5 calendars complete fetching in 4 seconds and the other 3 calendars may take over 10 seconds, only the events from the earlier 5 calendars will be collected and prepared to show before the first rendering time(waitFetch 5000ms).
After the first rendering, the remaining 3 calendars may complete fetching. CX3 receives those events but does not render them instantly to avoid flickering. The rendering will be done every refreshInterval (by default 10 minutes) with stocked events that are received during that period.
That is the reason why some of your calendars will be shown the first time, but others are applied after 10 minutes.

So, you may have these options.

Do nothing. Just wait 10 minutes; the lazy events will normally be applied to CX3 from the second refreshing cycle. Calendar events are not regarded as needing urgent, instant reflection. Your MM may stay on for a long time. Ten minutes after the first bootup will not be a big issue, and your family will not care.
Or Give enough long waitFetch. Your log showed that almost 2 minute is needed to complete fetching 8 calendars entirely. waitFetch: 1000 * 60 * 2 may work. (The default value is 5000ms, not 300000) (This means you need 2 minutes before drawing the CX3 view at first time.)
Or Give shorter refreshInterval to redraw and reflect the change of events. The default value is 1000 * 60 * 10 (10 minutes) But you can assign shorter. But 99.99% of refreshing will deal unchanged same events. So I think it is a kind of waste. Anyway, if you want instant reflection, give it shorter value.

princemaxwell

@MMRIZE

All right, that makes complete sense.
I understand that now.

CX3 initially only recognizes broadcast events and does not know how many calendars are configured and waits until all of them have been processed.

(The default value is 5000ms, not 300000)

By the way, with the 300000 I meant the time from the default calendar, the “fetchInterval”, whose default value is: 300000 (5 minutes).

I tried the 2nd option, unfortunately it doesn’t work, I set it to 1000 * 60 * 2, but it takes exactly 10 minutes.

When and how often is waitFetch executed, just once? I would have expected CX3 to notice a broadcast and then update according to waitFetch.