Black Screen after installing fonts-noto-color-emoji

aunrea

@sdetweil I think when I tried to install mmpm that it didn’t install correctly. I did it again and everything seems fine except I still have a black screen. But somehow in the web using the ip address it loads fine. Why would I get a black screen on the pi but everything working on the web? I even made a change to make sure it wasn’t cached and the change showed up so it’s new.

aunrea

I have been getting the following error mm-error.log:


[12.08.2022 22:50.16.819] [WARN]  [33mYou're using a full whitelist configuration to allow for all IPs[39m
[1707:0812/225020.891765:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization
[1749:0812/225021.867756:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization
[1768:0812/225022.360451:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported.
/home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT
[12.08.2022 23:24.59.722] [WARN]  [33mYou're using a full whitelist configuration to allow for all IPs[39m
[1686:0812/232504.792579:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization
[1735:0812/232505.286195:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported.
[12.08.2022 23:46.19.653] [WARN]  [33mYou're using a full whitelist configuration to allow for all IPs[39m
[1623:0812/234649.995261:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization
[1766:0812/234650.598873:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported.

sdetweil

@aunrea are you running the 64 bit raspi os?

this is a configuration problem when using the Vulcan video driver.

aunrea

@sdetweil I am running the 32 bit raspi os. I used the official raspberry pi imager to create it.

aunrea

I think it’s a GPU issue. Could it have been a bad install of the os? Should I reinstall?

sdetweil

@aunrea I do not know

aunrea

Ok I am going to try a new install on my raspberry pi 4, instead of the 3B I have been using.

arosenhave

@aunrea any luck resolving this issue?
I have a fresh install of MM on an RPI4 (Rasbian OS 32bit) and get the same problem when installing MMM-Face-Reco-DNN. Only errors I have in the logs are the same GPU related ones.

And the strange thing is that I have the exact same setup on a different SD card done 6 weeks ago. And that works perfectly. It reporst my MM is outdated, but I don’t dare updating it now.

sdetweil

@arosenhave depends on which video driver is enabled in /boot/config.txt

edit the script which starts MM
and add

export ELECTRON_DISABLE_GPU=1

before the
npm start
line

sdetweil

@arosenhave if u want to upgrade, use my script
see
https://github.com/sdetweil/MagicMirror_scripts

and backup

see https://github.com/sdetweil/MagicMirror-backup-restore