Read the statement by Michael Teeuw here.
MMM-EnergyMonitor help
-
Hello everyone
https://github.com/deg0nz/MMM-EnergyMonitor
I’m having no luck with this module and was wondering if anyone else has had any? I understand this module calls data from MMM-Fronius2 module which I have working., Below is a picture and you can see the data from the Fronius2 module on the left is working but nothing on the EnergyMonitor module.
I’m not sure where to begin troubleshooting this I think the problem is in how the two modules communicate any ideas?
-
@mayfield can you show the config if the two modules, and any messenger in the console output, or in the developers window console ctrl-shift-i on the keyboard, select the console tab and scroll up to see any messages in red
-
@sdetweil said in MMM-EnergyMonitor help:
@mayfield can you show the config if the two modules, and any messenger in the console output, or in the developers window console ctrl-shift-i on the keyboard, select the console tab and scroll up to see any messages in red
Here is a photo of the console screen.
-
@mayfield open a terminal window and do
touch ~/MagicMirror/css/custom.cssthat will make the error go away on next load of mm, you can do that with ctrl-r
ctrl-shift-i to get out of developer mode
-
@mayfield how about messages where u start mm
if npm start
or of pm2, then
pm2 logs --lines=50 -
@sdetweil Do I run npm start pm2 logs --lines=50?
-
@mayfield no
how do you start MM?
npm start
or
pm2
if pm2 then
pm2 logs --lines=50in eaither case u may need to redirect the output to a file
npm start > somefile.txt
or
pm2 logs --liness=50 > somefile.txt -
@sdetweil Hear are somefile.txt and my config.js
> magicmirror@2.21.0 start > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js [09.10.2022 09:14.04.452] [LOG] Starting MagicMirror: v2.21.0 [09.10.2022 09:14.04.467] [LOG] Loading config ... [09.10.2022 09:14.04.483] [LOG] Loading module helpers ... [09.10.2022 09:14.04.487] [LOG] No helper found for module: alert. [09.10.2022 09:14.04.523] [LOG] Initializing new module helper ... [09.10.2022 09:14.04.526] [LOG] Module helper loaded: updatenotification [09.10.2022 09:14.04.529] [LOG] No helper found for module: clock. [09.10.2022 09:14.04.968] [LOG] Initializing new module helper ... [09.10.2022 09:14.04.977] [LOG] Module helper loaded: calendar [09.10.2022 09:14.05.125] [LOG] Initializing new module helper ... [09.10.2022 09:14.05.149] [LOG] Module helper loaded: MMM-Fronius2 [09.10.2022 09:14.05.153] [LOG] No helper found for module: MMM-EnergyMonitor. [09.10.2022 09:14.05.156] [LOG] No helper found for module: weather. [09.10.2022 09:14.05.212] [LOG] Initializing new module helper ... [09.10.2022 09:14.05.213] [LOG] Module helper loaded: newsfeed [09.10.2022 09:14.05.215] [LOG] All module helpers loaded. [09.10.2022 09:14.05.439] [LOG] Starting server on port 8080 ... [09.10.2022 09:14.05.470] [LOG] Server started ... [09.10.2022 09:14.05.472] [LOG] Connecting socket for: updatenotification [09.10.2022 09:14.05.474] [LOG] Starting module helper: updatenotification [09.10.2022 09:14.05.475] [LOG] Connecting socket for: calendar [09.10.2022 09:14.05.477] [LOG] Starting node helper for: calendar [09.10.2022 09:14.05.483] [LOG] Connecting socket for: MMM-Fronius2 [09.10.2022 09:14.05.484] [LOG] Starting module helper: MMM-Fronius2 [09.10.2022 09:14.05.486] [LOG] Connecting socket for: newsfeed [09.10.2022 09:14.05.488] [LOG] Starting node helper for: newsfeed [09.10.2022 09:14.05.489] [LOG] Sockets connected & modules started ... [09.10.2022 09:14.05.950] [LOG] Launching application. [09.10.2022 09:14.11.582] [LOG] Create new calendarfetcher for url: https://www.vic.gov.au/sites/default/files/2019-02/Victorian-school-term-dates.ics - Interval: 300000 [09.10.2022 09:14.11.670] [LOG] Create new calendarfetcher for url: https://www.vic.gov.au/sites/default/files/2021-09/Victorian-public-holiday-dates.ics - Interval: 300000 [09.10.2022 09:14.11.687] [LOG] Create new newsfetcher for url: https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml - Interval: 300000 [09.10.2022 09:14.11.696] [INFO] Checking git for module: MMM-Fronius2 [09.10.2022 09:14.11.745] [INFO] Checking git for module: MMM-EnergyMonitor [09.10.2022 09:14.11.796] [INFO] Checking git for module: default [09.10.2022 09:14.12.782] [INFO] Calendar-Fetcher: Broadcasting 14 events. [09.10.2022 09:14.14.376] [INFO] Newsfeed-Fetcher: Broadcasting 34 items./* MagicMirror² Config Sample * * By Michael Teeuw https://michaelteeuw.nl * MIT Licensed. * * For more information on how you can configure this file * see https://docs.magicmirror.builders/configuration/introduction.html * and https://docs.magicmirror.builders/modules/configuration.html */ let config = { address: "localhost", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080, basePath: "/", // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy // you must set the sub path here. basePath must end with a / ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], useHttps: false, // Support HTTPS or not, default "false" will use HTTP httpsPrivateKey: "", // HTTPS private key path, only require when useHttps is true httpsCertificate: "", // HTTPS Certificate path, only require when useHttps is true language: "en", locale: "en-AU", logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging timeFormat: 24, units: "metric", // serverOnly: true/false/"local" , // local for armv6l processors, default // starts serveronly and then starts chrome browser // false, default for all NON-armv6l devices // true, force serveronly mode, because you want to.. no UI on this device modules: [ { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: "calendar", header: "Holidays", position: "top_left", config: { calendars: [ { symbol: "calendar-check", maximumEntries: '4', //url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics" url: "https://www.vic.gov.au/sites/default/files/2019-02/Victorian-school-term-dates.ics" }, { symbol: "birthday-cake", maximumEntries: "10", url: "https://www.vic.gov.au/sites/default/files/2021-09/Victorian-public-holiday-dates.ics", } ] } }, { module: 'MMM-Fronius2', position: "top_left", header: "Solar Panels", hidden: false, ip: "192.168.2.146", updateInterval: 3000, wattConversionOptions: { enabled: true, threshold: 1200, numDecimalDigits: 2, }, offlineDetectionOptions: { numRequests: 5, // Converter is considered offline after this num of failed requests offlineInterval: 1800000, // 30 Minutes }, requestTimeout: 1000, broadcastSolarPower: true, broadcastGridPower: true, broadcastBatteryPower: true, dummyData: false, }, { module: 'MMM-EnergyMonitor', disabled: false, position: 'middle_center', hidden: false, updateInterval: 3000, energyStorage: false, width: "100px", height: "100px", lineWidth: "8px", resetCycles: 3, logNotifications: false, wattConversionOptions: { enabled: true, threshold: 1200, numDecimalDigits: 2, }, iconCssClasses: { home: "fas fa-home", grid: "fas fa-plug", energyStorage: "fas fa-battery-half", localPowerSource: "fas fa-solar-panel", } }, { module: "compliments", disabled: true, position: "lower_third" }, { module: "weather", position: "top_right", config: { weatherProvider: "openweathermap", type: "current", location: "Fawkner, AU", locationID: "2166819", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city apiKey: "7e845e5fc36ce2a73900ec4152ca884c" } }, { module: "weather", position: "top_right", header: "Weather Forecast", config: { weatherProvider: "openweathermap", type: "forecast", location: "Fawkner, AU", locationID: "2166819", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city apiKey: "7e845e5fc36ce2a73900ec4152ca884c" } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "New York Times", url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml" } ], showSourceTitle: true, showPublishDate: true, broadcastNewsFeeds: true, broadcastNewsUpdates: true } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") {module.exports = config;}
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login